@@ -26,6 +26,8 @@
#include <plat/prcm.h>
#include <plat/powerdomain.h>
+#include <plat/irqs.h>
+#include <plat/control.h>
#ifdef CONFIG_CPU_IDLE
@@ -50,10 +52,12 @@ struct omap3_processor_cx {
struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
struct omap3_processor_cx current_cx_state;
-struct powerdomain *mpu_pd;
+struct powerdomain *mpu_pd, *core_pd;
static int omap3_idle_bm_check(void)
{
+ if (!omap3_can_sleep())
+ return 1;
return 0;
}
@@ -79,24 +83,23 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
local_irq_disable();
local_fiq_disable();
- /* Program MPU to target state */
- if (cx->mpu_state < PWRDM_POWER_ON)
- pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state);
+ set_pwrdm_state(mpu_pd, cx->mpu_state);
+ set_pwrdm_state(core_pd, cx->core_state);
+
+ if (omap_irq_pending())
+ goto return_sleep_time;
/* Execute ARM wfi */
omap_sram_idle();
- /* Program MPU to ON */
- if (cx->mpu_state < PWRDM_POWER_ON)
- pwrdm_set_next_pwrst(mpu_pd, PWRDM_POWER_ON);
-
+return_sleep_time:
getnstimeofday(&ts_postidle);
ts_idle = timespec_sub(ts_postidle, ts_preidle);
local_irq_enable();
local_fiq_enable();
- return timespec_to_ns(&ts_idle);
+ return (u32)timespec_to_ns(&ts_idle)/1000;
}
/**
@@ -153,7 +156,7 @@ void omap_init_power_states(void)
omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
/* C3 . MPU OFF + Core active */
- omap3_power_states[OMAP3_STATE_C3].valid = 0;
+ omap3_power_states[OMAP3_STATE_C3].valid = 1;
omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3;
omap3_power_states[OMAP3_STATE_C3].sleep_latency = 1500;
omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 1800;
@@ -163,7 +166,7 @@ void omap_init_power_states(void)
omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID;
/* C4 . MPU CSWR + Core CSWR*/
- omap3_power_states[OMAP3_STATE_C4].valid = 0;
+ omap3_power_states[OMAP3_STATE_C4].valid = 1;
omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4;
omap3_power_states[OMAP3_STATE_C4].sleep_latency = 2500;
omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 7500;
@@ -174,7 +177,7 @@ void omap_init_power_states(void)
CPUIDLE_FLAG_CHECK_BM;
/* C5 . MPU OFF + Core CSWR */
- omap3_power_states[OMAP3_STATE_C5].valid = 0;
+ omap3_power_states[OMAP3_STATE_C5].valid = 1;
omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5;
omap3_power_states[OMAP3_STATE_C5].sleep_latency = 3000;
omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 8500;
@@ -215,6 +218,7 @@ int omap3_idle_init(void)
struct cpuidle_device *dev;
mpu_pd = pwrdm_lookup("mpu_pwrdm");
+ core_pd = pwrdm_lookup("core_pwrdm");
omap_init_power_states();
cpuidle_register_driver(&omap3_idle_driver);
@@ -19,6 +19,8 @@ extern u32 sleep_while_idle;
extern void *omap3_secure_ram_storage;
extern void omap3_pm_off_mode_enable(int);
extern void omap_sram_idle(void);
+extern int omap3_can_sleep(void);
+extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
@@ -76,8 +76,6 @@ static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
static struct powerdomain *core_pwrdm, *per_pwrdm;
static struct powerdomain *cam_pwrdm;
-static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
-
static inline void omap3_per_save_context(void)
{
omap_gpio_save_context();
@@ -503,7 +501,7 @@ static int omap3_fclks_active(void)
return 0;
}
-static int omap3_can_sleep(void)
+int omap3_can_sleep(void)
{
if (!sleep_while_idle)
return 0;
@@ -517,7 +515,7 @@ static int omap3_can_sleep(void)
/* This sets pwrdm state (other than mpu & core. Currently only ON &
* RET are supported. Function is assuming that clkdm doesn't have
* hw_sup mode enabled. */
-static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
{
u32 cur_state;
int sleep_switch = 0;