@@ -20,6 +20,13 @@ config PANEL_SHARP_LQ043T1DG01
help
LCD Panel used in TI's OMAP3517 EVM boards
+config PANEL_NEC_NL8048HL11_01B
+ tristate "NEC NL8048HL11-01B Panel"
+ depends on OMAP2_DSS
+ help
+ This NEC NL8048HL11-01B panel is TFT LCD
+ used in the Zoom2/3/3630 sdp boards.
+
config PANEL_TAAL
tristate "Taal DSI Panel"
depends on OMAP2_DSS_DSI
@@ -1,6 +1,7 @@
obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
+obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
obj-$(CONFIG_PANEL_TOPPOLY_TDO35S) += panel-toppoly-tdo35s.o
new file mode 100644
@@ -0,0 +1,379 @@
+/*
+ * Support for NEC-nl8048hl11-01b panel driver
+ *
+ * Copyright (C) 2010 Texas Instruments Inc.
+ * Author: Erik Gilling <konkers@android.com>
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+
+#include <plat/display.h>
+
+#define LCD_XRES 800
+#define LCD_YRES 480
+/*
+ * NEC PIX Clock Ratings
+ * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
+ */
+#define LCD_PIXEL_CLOCK 23800
+
+struct nec_8048_data {
+ struct backlight_device *bl;
+};
+
+/*
+ * NEC NL8048HL11-01B Manual
+ * defines HFB, HSW, HBP, VFP, VSW, VBP as shown below
+ */
+
+static struct omap_video_timings nec_8048_panel_timings = {
+ /* 800 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
+ .x_res = LCD_XRES,
+ .y_res = LCD_YRES,
+ .pixel_clock = LCD_PIXEL_CLOCK,
+ .hfp = 6,
+ .hsw = 1,
+ .hbp = 4,
+ .vfp = 3,
+ .vsw = 1,
+ .vbp = 4,
+};
+
+static int nec_8048_bl_update_status(struct backlight_device *bl)
+{
+ struct omap_dss_device *dssdev = dev_get_drvdata(&bl->dev);
+ int level;
+
+ if (!dssdev->set_backlight)
+ return -EINVAL;
+
+ if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
+ bl->props.power == FB_BLANK_UNBLANK)
+ level = bl->props.brightness;
+ else
+ level = 0;
+
+ return dssdev->set_backlight(dssdev, level);
+}
+
+static int nec_8048_bl_get_brightness(struct backlight_device *bl)
+{
+ if (bl->props.fb_blank == FB_BLANK_UNBLANK &&
+ bl->props.power == FB_BLANK_UNBLANK)
+ return bl->props.brightness;
+
+ return 0;
+}
+
+static const struct backlight_ops nec_8048_bl_ops = {
+ .get_brightness = nec_8048_bl_get_brightness,
+ .update_status = nec_8048_bl_update_status,
+};
+
+static int nec_8048_panel_probe(struct omap_dss_device *dssdev)
+{
+ struct backlight_device *bl;
+ struct nec_8048_data *necd;
+ struct backlight_properties props;
+ int r;
+
+ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_RF |
+ OMAP_DSS_LCD_ONOFF;
+ dssdev->panel.timings = nec_8048_panel_timings;
+
+ necd = kzalloc(sizeof(*necd), GFP_KERNEL);
+ if (!necd)
+ return -ENOMEM;
+
+ dev_set_drvdata(&dssdev->dev, necd);
+
+ memset(&props, 0, sizeof(struct backlight_properties));
+ props.max_brightness = 255;
+
+ bl = backlight_device_register("nec-8048", &dssdev->dev, dssdev,
+ &nec_8048_bl_ops, &props);
+ if (IS_ERR(bl)) {
+ r = PTR_ERR(bl);
+ kfree(necd);
+ return r;
+ }
+ necd->bl = bl;
+
+ bl->props.fb_blank = FB_BLANK_UNBLANK;
+ bl->props.power = FB_BLANK_UNBLANK;
+ bl->props.max_brightness = dssdev->max_backlight_level;
+ bl->props.brightness = dssdev->max_backlight_level;
+
+ r = nec_8048_bl_update_status(bl);
+ if (r < 0)
+ dev_err(&dssdev->dev, "failed to set lcd brightness\n");
+
+ return 0;
+}
+
+static void nec_8048_panel_remove(struct omap_dss_device *dssdev)
+{
+ struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
+ struct backlight_device *bl = necd->bl;
+
+ bl->props.power = FB_BLANK_POWERDOWN;
+ nec_8048_bl_update_status(bl);
+ backlight_device_unregister(bl);
+
+ kfree(necd);
+}
+
+static int nec_8048_panel_enable(struct omap_dss_device *dssdev)
+{
+ int r = 0;
+ struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
+ struct backlight_device *bl = necd->bl;
+
+ if (dssdev->platform_enable) {
+ r = dssdev->platform_enable(dssdev);
+ if (r)
+ return r;
+ }
+
+ r = nec_8048_bl_update_status(bl);
+ if (r < 0)
+ dev_err(&dssdev->dev, "failed to set lcd brightness\n");
+
+ r = omapdss_dpi_display_enable(dssdev);
+
+ return r;
+}
+
+static void nec_8048_panel_disable(struct omap_dss_device *dssdev)
+{
+ struct nec_8048_data *necd = dev_get_drvdata(&dssdev->dev);
+ struct backlight_device *bl = necd->bl;
+
+ omapdss_dpi_display_disable(dssdev);
+
+ bl->props.brightness = 0;
+ nec_8048_bl_update_status(bl);
+
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+}
+
+static int nec_8048_panel_suspend(struct omap_dss_device *dssdev)
+{
+ nec_8048_panel_disable(dssdev);
+ return 0;
+}
+
+static int nec_8048_panel_resume(struct omap_dss_device *dssdev)
+{
+ return nec_8048_panel_enable(dssdev);
+}
+
+static int nec_8048_recommended_bpp(struct omap_dss_device *dssdev)
+{
+ return 16;
+}
+
+static struct omap_dss_driver nec_8048_driver = {
+ .probe = nec_8048_panel_probe,
+ .remove = nec_8048_panel_remove,
+ .enable = nec_8048_panel_enable,
+ .disable = nec_8048_panel_disable,
+ .suspend = nec_8048_panel_suspend,
+ .resume = nec_8048_panel_resume,
+ .get_recommended_bpp = nec_8048_recommended_bpp,
+
+ .driver = {
+ .name = "NEC_8048_panel",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int spi_send(struct spi_device *spi, unsigned char reg_addr,
+ unsigned char reg_data)
+{
+ int ret = 0;
+ unsigned int cmd = 0, data = 0;
+
+ cmd = 0x0000 | reg_addr; /* register address write */
+ data = 0x0100 | reg_data ; /* register data write */
+ data = (cmd << 16) | data;
+
+ ret = spi_write(spi, (unsigned char *)&data, 4);
+ if (ret)
+ pr_err("error in spi_write %x\n", data);
+
+ return ret;
+}
+
+
+static int init_nec_8048_wvga_lcd(struct spi_device *spi)
+{
+ /* Initialization Sequence */
+ /* spi_send(spi, REG, VAL) */
+ spi_send(spi, 3, 0x01);
+ spi_send(spi, 0, 0x00);
+ spi_send(spi, 1, 0x01); /* R1 = 0x01 (normal), 0x03 (reversed) */
+ spi_send(spi, 4, 0x00);
+ spi_send(spi, 5, 0x14);
+ spi_send(spi, 6, 0x24);
+ spi_send(spi, 16, 0xD7);
+ spi_send(spi, 17, 0x00);
+ spi_send(spi, 18, 0x00);
+ spi_send(spi, 19, 0x55);
+ spi_send(spi, 20, 0x01);
+ spi_send(spi, 21, 0x70);
+ spi_send(spi, 22, 0x1E);
+ spi_send(spi, 23, 0x25);
+ spi_send(spi, 24, 0x25);
+ spi_send(spi, 25, 0x02);
+ spi_send(spi, 26, 0x02);
+ spi_send(spi, 27, 0xA0);
+ spi_send(spi, 32, 0x2F);
+ spi_send(spi, 33, 0x0F);
+ spi_send(spi, 34, 0x0F);
+ spi_send(spi, 35, 0x0F);
+ spi_send(spi, 36, 0x0F);
+ spi_send(spi, 37, 0x0F);
+ spi_send(spi, 38, 0x0F);
+ spi_send(spi, 39, 0x00);
+ spi_send(spi, 40, 0x02);
+ spi_send(spi, 41, 0x02);
+ spi_send(spi, 42, 0x02);
+ spi_send(spi, 43, 0x0F);
+ spi_send(spi, 44, 0x0F);
+ spi_send(spi, 45, 0x0F);
+ spi_send(spi, 46, 0x0F);
+ spi_send(spi, 47, 0x0F);
+ spi_send(spi, 48, 0x0F);
+ spi_send(spi, 49, 0x0F);
+ spi_send(spi, 50, 0x00);
+ spi_send(spi, 51, 0x02);
+ spi_send(spi, 52, 0x02);
+ spi_send(spi, 53, 0x02);
+ spi_send(spi, 80, 0x0C);
+ spi_send(spi, 83, 0x42);
+ spi_send(spi, 84, 0x42);
+ spi_send(spi, 85, 0x41);
+ spi_send(spi, 86, 0x14);
+ spi_send(spi, 89, 0x88);
+ spi_send(spi, 90, 0x01);
+ spi_send(spi, 91, 0x00);
+ spi_send(spi, 92, 0x02);
+ spi_send(spi, 93, 0x0C);
+ spi_send(spi, 94, 0x1C);
+ spi_send(spi, 95, 0x27);
+ spi_send(spi, 98, 0x49);
+ spi_send(spi, 99, 0x27);
+ spi_send(spi, 102, 0x76);
+ spi_send(spi, 103, 0x27);
+ spi_send(spi, 112, 0x01);
+ spi_send(spi, 113, 0x0E);
+ spi_send(spi, 114, 0x02);
+ spi_send(spi, 115, 0x0C);
+ spi_send(spi, 118, 0x0C);
+ spi_send(spi, 121, 0x30); /* R121 = 0x30 (normal), 0x10 (reversed) */
+ spi_send(spi, 130, 0x00);
+ spi_send(spi, 131, 0x00);
+ spi_send(spi, 132, 0xFC);
+ spi_send(spi, 134, 0x00);
+ spi_send(spi, 136, 0x00);
+ spi_send(spi, 138, 0x00);
+ spi_send(spi, 139, 0x00);
+ spi_send(spi, 140, 0x00);
+ spi_send(spi, 141, 0xFC);
+ spi_send(spi, 143, 0x00);
+ spi_send(spi, 145, 0x00);
+ spi_send(spi, 147, 0x00);
+ spi_send(spi, 148, 0x00);
+ spi_send(spi, 149, 0x00);
+ spi_send(spi, 150, 0xFC);
+ spi_send(spi, 152, 0x00);
+ spi_send(spi, 154, 0x00);
+ spi_send(spi, 156, 0x00);
+ spi_send(spi, 157, 0x00);
+ udelay(20);
+ spi_send(spi, 2, 0x00);
+
+ return 0;
+}
+
+static int nec_8048_spi_probe(struct spi_device *spi)
+{
+ spi->mode = SPI_MODE_0;
+ spi->bits_per_word = 32;
+ spi_setup(spi);
+
+ init_nec_8048_wvga_lcd(spi);
+
+ return omap_dss_register_driver(&nec_8048_driver);
+}
+
+static int nec_8048_spi_remove(struct spi_device *spi)
+{
+ omap_dss_unregister_driver(&nec_8048_driver);
+
+ return 0;
+}
+
+static int nec_8048_spi_suspend(struct spi_device *spi, pm_message_t mesg)
+{
+ spi_send(spi, 2, 0x01);
+ mdelay(40);
+
+ return 0;
+}
+
+static int nec_8048_spi_resume(struct spi_device *spi)
+{
+ /* reinitialize the panel */
+ spi_setup(spi);
+ spi_send(spi, 2, 0x00);
+ init_nec_8048_wvga_lcd(spi);
+
+ return 0;
+}
+
+static struct spi_driver nec_8048_spi_driver = {
+ .probe = nec_8048_spi_probe,
+ .remove = __devexit_p(nec_8048_spi_remove),
+ .suspend = nec_8048_spi_suspend,
+ .resume = nec_8048_spi_resume,
+ .driver = {
+ .name = "nec_8048_spi",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init nec_8048_lcd_init(void)
+{
+ return spi_register_driver(&nec_8048_spi_driver);
+}
+
+static void __exit nec_8048_lcd_exit(void)
+{
+ return spi_unregister_driver(&nec_8048_spi_driver);
+}
+
+module_init(nec_8048_lcd_init);
+module_exit(nec_8048_lcd_exit);
+MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
+MODULE_DESCRIPTION("Nec Driver");
+MODULE_LICENSE("GPL");