@@ -347,11 +347,22 @@ static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
}
}
-static void twl4030_phy_power(struct twl4030_usb *twl, int on)
+static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
{
+ u8 old_pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
u8 pwr;
- pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+ if (on)
+ pwr = old_pwr & ~PHY_PWR_PHYPWD;
+ else
+ pwr = old_pwr | PHY_PWR_PHYPWD;
+
+ if (pwr != old_pwr)
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+}
+
+static void twl4030_phy_power(struct twl4030_usb *twl, int on)
+{
if (on) {
regulator_enable(twl->usb3v1);
regulator_enable(twl->usb1v8);
@@ -365,15 +376,13 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on)
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
VUSB_DEDICATED2);
regulator_enable(twl->usb1v5);
- pwr &= ~PHY_PWR_PHYPWD;
- WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+ __twl4030_phy_power(twl, 1);
twl4030_usb_write(twl, PHY_CLK_CTRL,
twl4030_usb_read(twl, PHY_CLK_CTRL) |
(PHY_CLK_CTRL_CLOCKGATING_EN |
PHY_CLK_CTRL_CLK32K_EN));
} else {
- pwr |= PHY_PWR_PHYPWD;
- WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+ __twl4030_phy_power(twl, 0);
regulator_disable(twl->usb1v5);
regulator_disable(twl->usb1v8);
regulator_disable(twl->usb3v1);
@@ -387,19 +396,25 @@ static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off)
twl4030_phy_power(twl, 0);
twl->asleep = 1;
+ dev_dbg(twl->dev, "%s\n", __func__);
}
-static void twl4030_phy_resume(struct twl4030_usb *twl)
+static void __twl4030_phy_resume(struct twl4030_usb *twl)
{
- if (!twl->asleep)
- return;
-
twl4030_phy_power(twl, 1);
twl4030_i2c_access(twl, 1);
twl4030_usb_set_mode(twl, twl->usb_mode);
if (twl->usb_mode == T2_USB_MODE_ULPI)
twl4030_i2c_access(twl, 0);
+}
+
+static void twl4030_phy_resume(struct twl4030_usb *twl)
+{
+ if (!twl->asleep)
+ return;
+ __twl4030_phy_resume(twl);
twl->asleep = 0;
+ dev_dbg(twl->dev, "%s\n", __func__);
}
static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
@@ -502,6 +517,26 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
return IRQ_HANDLED;
}
+static void twl4030_usb_phy_init(struct twl4030_usb *twl)
+{
+ int status;
+
+ status = twl4030_usb_linkstat(twl);
+ if (status >= 0) {
+ if (status == USB_EVENT_NONE) {
+ __twl4030_phy_power(twl, 0);
+ twl->asleep = 1;
+ } else {
+ __twl4030_phy_resume(twl);
+ twl->asleep = 0;
+ }
+
+ blocking_notifier_call_chain(&twl->otg.notifier, status,
+ twl->otg.gadget);
+ }
+ sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+}
+
static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
{
struct twl4030_usb *twl = xceiv_to_twl(x);
@@ -550,7 +585,6 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
struct twl4030_usb_data *pdata = pdev->dev.platform_data;
struct twl4030_usb *twl;
int status, err;
- u8 pwr;
if (!pdata) {
dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -569,10 +603,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
twl->otg.set_peripheral = twl4030_set_peripheral;
twl->otg.set_suspend = twl4030_set_suspend;
twl->usb_mode = pdata->usb_mode;
-
- pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
-
- twl->asleep = (pwr & PHY_PWR_PHYPWD);
+ twl->asleep = 1;
/* init spinlock for workqueue */
spin_lock_init(&twl->lock);
@@ -610,15 +641,10 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev)
return status;
}
- /* The IRQ handler just handles changes from the previous states
- * of the ID and VBUS pins ... in probe() we must initialize that
- * previous state. The easy way: fake an IRQ.
- *
- * REVISIT: a real IRQ might have happened already, if PREEMPT is
- * enabled. Else the IRQ may not yet be configured or enabled,
- * because of scheduling delays.
+ /* Power down phy or make it work according to
+ * current link state.
*/
- twl4030_usb_irq(twl->irq, twl);
+ twl4030_usb_phy_init(twl);
dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
return 0;