@@ -110,8 +110,6 @@ config USB_OTG
bool
depends on USB && EXPERIMENTAL
depends on USB_SUSPEND
- default n
-
config USB_OTG_WHITELIST
bool "Rely on OTG Targeted Peripherals List"
@@ -139,4 +137,3 @@ config USB_OTG_BLACKLIST_HUB
external hubs. OTG hosts are allowed to reduce hardware
and software costs by not supporting external hubs. So
are "Embedded Hosts" that don't offer OTG support.
-
@@ -125,7 +125,6 @@ choice
config USB_GADGET_AT91
boolean "Atmel AT91 USB Device Port"
depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
- select USB_GADGET_SELECTED
help
Many Atmel AT91 processors (such as the AT91RM2000) have a
full speed USB Device Port with support for five configurable
@@ -139,6 +138,7 @@ config USB_AT91
tristate
depends on USB_GADGET_AT91
default USB_GADGET
+ select USB_GADGET_SELECTED
config USB_GADGET_ATMEL_USBA
boolean "Atmel USBA"
@@ -8,12 +8,12 @@ comment "Enable Host or Gadget support to see Inventra options"
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
+ tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
depends on (USB || USB_GADGET)
depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523))
select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
select TWL4030_USB if MACH_OMAP_3430SDP
select USB_OTG_UTILS
- tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
help
Say Y here if your system has a dual role high speed USB
controller based on the Mentor Graphics silicon IP. Then
@@ -93,8 +93,8 @@ choice
# use USB_MUSB_HDRC_HCD not USB_MUSB_HOST to #ifdef host side support;
# OTG needs both roles, not just USB_MUSB_HOST.
config USB_MUSB_HOST
- depends on USB
bool "USB Host"
+ depends on USB
help
Say Y here if your system supports the USB host role.
If it has a USB "A" (rectangular), "Mini-A" (uncommon),
@@ -104,8 +104,8 @@ config USB_MUSB_HOST
# use USB_GADGET_MUSB_HDRC not USB_MUSB_PERIPHERAL to #ifdef peripheral
# side support ... OTG needs both roles
config USB_MUSB_PERIPHERAL
- depends on USB_GADGET
bool "USB Peripheral (gadget stack)"
+ depends on USB_GADGET
select USB_GADGET_MUSB_HDRC
help
Say Y here if your system supports the USB peripheral role.
@@ -114,8 +114,8 @@ config USB_MUSB_PERIPHERAL
(With a "Mini-AB" connector, you should enable USB OTG.)
config USB_MUSB_OTG
- depends on USB && USB_GADGET && PM && EXPERIMENTAL
bool "Both host and peripheral: USB OTG (On The Go) Device"
+ depends on USB && USB_GADGET && PM && EXPERIMENTAL
select USB_GADGET_MUSB_HDRC
select USB_OTG
help
@@ -139,14 +139,6 @@ config USB_MUSB_OTG
endchoice
-# enable peripheral support (including with OTG)
-config USB_GADGET_MUSB_HDRC
- bool
- depends on USB_MUSB_HDRC && (USB_MUSB_PERIPHERAL || USB_MUSB_OTG)
-# default y
-# select USB_GADGET_DUALSPEED
-# select USB_GADGET_SELECTED
-
# enables host support (including with OTG)
config USB_MUSB_HDRC_HCD
bool
@@ -154,7 +146,6 @@ config USB_MUSB_HDRC_HCD
select USB_OTG if USB_GADGET_MUSB_HDRC
default y
-
config MUSB_PIO_ONLY
bool 'Disable DMA (always use PIO)'
depends on USB_MUSB_HDRC