From patchwork Tue Nov 3 21:20:10 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: vikram pandita X-Patchwork-Id: 57377 X-Patchwork-Delegate: tony@atomide.com Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id nA3LLOZV025416 for ; Tue, 3 Nov 2009 21:21:25 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755010AbZKCVVS (ORCPT ); Tue, 3 Nov 2009 16:21:18 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755173AbZKCVVR (ORCPT ); Tue, 3 Nov 2009 16:21:17 -0500 Received: from comal.ext.ti.com ([198.47.26.152]:50114 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754436AbZKCVVM (ORCPT ); Tue, 3 Nov 2009 16:21:12 -0500 Received: from dlep36.itg.ti.com ([157.170.170.91]) by comal.ext.ti.com (8.13.7/8.13.7) with ESMTP id nA3LLHre009316 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO) for ; Tue, 3 Nov 2009 15:21:17 -0600 Received: from legion.dal.design.ti.com (localhost [127.0.0.1]) by dlep36.itg.ti.com (8.13.8/8.13.8) with ESMTP id nA3LLE33028673; Tue, 3 Nov 2009 15:21:14 -0600 (CST) Received: from vip-tid (lta0307903-128247075087.am.dhcp.ti.com [128.247.75.87]) by legion.dal.design.ti.com (8.11.7p1+Sun/8.11.7) with ESMTP id nA3LLEZ02670; Tue, 3 Nov 2009 15:21:14 -0600 (CST) Received: from vip-tid (localhost.localdomain [127.0.0.1]) by vip-tid (Postfix) with ESMTP id A6ECF29CC28; Tue, 3 Nov 2009 15:20:17 -0600 (CST) Received: (from vikram@localhost) by vip-tid (8.14.3/8.14.3/Submit) id nA3LKH3h006502; Tue, 3 Nov 2009 15:20:17 -0600 X-Authentication-Warning: vip-tid: vikram set sender to vikram.pandita@ti.com using -f From: Vikram Pandita To: linux-omap@vger.kernel.org Cc: Vikram Pandita , Vikram Pandita Subject: [PATCH 3/8] omap: zoom2: split baord file for reuse Date: Tue, 3 Nov 2009 15:20:10 -0600 Message-Id: <1257283215-6448-4-git-send-email-vikram.pandita@ti.com> X-Mailer: git-send-email 1.6.5.1.69.g36942 In-Reply-To: <1257283215-6448-3-git-send-email-vikram.pandita@ti.com> References: <1257283215-6448-1-git-send-email-vikram.pandita@ti.com> <1257283215-6448-2-git-send-email-vikram.pandita@ti.com> <1257283215-6448-3-git-send-email-vikram.pandita@ti.com> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 03cb4fc..4d66b42 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -72,6 +72,7 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ board-rx51-peripherals.o \ mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \ + board-zoom-peripherals.o \ mmc-twl4030.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c new file mode 100755 index 0000000..c799eca --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -0,0 +1,414 @@ +/* + * Copyright (C) 2009 Texas Instruments Inc. + * + * Modified from mach-omap2/board-ldp.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include "mmc-twl4030.h" + +/* Zoom2 has Qwerty keyboard*/ +static int board_keymap[] = { + KEY(0, 0, KEY_E), + KEY(1, 0, KEY_R), + KEY(2, 0, KEY_T), + KEY(3, 0, KEY_HOME), + KEY(6, 0, KEY_I), + KEY(7, 0, KEY_LEFTSHIFT), + KEY(0, 1, KEY_D), + KEY(1, 1, KEY_F), + KEY(2, 1, KEY_G), + KEY(3, 1, KEY_SEND), + KEY(6, 1, KEY_K), + KEY(7, 1, KEY_ENTER), + KEY(0, 2, KEY_X), + KEY(1, 2, KEY_C), + KEY(2, 2, KEY_V), + KEY(3, 2, KEY_END), + KEY(6, 2, KEY_DOT), + KEY(7, 2, KEY_CAPSLOCK), + KEY(0, 3, KEY_Z), + KEY(1, 3, KEY_KPPLUS), + KEY(2, 3, KEY_B), + KEY(3, 3, KEY_F1), + KEY(6, 3, KEY_O), + KEY(7, 3, KEY_SPACE), + KEY(0, 4, KEY_W), + KEY(1, 4, KEY_Y), + KEY(2, 4, KEY_U), + KEY(3, 4, KEY_F2), + KEY(4, 4, KEY_VOLUMEUP), + KEY(6, 4, KEY_L), + KEY(7, 4, KEY_LEFT), + KEY(0, 5, KEY_S), + KEY(1, 5, KEY_H), + KEY(2, 5, KEY_J), + KEY(3, 5, KEY_F3), + KEY(5, 5, KEY_VOLUMEDOWN), + KEY(6, 5, KEY_M), + KEY(4, 5, KEY_ENTER), + KEY(7, 5, KEY_RIGHT), + KEY(0, 6, KEY_Q), + KEY(1, 6, KEY_A), + KEY(2, 6, KEY_N), + KEY(3, 6, KEY_BACKSPACE), + KEY(6, 6, KEY_P), + KEY(7, 6, KEY_UP), + KEY(6, 7, KEY_SELECT), + KEY(7, 7, KEY_DOWN), + KEY(0, 7, KEY_PROG1), /*MACRO 1 */ + KEY(1, 7, KEY_PROG2), /*MACRO 2 */ + KEY(2, 7, KEY_PROG3), /*MACRO 3 */ + KEY(3, 7, KEY_PROG4), /*MACRO 4 */ + 0 +}; + +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + +static struct twl4030_keypad_data zoom_kp_twl4030_data = { + .keymap_data = &board_map_data, + .rows = 8, + .cols = 8, + .rep = 1, +}; + +static struct twl4030_madc_platform_data zoom_madc_data = { + .irq_line = 1, +}; + +static struct twl4030_hsmmc_info mmc[] = { + { + .name = "external", + .mmc = 1, + .wires = 4, + .cover_only = true, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .power_saving = true, + }, + { + .name = "internal", + .mmc = 2, + .wires = 8, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .nonremovable = true, + .power_saving = true, + }, + {} /* Terminator */ +}; + +static struct regulator_consumer_supply zoom_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply zoom_vmmc2_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply zoom_vsim_supply = { + .supply = "vmmc_aux", +}; + +/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ +static struct regulator_init_data zoom_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vmmc1_supply, +}; + +/* VMMC2 for MMC2 card */ +static struct regulator_init_data zoom_vmmc2 = { + .constraints = { + .name = "VMMC2_30", + .min_uV = 1850000, + .max_uV = 1850000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vmmc2_supply, +}; + +/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ +static struct regulator_init_data zoom_vsim = { + .constraints = { + .name = "VMMC2_IO_18", + .min_uV = 1800000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vsim_supply, +}; + +static int zoom_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ), + * gpio + 1 is "mmc1_cd" (input/IRQ) + */ + mmc[0].gpio_cd = gpio + 0; + mmc[1].gpio_cd = gpio + 1; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters ... we "know" the + * regulators will be set up only *after* we return. + */ + zoom_vmmc1_supply.dev = mmc[0].dev; + zoom_vmmc2_supply.dev = mmc[1].dev; + zoom_vsim_supply.dev = mmc[0].dev; + + return 0; +} + +//static struct twl4030_gpio_platform_data zoom_gpio_data = { +// .gpio_base = OMAP_MAX_GPIO_LINES, +// .irq_base = TWL4030_GPIO_IRQ_BASE, +// .irq_end = TWL4030_GPIO_IRQ_END, +// .pulldowns = BIT(0) | BIT(1) | BIT(2) | BIT(3) +// | BIT(4) | BIT(5) +// | BIT(8) | BIT(9) | BIT(10) | BIT(11) +// | BIT(12) | BIT(13) | BIT(14) | BIT(15) +// | BIT(16) | BIT(17) , +// .setup = zoom_twlgpio_setup, +//}; +static struct twl4030_gpio_platform_data zoom_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .setup = zoom_twl_gpio_setup, +}; + +static struct twl4030_usb_data zoom_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +/* TODO: enable T2 scripts */ +#if 0 +static struct twl4030_ins sleep_on_seq[] __initdata = { +/* + * Turn off VDD1 and VDD2. + */ + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4}, + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2}, +/* + * And also turn off the OMAP3 PLLs and the sysclk output. + */ + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3}, + {MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3}, +}; + +static struct twl4030_script sleep_on_script __initdata = { + .script = sleep_on_seq, + .size = ARRAY_SIZE(sleep_on_seq), + .flags = TWL4030_SLEEP_SCRIPT, +}; + +static struct twl4030_ins wakeup_seq[] __initdata = { +/* + * Reenable the OMAP3 PLLs. + * Wakeup VDD1 and VDD2. + * Reenable sysclk output. + */ + {MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30}, + {MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30}, + {MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37}, + {MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3}, +}; + +static struct twl4030_script wakeup_script __initdata = { + .script = wakeup_seq, + .size = ARRAY_SIZE(wakeup_seq), + .flags = TWL4030_WAKEUP12_SCRIPT, +}; + +static struct twl4030_ins wakeup_p3_seq[] __initdata = { +/* + * Wakeup VDD1 (dummy to be able to insert a delay) + * Enable CLKEN + */ + {MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3}, +}; + +static struct twl4030_script wakeup_p3_script __initdata = { + .script = wakeup_p3_seq, + .size = ARRAY_SIZE(wakeup_p3_seq), + .flags = TWL4030_WAKEUP3_SCRIPT, +}; + +static struct twl4030_ins wrst_seq[] __initdata = { +/* + * Reset twl4030. + * Reset VDD1 regulator. + * Reset VDD2 regulator. + * Reset VPLL1 regulator. + * Enable sysclk output. + * Reenable twl4030. + */ + {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE), + 0x13}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13}, + {MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35}, + {MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2}, + {MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2}, +}; + +static struct twl4030_script wrst_script __initdata = { + .script = wrst_seq, + .size = ARRAY_SIZE(wrst_seq), + .flags = TWL4030_WRST_SCRIPT, +}; + +static struct twl4030_script *twl4030_scripts[] __initdata = { + /* wakeup12 script should be loaded before sleep script, otherwise a + board might hit retention before loading of wakeup script is + completed. This can cause boot failures depending on timing issues. + */ + &wakeup_script, + &sleep_on_script, + &wakeup_p3_script, + &wrst_script, +}; + +static struct twl4030_resconfig twl4030_rconfig[] __initdata = { + { .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 }, + { .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 }, + { .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 }, + { .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1, + .type2 = 3}, + { .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3}, + { .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1, + .type2 = 3}, + { .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1, + .type2 = 1 }, + { 0, 0}, +}; + +static struct twl4030_power_data zoom_t2scripts_data __initdata = { + .scripts = twl4030_scripts, + .num = ARRAY_SIZE(twl4030_scripts), + .resource_config = twl4030_rconfig, +}; +#endif + +static int zoom_batt_table[] = { +/* 0 C*/ +30800, 29500, 28300, 27100, +26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, +17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, +11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, +8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, +5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, +4040, 3910, 3790, 3670, 3550 +}; + +static struct twl4030_bci_platform_data zoom_bci_data = { + .battery_tmp_tbl = zoom_batt_table, + .tblsize = ARRAY_SIZE(zoom_batt_table), +}; + + +static struct twl4030_platform_data zoom_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .bci = &zoom_bci_data, + .madc = &zoom_madc_data, + .usb = &zoom_usb_data, + .gpio = &zoom_gpio_data, + .keypad = &zoom_kp_twl4030_data, + /* .power = &zoom_t2scripts_data,*/ + .vmmc1 = &zoom_vmmc1, + .vmmc2 = &zoom_vmmc2, + /* .vaux1 = &zoom_vaux1,*/ + /* .vaux2 = &zoom_vaux2,*/ + /* .vaux4 = &zoom_vaux4,*/ + .vsim = &zoom_vsim, + /* .vdac = &zoom_vdac,*/ +}; + +static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl5030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &zoom_twldata, + }, +}; + +static int __init zoom_i2c_init(void) +{ + omap_register_i2c_bus(1, 2200, zoom_i2c_boardinfo, + ARRAY_SIZE(zoom_i2c_boardinfo)); + + /* TODO: I2C2 on zoom2/3: + * Add Synaptic RMI controller + * Add Camera sensor IMX046 + * Add Camera sensor LV8093 + */ + omap_register_i2c_bus(2, 100, NULL, 0); + + /* TODO: I2C3 on Zoom2/3: + * Add: SIL9022 HDMI + */ + omap_register_i2c_bus(3, 100, NULL, 0); + return 0; +} + + +void __init zoom_peripherals_init(void) +{ + zoom_i2c_init(); + omap_serial_init(); + usb_musb_init(); +} diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c old mode 100644 new mode 100755 index 4ad9b94..abcc1ae --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -1,8 +1,6 @@ /* * Copyright (C) 2009 Texas Instruments Inc. - * Mikkel Christensen * - * Modified from mach-omap2/board-ldp.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,280 +11,49 @@ #include #include #include -#include #include -#include -#include #include #include #include -#include +#include -#include "mmc-twl4030.h" #include "sdram-micron-mt46h32m32lf-6.h" -/* Zoom2 has Qwerty keyboard*/ -static int board_keymap[] = { - KEY(0, 0, KEY_E), - KEY(1, 0, KEY_R), - KEY(2, 0, KEY_T), - KEY(3, 0, KEY_HOME), - KEY(6, 0, KEY_I), - KEY(7, 0, KEY_LEFTSHIFT), - KEY(0, 1, KEY_D), - KEY(1, 1, KEY_F), - KEY(2, 1, KEY_G), - KEY(3, 1, KEY_SEND), - KEY(6, 1, KEY_K), - KEY(7, 1, KEY_ENTER), - KEY(0, 2, KEY_X), - KEY(1, 2, KEY_C), - KEY(2, 2, KEY_V), - KEY(3, 2, KEY_END), - KEY(6, 2, KEY_DOT), - KEY(7, 2, KEY_CAPSLOCK), - KEY(0, 3, KEY_Z), - KEY(1, 3, KEY_KPPLUS), - KEY(2, 3, KEY_B), - KEY(3, 3, KEY_F1), - KEY(6, 3, KEY_O), - KEY(7, 3, KEY_SPACE), - KEY(0, 4, KEY_W), - KEY(1, 4, KEY_Y), - KEY(2, 4, KEY_U), - KEY(3, 4, KEY_F2), - KEY(4, 4, KEY_VOLUMEUP), - KEY(6, 4, KEY_L), - KEY(7, 4, KEY_LEFT), - KEY(0, 5, KEY_S), - KEY(1, 5, KEY_H), - KEY(2, 5, KEY_J), - KEY(3, 5, KEY_F3), - KEY(5, 5, KEY_VOLUMEDOWN), - KEY(6, 5, KEY_M), - KEY(4, 5, KEY_ENTER), - KEY(7, 5, KEY_RIGHT), - KEY(0, 6, KEY_Q), - KEY(1, 6, KEY_A), - KEY(2, 6, KEY_N), - KEY(3, 6, KEY_BACKSPACE), - KEY(6, 6, KEY_P), - KEY(7, 6, KEY_UP), - KEY(6, 7, KEY_SELECT), - KEY(7, 7, KEY_DOWN), - KEY(0, 7, KEY_PROG1), /*MACRO 1 */ - KEY(1, 7, KEY_PROG2), /*MACRO 2 */ - KEY(2, 7, KEY_PROG3), /*MACRO 3 */ - KEY(3, 7, KEY_PROG4), /*MACRO 4 */ - 0 -}; - -static struct matrix_keymap_data board_map_data = { - .keymap = board_keymap, - .keymap_size = ARRAY_SIZE(board_keymap), -}; - -static struct twl4030_keypad_data zoom2_kp_twl4030_data = { - .keymap_data = &board_map_data, - .rows = 8, - .cols = 8, - .rep = 1, -}; - -static struct omap_board_config_kernel zoom2_config[] __initdata = { -}; - -static struct regulator_consumer_supply zoom2_vmmc1_supply = { - .supply = "vmmc", -}; - -static struct regulator_consumer_supply zoom2_vsim_supply = { - .supply = "vmmc_aux", -}; - -static struct regulator_consumer_supply zoom2_vmmc2_supply = { - .supply = "vmmc", -}; - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data zoom2_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vmmc1_supply, -}; - -/* VMMC2 for MMC2 card */ -static struct regulator_init_data zoom2_vmmc2 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 1850000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vmmc2_supply, -}; - -/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ -static struct regulator_init_data zoom2_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom2_vsim_supply, -}; - -static struct twl4030_hsmmc_info mmc[] __initdata = { - { - .mmc = 1, - .wires = 4, - .gpio_wp = -EINVAL, - }, - { - .mmc = 2, - .wires = 4, - .gpio_wp = -EINVAL, - }, - {} /* Terminator */ -}; - -static int zoom2_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) +static void __init omap_zoom_map_io(void) { - /* gpio + 0 is "mmc0_cd" (input/IRQ), - * gpio + 1 is "mmc1_cd" (input/IRQ) - */ - mmc[0].gpio_cd = gpio + 0; - mmc[1].gpio_cd = gpio + 1; - twl4030_mmc_init(mmc); - - /* link regulators to MMC adapters ... we "know" the - * regulators will be set up only *after* we return. - */ - zoom2_vmmc1_supply.dev = mmc[0].dev; - zoom2_vsim_supply.dev = mmc[0].dev; - zoom2_vmmc2_supply.dev = mmc[1].dev; - - return 0; + omap2_set_globals_343x(); + omap2_map_common_io(); } - -static int zoom2_batt_table[] = { -/* 0 C*/ -30800, 29500, 28300, 27100, -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -4040, 3910, 3790, 3670, 3550 -}; - -static struct twl4030_bci_platform_data zoom2_bci_data = { - .battery_tmp_tbl = zoom2_batt_table, - .tblsize = ARRAY_SIZE(zoom2_batt_table), +static struct omap_board_config_kernel zoom_config[] __initdata = { }; - -static struct twl4030_usb_data zoom2_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static void __init omap_zoom2_init_irq(void) +static void __init omap_zoom_init_irq(void) { - omap_board_config = zoom2_config; - omap_board_config_size = ARRAY_SIZE(zoom2_config); + omap_board_config = zoom_config; + omap_board_config_size = ARRAY_SIZE(zoom_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } -static struct twl4030_gpio_platform_data zoom2_gpio_data = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, - .setup = zoom2_twl_gpio_setup, -}; - -static struct twl4030_madc_platform_data zoom2_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_platform_data zoom2_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ - .bci = &zoom2_bci_data, - .madc = &zoom2_madc_data, - .usb = &zoom2_usb_data, - .gpio = &zoom2_gpio_data, - .keypad = &zoom2_kp_twl4030_data, - .vmmc1 = &zoom2_vmmc1, - .vmmc2 = &zoom2_vmmc2, - .vsim = &zoom2_vsim, - -}; - -static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &zoom2_twldata, - }, -}; - -static int __init omap_i2c_init(void) -{ - omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, - ARRAY_SIZE(zoom2_i2c_boardinfo)); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - extern int __init omap_zoom2_debugboard_init(void); +extern void __init zoom_peripherals_init(void); -static void __init omap_zoom2_init(void) +static void __init omap_zoom_init(void) { - omap_i2c_init(); - omap_serial_init(); + zoom_peripherals_init(); omap_zoom2_debugboard_init(); - usb_musb_init(); -} - -static void __init omap_zoom2_map_io(void) -{ - omap2_set_globals_343x(); - omap2_map_common_io(); } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, - .map_io = omap_zoom2_map_io, - .init_irq = omap_zoom2_init_irq, - .init_machine = omap_zoom2_init, + .map_io = omap_zoom_map_io, + .init_irq = omap_zoom_init_irq, + .init_machine = omap_zoom_init, .timer = &omap_timer, MACHINE_END