@@ -137,7 +137,11 @@
#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
#define OMAP4_GPIO_IRQWAKEN0 0x0044
#define OMAP4_GPIO_IRQWAKEN1 0x0048
-#define OMAP4_GPIO_SYSSTATUS 0x0104
+#define OMAP4_GPIO_SYSSTATUS 0x0114
+#define OMAP4_GPIO_IRQENABLE1 0x011c
+#define OMAP4_GPIO_WAKE_EN 0x0120
+#define OMAP4_GPIO_IRQSTATUS2 0x0128
+#define OMAP4_GPIO_IRQENABLE2 0x012c
#define OMAP4_GPIO_CTRL 0x0130
#define OMAP4_GPIO_OE 0x0134
#define OMAP4_GPIO_DATAIN 0x0138
@@ -148,6 +152,10 @@
#define OMAP4_GPIO_FALLINGDETECT 0x014c
#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
+#define OMAP4_GPIO_SETIRQENABLE1 0x0164
+#define OMAP4_GPIO_CLEARWKUENA 0x0180
+#define OMAP4_GPIO_SETWKUENA 0x0184
#define OMAP4_GPIO_CLEARDATAOUT 0x0190
#define OMAP4_GPIO_SETDATAOUT 0x0194
/*
@@ -591,12 +599,16 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
reg += OMAP7XX_GPIO_DATA_OUTPUT;
break;
#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
case METHOD_GPIO_24XX:
- case METHOD_GPIO_44XX:
reg += OMAP24XX_GPIO_DATAOUT;
break;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ case METHOD_GPIO_44XX:
+ reg += OMAP4_GPIO_DATAOUT;
+ break;
+#endif
default:
return -EINVAL;
}
@@ -1200,11 +1215,17 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
#endif
if (!cpu_class_is_omap1()) {
if (!bank->mod_usage) {
+ void __iomem *reg = bank->base;
u32 ctrl;
- ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
- ctrl &= 0xFFFFFFFE;
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ reg += OMAP24XX_GPIO_CTRL;
+ else if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_CTRL;
+ ctrl = __raw_readl(reg);
/* Module is enabled, clocks are not gated */
- __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+ ctrl &= 0xFFFFFFFE;
+ __raw_writel(ctrl, reg);
}
bank->mod_usage |= 1 << offset;
}
@@ -1226,22 +1247,34 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
__raw_writel(1 << offset, reg);
}
#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
- if ((bank->method == METHOD_GPIO_24XX) ||
- (bank->method == METHOD_GPIO_44XX)) {
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+ if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
__raw_writel(1 << offset, reg);
}
#endif
+#ifdef CONFIG_ARCH_OMAP4
+ if (bank->method == METHOD_GPIO_44XX) {
+ /* Disable wake-up during idle for dynamic tick */
+ void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
+ __raw_writel(1 << offset, reg);
+ }
+#endif
if (!cpu_class_is_omap1()) {
bank->mod_usage &= ~(1 << offset);
if (!bank->mod_usage) {
+ void __iomem *reg = bank->base;
u32 ctrl;
- ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+
+ if (cpu_is_omap24xx() || cpu_is_omap34xx())
+ reg += OMAP24XX_GPIO_CTRL;
+ else if (cpu_is_omap44xx())
+ reg += OMAP4_GPIO_CTRL;
+ ctrl = __raw_readl(reg);
/* Module is disabled, clocks are gated */
ctrl |= 1;
- __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+ __raw_writel(ctrl, reg);
}
}
_reset_gpio(bank, bank->chip.base + offset);
@@ -1570,9 +1603,14 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
reg += OMAP7XX_GPIO_DIR_CONTROL;
break;
case METHOD_GPIO_24XX:
- case METHOD_GPIO_44XX:
reg += OMAP24XX_GPIO_OE;
break;
+ case METHOD_GPIO_44XX:
+ reg += OMAP4_GPIO_OE;
+ break;
+ default:
+ WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
+ return -EINVAL;
}
return __raw_readl(reg) & mask;
}