@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/err.h>
+#include <linux/opp.h>
#include <plat/omap-pm.h>
#include <plat/omap_device.h>
@@ -20,6 +21,7 @@
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
+#include <plat/voltage.h>
#include "pm.h"
@@ -138,6 +140,67 @@ err:
return ret;
}
+/*
+ * This API is to be called during init to put the various voltage
+ * domains to the voltage as per the opp table. Typically we boot up
+ * at the nominal voltage. So this function finds out the rate of
+ * the clock associated with the voltage domain, finds out the correct
+ * opp entry and puts the voltage domain to the voltage specifies
+ * in the opp entry
+ */
+static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
+ struct device *dev)
+{
+ struct voltagedomain *voltdm;
+ struct clk *clk;
+ struct opp *opp;
+ unsigned long freq, bootup_volt;
+
+ if (!vdd_name || !clk_name || !dev) {
+ printk(KERN_ERR "%s: Invalid parameters!\n", __func__);
+ goto exit;
+ }
+
+ voltdm = omap_voltage_domain_lookup(vdd_name);
+ if (IS_ERR(voltdm)) {
+ printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n",
+ __func__, vdd_name);
+ goto exit;
+ }
+
+ clk = clk_get(NULL, clk_name);
+ if (IS_ERR(clk)) {
+ printk(KERN_ERR "%s: unable to get clk %s\n",
+ __func__, clk_name);
+ goto exit;
+ }
+
+ freq = clk->rate;
+ clk_put(clk);
+
+ opp = opp_find_freq_ceil(dev, &freq);
+ if (IS_ERR(opp)) {
+ printk(KERN_ERR "%s: unable to find boot up OPP for vdd_%s\n",
+ __func__, vdd_name);
+ goto exit;
+ }
+
+ bootup_volt = opp_get_voltage(opp);
+ if (!bootup_volt) {
+ printk(KERN_ERR "%s: unable to find voltage corresponding"
+ "to the bootup OPP for vdd_%s\n", __func__, vdd_name);
+ goto exit;
+ }
+
+ omap_voltage_scale_vdd(voltdm, bootup_volt);
+ return 0;
+
+exit:
+ printk(KERN_ERR "%s: Unable to put vdd_%s to its init voltage\n\n",
+ __func__, vdd_name);
+ return -EINVAL;
+}
+
static int __init omap2_common_pm_init(void)
{
omap2_init_processor_devices();
@@ -145,6 +208,11 @@ static int __init omap2_common_pm_init(void)
if (cpu_is_omap34xx() || cpu_is_omap44xx())
omap_init_opp_table();
+ if (cpu_is_omap34xx()) {
+ omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev);
+ omap2_set_init_voltage("core", "l3_ick", l3_dev);
+ }
+
omap_pm_if_init();
return 0;