@@ -225,8 +225,6 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
/*-------------------------------------------------------------------------*/
-#include "../../../arch/arm/mach-omap2/cm-regbits-34xx.h"
-
/* omap_start_ehc
* - Start the TI USBHOST controller
*/
@@ -239,29 +237,6 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
dev_dbg(omap->dev, "starting TI EHCI USB Controller\n");
- /* Start DPLL5 Programming:
- * Clock Framework is not doing this now:
- * This will be done in clock framework later
- */
- /* Enable DPLL 5 : Based on Input of 13Mhz*/
- cm_write_mod_reg((12 << OMAP3430ES2_PERIPH2_DPLL_DIV_SHIFT)|
- (120 << OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT),
- PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
-
- cm_write_mod_reg(1 << OMAP3430ES2_DIV_120M_SHIFT,
- PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
-
- cm_write_mod_reg((7 << OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT) |
- (7 << OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT),
- PLL_MOD, OMAP3430ES2_CM_CLKEN2);
-
- while (!(cm_read_mod_reg(PLL_MOD, CM_IDLEST2) &
- OMAP3430ES2_ST_PERIPH2_CLK_MASK))
- dev_dbg(omap->dev, "idlest2 = 0x%x\n",
- cm_read_mod_reg(PLL_MOD, CM_IDLEST2));
- /* End DPLL5 programming */
-
-
/* Enable Clocks for USBHOST */
omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick");
if (IS_ERR(omap->usbhost_ick)) {