[PATCH/USB,10/16] usb: musb: clean up commit 'workaround Blackfin FIFO anomalies'

Commit Message

Felipe Balbi Jan. 19, 2010, 1:14 p.m. UTC

None

Patch

diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index ad26e65..bcee133 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -30,7 +30,6 @@  void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 	void __iomem *fifo = hw_ep->fifo;
 	void __iomem *epio = hw_ep->regs;
 	u8 epnum = hw_ep->epnum;
-	u16 dma_reg = 0;
 
 	prefetch((u8 *)src);
 
@@ -42,15 +41,17 @@  void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 	dump_fifo_data(src, len);
 
 	if (!ANOMALY_05000380 && epnum != 0) {
-		flush_dcache_range((unsigned int)src,
-			(unsigned int)(src + len));
+		u16 dma_reg;
+
+		flush_dcache_range((unsigned long)src,
+			(unsigned long)(src + len));
 
 		/* Setup DMA address register */
-		dma_reg = (u16) ((u32) src & 0xFFFF);
+		dma_reg = (u32)src;
 		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
 		SSYNC();
 
-		dma_reg = (u16) (((u32) src >> 16) & 0xFFFF);
+		dma_reg = (u32)src >> 16;
 		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
 		SSYNC();
 
@@ -79,12 +80,9 @@  void musb_write_fifo(struct musb_hw_ep *hw_ep, u16 len, const u8 *src)
 		SSYNC();
 
 		if (unlikely((unsigned long)src & 0x01))
-			outsw_8((unsigned long)fifo, src,
-				len & 0x01 ? (len >> 1) + 1 : len >> 1);
+			outsw_8((unsigned long)fifo, src, (len + 1) >> 1);
 		else
-			outsw((unsigned long)fifo, src,
-				len & 0x01 ? (len >> 1) + 1 : len >> 1);
-
+			outsw((unsigned long)fifo, src, (len + 1) >> 1);
 	}
 }
 /*
@@ -94,19 +92,19 @@  void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 {
 	void __iomem *fifo = hw_ep->fifo;
 	u8 epnum = hw_ep->epnum;
-	u16 dma_reg = 0;
 
 	if (ANOMALY_05000467 && epnum != 0) {
+		u16 dma_reg;
 
-		invalidate_dcache_range((unsigned int)dst,
-			(unsigned int)(dst + len));
+		invalidate_dcache_range((unsigned long)dst,
+			(unsigned long)(dst + len));
 
 		/* Setup DMA address register */
-		dma_reg = (u16) ((u32) dst & 0xFFFF);
+		dma_reg = (u32)dst;
 		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_LOW), dma_reg);
 		SSYNC();
 
-		dma_reg = (u16) (((u32) dst >> 16) & 0xFFFF);
+		dma_reg = (u32)dst >> 16;
 		bfin_write16(USB_DMA_REG(epnum, USB_DMAx_ADDR_HIGH), dma_reg);
 		SSYNC();