@@ -138,6 +138,7 @@ obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom3.o \
board-zoom-debugboard.o
obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \
board-zoom-peripherals.o \
+ board-flash.o \
hsmmc.o
obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \
hsmmc.o
@@ -21,6 +21,7 @@
#include <plat/usb.h>
#include <mach/board-zoom.h>
+#include <mach/board-flash.h>
#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
@@ -86,12 +87,131 @@ static struct omap_board_mux board_mux[] __initdata = {
#define board_mux NULL
#endif
+/*
+ * SDP3630 CS organization
+ * See also the Switch S8 settings in the comments.
+ */
+static char chip_sel_sdp[][GPMC_CS_NUM] = {
+ {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
+ {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
+ {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
+};
+
+static struct mtd_partition sdp_nor_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "Bootloader-NOR",
+ .offset = 0,
+ .size = SZ_256K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "Params-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "Kernel-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* file system */
+ {
+ .name = "Filesystem-NOR",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ }
+};
+
+static struct mtd_partition sdp_onenand_partitions[] = {
+ {
+ .name = "X-Loader-OneNAND",
+ .offset = 0,
+ .size = 4 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "U-Boot-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE /* force read-only */
+ },
+ {
+ .name = "U-Boot Environment-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * (64 * 2048),
+ },
+ {
+ .name = "Kernel-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 16 * (64 * 2048),
+ },
+ {
+ .name = "File System-OneNAND",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition sdp_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader-NAND",
+ .offset = 0,
+ .size = 4 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot-NAND",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 10 * (64 * 2048),
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "Boot Env-NAND",
+
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
+ .size = 6 * (64 * 2048),
+ },
+ {
+ .name = "Kernel-NAND",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 40 * (64 * 2048),
+ },
+ {
+ .name = "File System - NAND",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
+ },
+};
+
+static struct flash_partitions sdp_flash_partitions[] = {
+ {
+ .parts = sdp_nor_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
+ },
+ {
+ .parts = sdp_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
+ },
+ {
+ .parts = sdp_nand_partitions,
+ .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
+ },
+};
+
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_serial_init();
zoom_peripherals_init();
board_smc91x_init();
+ board_flash_init(sdp_flash_partitions, chip_sel_sdp);
enable_board_wakeup_source();
usb_ehci_init(&ehci_pdata);
}
add support for NAND, OneNAND, NOR on omap 3630-sdp board. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> --- arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-3630sdp.c | 120 +++++++++++++++++++++++++++++++++++ 2 files changed, 121 insertions(+), 0 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html