From patchwork Fri Jul 9 07:25:08 2010 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sukumar Ghorai X-Patchwork-Id: 111002 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter.kernel.org (8.14.4/8.14.3) with ESMTP id o697PJ01022952 for ; Fri, 9 Jul 2010 07:25:21 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752716Ab0GIHZT (ORCPT ); Fri, 9 Jul 2010 03:25:19 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:60000 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752857Ab0GIHZR (ORCPT ); Fri, 9 Jul 2010 03:25:17 -0400 Received: from dbdp31.itg.ti.com ([172.24.170.98]) by bear.ext.ti.com (8.13.7/8.13.7) with ESMTP id o697PCZ9007620 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 9 Jul 2010 02:25:14 -0500 Received: from localhost.localdomain (localhost [127.0.0.1]) by dbdp31.itg.ti.com (8.13.8/8.13.8) with ESMTP id o697P8VL004363; Fri, 9 Jul 2010 12:55:11 +0530 (IST) From: Sukumar Ghorai To: linux-omap@vger.kernel.org Cc: linux-mtd@lists.infradead.org, Sukumar Ghorai Subject: [PATCH v6 3/3] omap3 nand: fix issue in board file to detect nand Date: Fri, 9 Jul 2010 12:55:08 +0530 Message-Id: <1278660308-8689-4-git-send-email-s-ghorai@ti.com> X-Mailer: git-send-email 1.5.4.7 In-Reply-To: <1278660308-8689-3-git-send-email-s-ghorai@ti.com> References: <1278660308-8689-1-git-send-email-s-ghorai@ti.com> <1278660308-8689-2-git-send-email-s-ghorai@ti.com> <1278660308-8689-3-git-send-email-s-ghorai@ti.com> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.3 (demeter.kernel.org [140.211.167.41]); Fri, 09 Jul 2010 07:25:22 +0000 (UTC) Board file modified for not to provide gpmc phys_base address to nand driver. The gpmc_nand_init funciton is now used to detect the nand and required to adopt _prob function as in nand/omap2.c Signed-off-by: Sukumar Ghorai --- arch/arm/mach-omap2/board-cm-t35.c | 20 +------------------- arch/arm/mach-omap2/board-devkit8000.c | 25 +------------------------ arch/arm/mach-omap2/board-omap3beagle.c | 24 +----------------------- arch/arm/mach-omap2/board-omap3touchbook.c | 25 +------------------------ arch/arm/mach-omap2/board-overo.c | 24 +----------------------- arch/arm/mach-omap2/board-sdp-flash.c | 5 ----- 6 files changed, 5 insertions(+), 118 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 79d6b15..9aa2b89 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -61,8 +61,6 @@ #define SB_T35_SMSC911X_GPIO 65 #define NAND_BLOCK_SIZE SZ_128K -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS0_BASE_ADDR (OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE) #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include @@ -223,28 +221,12 @@ static struct omap_nand_platform_data cm_t35_nand_data = { .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions), .dma_channel = -1, /* disable DMA in OMAP NAND driver */ .cs = 0, - .gpmc_cs_baseaddr = (void __iomem *)GPMC_CS0_BASE_ADDR, - .gpmc_baseaddr = (void __iomem *)OMAP34XX_GPMC_VIRT, }; -static struct resource cm_t35_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cm_t35_nand_device = { - .name = "omap2-nand", - .id = -1, - .num_resources = 1, - .resource = &cm_t35_nand_resource, - .dev = { - .platform_data = &cm_t35_nand_data, - }, -}; - static void __init cm_t35_init_nand(void) { - if (platform_device_register(&cm_t35_nand_device) < 0) + if (gpmc_nand_init(&cm_t35_nand_data) < 0) pr_err("CM-T35: Unable to register NAND device\n"); } #else diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 4b7103a..a1d8764 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -59,9 +59,6 @@ #include "mux.h" #include "hsmmc.h" -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - #define NAND_BLOCK_SIZE SZ_128K #define OMAP_DM9000_GPIO_IRQ 25 @@ -105,20 +102,6 @@ static struct omap_nand_platform_data devkit8000_nand_data = { .dma_channel = -1, /* disable DMA in OMAP NAND driver */ }; -static struct resource devkit8000_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device devkit8000_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &devkit8000_nand_data, - }, - .num_resources = 1, - .resource = &devkit8000_nand_resource, -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -591,8 +574,6 @@ static void __init devkit8000_flash_init(void) u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -614,13 +595,9 @@ static void __init devkit8000_flash_init(void) if (nandcs < GPMC_CS_NUM) { devkit8000_nand_data.cs = nandcs; - devkit8000_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - devkit8000_nand_data.gpmc_baseaddr = (void *) - (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&devkit8000_nand_device) < 0) + if (gpmc_nand_init(&devkit8000_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 64aa557..66177cb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -48,9 +48,6 @@ #include "mux.h" #include "hsmmc.h" -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - #define NAND_BLOCK_SIZE SZ_128K static struct mtd_partition omap3beagle_nand_partitions[] = { @@ -93,20 +90,6 @@ static struct omap_nand_platform_data omap3beagle_nand_data = { .dev_ready = NULL, }; -static struct resource omap3beagle_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device omap3beagle_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &omap3beagle_nand_data, - }, - .num_resources = 1, - .resource = &omap3beagle_nand_resource, -}; - /* DSS */ static int beagle_enable_dvi(struct omap_dss_device *dssdev) @@ -424,8 +407,6 @@ static void __init omap3beagle_flash_init(void) u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -447,12 +428,9 @@ static void __init omap3beagle_flash_init(void) if (nandcs < GPMC_CS_NUM) { omap3beagle_nand_data.cs = nandcs; - omap3beagle_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - omap3beagle_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&omap3beagle_nand_device) < 0) + if (gpmc_nand_init(&omap3beagle_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 820eaf1..aaba96b 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -54,9 +54,6 @@ #include -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 - #define NAND_BLOCK_SIZE SZ_128K #define OMAP3_AC_GPIO 136 @@ -106,20 +103,6 @@ static struct omap_nand_platform_data omap3touchbook_nand_data = { .dev_ready = NULL, }; -static struct resource omap3touchbook_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device omap3touchbook_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &omap3touchbook_nand_data, - }, - .num_resources = 1, - .resource = &omap3touchbook_nand_resource, -}; - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -458,8 +441,6 @@ static void __init omap3touchbook_flash_init(void) u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -481,13 +462,9 @@ static void __init omap3touchbook_flash_init(void) if (nandcs < GPMC_CS_NUM) { omap3touchbook_nand_data.cs = nandcs; - omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - omap3touchbook_nand_data.gpmc_baseaddr = - (void *) (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&omap3touchbook_nand_device) < 0) + if (gpmc_nand_init(&omap3touchbook_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b6bc315..d3ecb10 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -58,8 +58,6 @@ #define OVERO_GPIO_USBH_NRESET 183 #define NAND_BLOCK_SIZE SZ_128K -#define GPMC_CS0_BASE 0x60 -#define GPMC_CS_SIZE 0x30 #define OVERO_SMSC911X_CS 5 #define OVERO_SMSC911X_GPIO 176 @@ -269,28 +267,11 @@ static struct omap_nand_platform_data overo_nand_data = { .dma_channel = -1, /* disable DMA in OMAP NAND driver */ }; -static struct resource overo_nand_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device overo_nand_device = { - .name = "omap2-nand", - .id = -1, - .dev = { - .platform_data = &overo_nand_data, - }, - .num_resources = 1, - .resource = &overo_nand_resource, -}; - - static void __init overo_flash_init(void) { u8 cs = 0; u8 nandcs = GPMC_CS_NUM + 1; - u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; - /* find out the chip-select on which NAND exists */ while (cs < GPMC_CS_NUM) { u32 ret = 0; @@ -312,12 +293,9 @@ static void __init overo_flash_init(void) if (nandcs < GPMC_CS_NUM) { overo_nand_data.cs = nandcs; - overo_nand_data.gpmc_cs_baseaddr = (void *) - (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); - overo_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (platform_device_register(&overo_nand_device) < 0) + if (gpmc_nand_init(&overo_nand_data) < 0) printk(KERN_ERR "Unable to register NAND device\n"); } } diff --git a/arch/arm/mach-omap2/board-sdp-flash.c b/arch/arm/mach-omap2/board-sdp-flash.c index 2d02632..2638c83 100644 --- a/arch/arm/mach-omap2/board-sdp-flash.c +++ b/arch/arm/mach-omap2/board-sdp-flash.c @@ -162,11 +162,6 @@ __init board_nand_init(struct flash_partitions sdp_nand_parts, u8 cs) sdp_nand_data.parts = sdp_nand_parts.parts; sdp_nand_data.nr_parts = sdp_nand_parts.nr_parts; - sdp_nand_data.gpmc_cs_baseaddr = (void *)(OMAP34XX_GPMC_VIRT + - GPMC_CS0_BASE + - cs * GPMC_CS_SIZE); - sdp_nand_data.gpmc_baseaddr = (void *) (OMAP34XX_GPMC_VIRT); - gpmc_nand_init(&sdp_nand_data); } #else