[v4,3/3] omap3 nand: fix issue in board file to detect nand

Message ID	1274966647-32500-4-git-send-email-s-ghorai@ti.com (mailing list archive)
State	Superseded, archived
Delegated to:	Tony Lindgren
Headers	show Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter.kernel.org (8.14.3/8.14.3) with ESMTP id o4RDOGwH027637 for <patchwork-omap@patchwork.kernel.org>; Thu, 27 May 2010 13:24:16 GMT From: Sukumar Ghorai <s-ghorai@ti.com> To: linux-omap@vger.kernel.org Cc: Sukumar Ghorai <s-ghorai@ti.com> Subject: [PATCH v4 3/3] omap3 nand: fix issue in board file to detect nand Date: Thu, 27 May 2010 18:54:07 +0530 Message-Id: <1274966647-32500-4-git-send-email-s-ghorai@ti.com> In-Reply-To: <1274966647-32500-3-git-send-email-s-ghorai@ti.com> References: <Sukumar Ghorai <s-ghorai@ti.com> <1274966647-32500-1-git-send-email-s-ghorai@ti.com> <1274966647-32500-2-git-send-email-s-ghorai@ti.com> <1274966647-32500-3-git-send-email-s-ghorai@ti.com> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk

diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index e679a2c..0544294 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -61,8 +61,6 @@ #define SB_T35_SMSC911X_GPIO 65 #define NAND_BLOCK_SIZE SZ_128K -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS0_BASE_ADDR (OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE) #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> @@ -223,28 +221,12 @@ static struct omap_nand_platform_data cm_t35_nand_data = { .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions), .dma_channel = -1, /* disable DMA in OMAP NAND driver */ .cs = 0, - .gpmc_cs_baseaddr = (void __iomem *)GPMC_CS0_BASE_ADDR, - .gpmc_baseaddr = (void __iomem *)OMAP34XX_GPMC_VIRT, }; -static struct resource cm_t35_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cm_t35_nand_device = { - .name = "omap2-nand", - .id = -1, - .num_resources = 1, - .resource = &cm_t35_nand_resource, - .dev = { - .platform_data = &cm_t35_nand_data, - }, -}; - static void __init cm_t35_init_nand(void) { - if (platform_device_register(&cm_t35_nand_device) < 0) + if (gpmc_nand_init(&cm_t35_nand_data) < 0) pr_err("CM-T35: Unable to register NAND device\n"); } #else diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 77022b5..9a8135d --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -58,9 +58,6 @@ #include "mux.h" #include "hsmmc.h" -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - #define NAND_BLOCK_SIZE SZ_128K #define OMAP_DM9000_GPIO_IRQ 25 @@ -104,20 +101,6 @@ static struct omap_nand_platform_data devkit8000_nand_data = { .dma_channel = -1, /* disable DMA in OMAP NAND driver */ }; -static struct resource devkit8000_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device devkit8000_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &devkit8000_nand_data, - }, - .num_resources = 1, - .resource = &devkit8000_nand_resource, -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -581,8 +564,6 @@ static void __init devkit8000_flash_init(void) u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -604,13 +585,9 @@ static void __init devkit8000_flash_init(void) if (nandcs < GPMC_CS_NUM) { devkit8000_nand_data.cs = nandcs; - devkit8000_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - devkit8000_nand_data.gpmc_baseaddr = (void *) - (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&devkit8000_nand_device) < 0) + if (gpmc_nand_init(&devkit8000_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 69b154c..dc5a7e8 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -48,9 +48,6 @@ #include "mux.h" #include "hsmmc.h" -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - #define NAND_BLOCK_SIZE SZ_128K static struct mtd_partition omap3beagle_nand_partitions[] = { @@ -93,20 +90,6 @@ static struct omap_nand_platform_data omap3beagle_nand_data = { .dev_ready = NULL, }; -static struct resource omap3beagle_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device omap3beagle_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &omap3beagle_nand_data, - }, - .num_resources = 1, - .resource = &omap3beagle_nand_resource, -}; - /* DSS */ static int beagle_enable_dvi(struct omap_dss_device *dssdev) @@ -424,8 +407,6 @@ static void __init omap3beagle_flash_init(void) u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -447,12 +428,9 @@ static void __init omap3beagle_flash_init(void) if (nandcs < GPMC_CS_NUM) { omap3beagle_nand_data.cs = nandcs; - omap3beagle_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&omap3beagle_nand_device) < 0) + if (gpmc_nand_init(&omap3beagle_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 2504d41..e8ad30c --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -54,9 +54,6 @@ #include <asm/setup.h> -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - #define NAND_BLOCK_SIZE SZ_128K #define OMAP3_AC_GPIO 136 @@ -106,20 +103,6 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = { .dev_ready = NULL, }; -static struct resource omap3touchbook_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device omap3touchbook_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &omap3touchbook_nand_data, - }, - .num_resources = 1, - .resource = &omap3touchbook_nand_resource, -}; - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -459,8 +442,6 @@ static void __init omap3touchbook_flash_init(void) u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -482,13 +463,9 @@ static void __init omap3touchbook_flash_init(void) if (nandcs < GPMC_CS_NUM) { omap3touchbook_nand_data.cs = nandcs; - omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - omap3touchbook_nand_data.gpmc_baseaddr = - (void *) (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&omap3touchbook_nand_device) < 0) + if (gpmc_nand_init(&omap3touchbook_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 79ac414..cddc7ad --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -58,8 +58,6 @@ #define OVERO_GPIO_USBH_NRESET 183 #define NAND_BLOCK_SIZE SZ_128K -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 #define OVERO_SMSC911X_CS 5 #define OVERO_SMSC911X_GPIO 176 @@ -231,28 +229,11 @@ static struct omap_nand_platform_data overo_nand_data = { .dma_channel = -1, /* disable DMA in OMAP NAND driver */ }; -static struct resource overo_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device overo_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &overo_nand_data, - }, - .num_resources = 1, - .resource = &overo_nand_resource, -}; - - static void __init overo_flash_init(void) { u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -274,12 +255,9 @@ static void __init overo_flash_init(void) if (nandcs < GPMC_CS_NUM) { overo_nand_data.cs = nandcs; - overo_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&overo_nand_device) < 0) + if (gpmc_nand_init(&overo_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } }

[v4,3/3] omap3 nand: fix issue in board file to detect nand

Commit Message

Patch