@@ -44,6 +44,8 @@
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "mmc-twl4030.h"
+#include "board-omap35x-pmic.h"
+
#define CONFIG_DISABLE_HFCLK 1
#define SDP3430_TS_GPIO_IRQ_SDPV1 3
@@ -157,15 +159,10 @@ static struct platform_device sdp3430_lcd_device = {
.id = -1,
};
-static struct regulator_consumer_supply sdp3430_vdac_supply = {
- .supply = "vdac",
- .dev = &sdp3430_lcd_device.dev,
-};
-
-static struct regulator_consumer_supply sdp3430_vdvi_supply = {
- .supply = "vdvi",
- .dev = &sdp3430_lcd_device.dev,
-};
+/* Create a single supply for VDAC */
+REGULATOR_CONSUMER_SINGLE_SUPPLY(vdac, vdac, &sdp3430_lcd_device.dev);
+/* Create a single supply for VDAC */
+REGULATOR_CONSUMER_SINGLE_SUPPLY(vpll2, vdvi, &sdp3430_lcd_device.dev);
static struct platform_device *sdp3430_devices[] __initdata = {
&sdp3430_lcd_device,
@@ -221,17 +218,12 @@ static struct twl4030_hsmmc_info mmc[] = {
{} /* Terminator */
};
-static struct regulator_consumer_supply sdp3430_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply sdp3430_vsim_supply = {
- .supply = "vmmc_aux",
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc2_supply = {
- .supply = "vmmc",
-};
+/* Create default supply for VMMC1 */
+TWL_VMMC1_SUPPLY;
+/* Create default supply for VSIM */
+TWL_VSIM_SUPPLY;
+/* Create default supply for VMMC2 */
+TWL_VMMC2_SUPPLY;
static int sdp3430_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
@@ -246,9 +238,9 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
/* link regulators to MMC adapters ... we "know" the
* regulators will be set up only *after* we return.
*/
- sdp3430_vmmc1_supply.dev = mmc[0].dev;
- sdp3430_vsim_supply.dev = mmc[0].dev;
- sdp3430_vmmc2_supply.dev = mmc[1].dev;
+ vmmc1_consumers[0].dev = mmc[0].dev;
+ vsim_consumers[0].dev = mmc[0].dev;
+ vmmc2_consumers[0].dev = mmc[1].dev;
/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
gpio_request(gpio + 7, "sub_lcd_en_bkl");
@@ -282,133 +274,45 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = {
* Apply all the fixed voltages since most versions of U-Boot
* don't bother with that initialization.
*/
-
+/* VAUX1 doesn't supply to anyone */
+REGULATOR_CONSUMER_NO_SUPPLY(vaux1);
+/* VAUX2 doesn't supply to anyone */
+REGULATOR_CONSUMER_NO_SUPPLY(vaux2);
+/* VAUX3 doesn't supply to anyone */
+REGULATOR_CONSUMER_NO_SUPPLY(vaux3);
+/* VAUX4 doesn't supply to anyone */
+REGULATOR_CONSUMER_NO_SUPPLY(vaux4);
+
+/* Create regulator initialization data for various regulators */
/* VAUX1 for mainboard (irda and sub-lcd) */
-static struct regulator_init_data sdp3430_vaux1 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
+TWL_VAUX1_DATA;
/* VAUX2 for camera module */
-static struct regulator_init_data sdp3430_vaux2 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
+TWL_VAUX2_DATA;
/* VAUX3 for LCD board */
-static struct regulator_init_data sdp3430_vaux3 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
+TWL_VAUX3_DATA;
/* VAUX4 for OMAP VDD_CSI2 (camera) */
-static struct regulator_init_data sdp3430_vaux4 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
+TWL_VAUX4_DATA;
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data sdp3430_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &sdp3430_vmmc1_supply,
-};
+REGULATOR_INIT_DATA(vmmc1, VMMC1, 1850000, 3150000,
+ TWL_REGULATOR_MODES_DEFAULT,
+ TWL_REGULATOR_OPS_DEFAULT | REGULATOR_CHANGE_VOLTAGE,
+ false);
/* VMMC2 for MMC2 card */
-static struct regulator_init_data sdp3430_vmmc2 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 1850000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &sdp3430_vmmc2_supply,
-};
+TWL_VMMC2_DATA;
/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data sdp3430_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &sdp3430_vsim_supply,
-};
+REGULATOR_INIT_DATA(vsim, VSIM, 1800000, 3000000,
+ TWL_REGULATOR_MODES_DEFAULT,
+ TWL_REGULATOR_OPS_DEFAULT | REGULATOR_CHANGE_VOLTAGE,
+ false);
/* VDAC for DSS driving S-Video */
-static struct regulator_init_data sdp3430_vdac = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &sdp3430_vdac_supply,
-};
+TWL_VDAC_DATA;
/* VPLL2 for digital video outputs */
-static struct regulator_init_data sdp3430_vpll2 = {
- .constraints = {
- .name = "VDVI",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &sdp3430_vdvi_supply,
-};
+TWL_VPLL2_DATA;
static struct twl4030_platform_data sdp3430_twldata = {
.irq_base = TWL4030_IRQ_BASE,
@@ -421,15 +325,15 @@ static struct twl4030_platform_data sdp3430_twldata = {
.keypad = &sdp3430_kp_data,
.usb = &sdp3430_usb_data,
- .vaux1 = &sdp3430_vaux1,
- .vaux2 = &sdp3430_vaux2,
- .vaux3 = &sdp3430_vaux3,
- .vaux4 = &sdp3430_vaux4,
- .vmmc1 = &sdp3430_vmmc1,
- .vmmc2 = &sdp3430_vmmc2,
- .vsim = &sdp3430_vsim,
- .vdac = &sdp3430_vdac,
- .vpll2 = &sdp3430_vpll2,
+ .vaux1 = &vaux1_data[0],
+ .vaux2 = &vaux2_data[0],
+ .vaux3 = &vaux3_data[0],
+ .vaux4 = &vaux4_data[0],
+ .vmmc1 = &vmmc1_data[0],
+ .vmmc2 = &vmmc2_data[0],
+ .vsim = &vsim_data[0],
+ .vdac = &vdac_data[0],
+ .vpll2 = &vpll2_data[0],
};
static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = {
@@ -499,6 +403,8 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
static void __init omap_3430sdp_init(void)
{
omap3430_i2c_init();
+ regulator_has_full_constraints();
+
platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
if (omap_rev() > OMAP3430_REV_ES1_0)
ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2;