@@ -85,6 +85,8 @@ struct omap3_scratchpad_sdrc_block {
u32 block_size;
};
+void *omap3_secure_ram_storage;
+
/*
* This is used to store ARM registers in SDRAM before attempting
* an MPU OFF. The save and restore happens from the SRAM sleep code.
@@ -209,7 +211,11 @@ void omap3_save_scratchpad_contents(void)
scratchpad_contents.boot_config_ptr = 0x0;
scratchpad_contents.public_restore_ptr =
virt_to_phys(get_restore_pointer());
- scratchpad_contents.secure_ram_restore_ptr = 0x0;
+ if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+ scratchpad_contents.secure_ram_restore_ptr = 0x0;
+ else
+ scratchpad_contents.secure_ram_restore_ptr =
+ (u32) __pa(omap3_secure_ram_storage);
scratchpad_contents.sdrc_module_semaphore = 0x0;
scratchpad_contents.prcm_block_offset = 0x2C;
scratchpad_contents.sdrc_block_offset = 0x64;
@@ -13,6 +13,8 @@
#include <plat/powerdomain.h>
+extern void *omap3_secure_ram_storage;
+
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
@@ -36,6 +38,7 @@ extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
extern void save_secure_ram_context(u32 *addr);
+extern void omap3_save_scratchpad_contents(void);
extern unsigned int omap24xx_idle_loop_suspend_sz;
extern unsigned int omap34xx_suspend_sz;
@@ -63,6 +63,8 @@ static LIST_HEAD(pwrst_list);
static void (*_omap_sram_idle)(u32 *addr, int save_state);
+static int (*_omap_save_secure_sram)(u32 *addr);
+
static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
static struct powerdomain *core_pwrdm, *per_pwrdm;
@@ -110,6 +112,33 @@ static void omap3_core_restore_context(void)
omap_dma_global_context_restore();
}
+static void omap3_save_secure_ram_context(u32 target_mpu_state)
+{
+ u32 ret;
+
+ if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+ /* Disable dma irq before calling secure rom code API */
+ omap_dma_disable_irq(0);
+ omap_dma_disable_irq(1);
+ /*
+ * MPU next state must be set to POWER_ON temporarily,
+ * otherwise the WFI executed inside the ROM code
+ * will hang the system.
+ */
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
+ ret = _omap_save_secure_sram((u32 *)
+ __pa(omap3_secure_ram_storage));
+ pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+ /* Following is for error tracking, it should not happen */
+ if (ret) {
+ printk(KERN_ERR "save_secure_sram() returns %08x\n",
+ ret);
+ while (1)
+ ;
+ }
+ }
+}
+
/*
* PRCM Interrupt Handler Helper Function
*
@@ -308,6 +337,7 @@ static void omap_sram_idle(void)
if (core_next_state == PWRDM_POWER_OFF) {
omap3_core_save_context();
omap3_prcm_save_context();
+ omap3_save_secure_ram_context(mpu_next_state);
}
/* Enable IO-PAD wakeup */
prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
@@ -901,6 +931,9 @@ void omap_push_sram_idle(void)
{
_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
omap34xx_cpu_suspend_sz);
+ if (omap_type() != OMAP2_DEVICE_TYPE_GP)
+ _omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
+ save_secure_ram_context_sz);
}
static int __init omap3_pm_init(void)
@@ -916,7 +949,6 @@ static int __init omap3_pm_init(void)
/* XXX prcm_setup_regs needs to be before enabling hw
* supervised mode for powerdomains */
prcm_setup_regs();
- omap3_save_scratchpad_contents();
ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
(irq_handler_t)prcm_interrupt_handler,
@@ -961,6 +993,15 @@ static int __init omap3_pm_init(void)
*/
pwrdm_add_wkdep(per_pwrdm, core_pwrdm);
+ if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+ omap3_secure_ram_storage =
+ kmalloc(0x803F, GFP_KERNEL);
+ if (!omap3_secure_ram_storage)
+ printk(KERN_ERR "Memory allocation failed when"
+ "allocating for secure sram context\n");
+ }
+ omap3_save_scratchpad_contents();
+
err1:
return ret;
err2:
@@ -37,6 +37,8 @@
#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
OMAP3430_PM_PREPWSTST)
#define PM_PWSTCTRL_MPU_P OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL
+#define SRAM_BASE_P 0x40200000
+#define CONTROL_STAT 0x480022F0
#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
* available */
#define SCRATCHPAD_BASE_P (OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
@@ -51,6 +53,40 @@ ENTRY(get_restore_pointer)
ldmfd sp!, {pc} @ restore regs and return
ENTRY(get_restore_pointer_sz)
.word . - get_restore_pointer_sz
+
+/* Function to call rom code to save secure ram context */
+ENTRY(save_secure_ram_context)
+ stmfd sp!, {r1-r12, lr} @ save registers on stack
+save_secure_ram_debug:
+ /* b save_secure_ram_debug */ @ enable to debug save code
+ adr r3, api_params @ r3 points to parameters
+ str r0, [r3,#0x4] @ r0 has sdram address
+ ldr r12, high_mask
+ and r3, r3, r12
+ ldr r12, sram_phy_addr_mask
+ orr r3, r3, r12
+ mov r0, #25 @ set service ID for PPA
+ mov r12, r0 @ copy secure service ID in r12
+ mov r1, #0 @ set task id for ROM code in r1
+ mov r2, #7 @ set some flags in r2, r6
+ mov r6, #0xff
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
+ .word 0xE1600071 @ call SMI monitor (smi #1)
+ nop
+ nop
+ nop
+ nop
+ ldmfd sp!, {r1-r12, pc}
+sram_phy_addr_mask:
+ .word SRAM_BASE_P
+high_mask:
+ .word 0xffff
+api_params:
+ .word 0x4, 0x0, 0x0, 0x1, 0x1
+ENTRY(save_secure_ram_context_sz)
+ .word . - save_secure_ram_context
+
/*
* Forces OMAP into idle state
*
@@ -107,9 +143,44 @@ restore:
moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
bne logic_l1_restore
+ ldr r0, control_stat
+ ldr r1, [r0]
+ and r1, #0x700
+ cmp r1, #0x300
+ beq l2_inv_gp
+ mov r0, #40 @ set service ID for PPA
+ mov r12, r0 @ copy secure Service ID in r12
+ mov r1, #0 @ set task id for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
+ mov r6, #0xff
+ adr r3, l2_inv_api_params @ r3 points to dummy parameters
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
+ .word 0xE1600071 @ call SMI monitor (smi #1)
+ /* Write to Aux control register to set some bits */
+ mov r0, #42 @ set service ID for PPA
+ mov r12, r0 @ copy secure Service ID in r12
+ mov r1, #0 @ set task id for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
+ mov r6, #0xff
+ adr r3, write_aux_control_params @ r3 points to parameters
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
+ .word 0xE1600071 @ call SMI monitor (smi #1)
+
+ b logic_l1_restore
+l2_inv_api_params:
+ .word 0x1, 0x00
+write_aux_control_params:
+ .word 0x1, 0x72
+l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalide L2
-smi: .word 0xE1600070 @ Call SMI monitor (smieq)
+smi: .word 0xE1600070 @ Call SMI monitor (smieq)
+ /* Write to Aux control register to set some bits */
+ mov r0, #0x72
+ mov r12, #0x3
+ .word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
mov r1, #0
/* Invalidate all instruction caches to PoU
@@ -429,5 +500,7 @@ table_entry:
.word 0x00000C02
cache_pred_disable_mask:
.word 0xFFFFE7FB
+control_stat:
+ .word CONTROL_STAT
ENTRY(omap34xx_cpu_suspend_sz)
.word . - omap34xx_cpu_suspend