diff mbox

[2/3] OMAP: use generic DPI panel driver in board files

Message ID 1289252700-3482-3-git-send-email-bryan.wu@canonical.com (mailing list archive)
State Superseded
Delegated to: Tomi Valkeinen
Headers show

Commit Message

Bryan Wu Nov. 8, 2010, 9:44 p.m. UTC
None
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 4e3742c..0561e45 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -38,6 +38,7 @@ 
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 
 #include <plat/gpmc-smc91x.h>
 
@@ -270,11 +271,14 @@  static struct omap_dss_device sdp3430_lcd_device = {
 	.platform_disable	= sdp3430_panel_disable_lcd,
 };
 
+static struct generic_dpi_panel_data dvi_panel = {
+	.name		= "generic",
+};
+
 static struct omap_dss_device sdp3430_dvi_device = {
 	.name			= "dvi",
-	.driver_name		= "generic_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &dvi_panel,
 	.platform_enable	= sdp3430_panel_enable_dvi,
 	.platform_disable	= sdp3430_panel_disable_dvi,
 };
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 0739950..875fab0 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -35,6 +35,7 @@ 
 #include <plat/common.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 
 #include "mux.h"
 #include "control.h"
@@ -303,11 +304,14 @@  static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
 	lcd_enabled = 0;
 }
 
+static struct generic_dpi_panel_data lcd_panel = {
+	.name		= "sharp_lq",
+};
+
 static struct omap_dss_device am3517_evm_lcd_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "lcd",
-	.driver_name		= "sharp_lq_panel",
-	.phy.dpi.data_lines 	= 16,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &lcd_panel,
 	.platform_enable	= am3517_evm_panel_enable_lcd,
 	.platform_disable	= am3517_evm_panel_disable_lcd,
 };
@@ -346,11 +350,14 @@  static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
 	dvi_enabled = 0;
 }
 
+static struct generic_dpi_panel_data dvi_panel = {
+	.name		= "generic",
+};
+
 static struct omap_dss_device am3517_evm_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "generic_panel",
-	.phy.dpi.data_lines	= 24,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &dvi_panel,
 	.platform_enable	= am3517_evm_panel_enable_dvi,
 	.platform_disable	= am3517_evm_panel_disable_dvi,
 };
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 63f764e..1b7748b 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -46,6 +46,7 @@ 
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 #include <plat/mcspi.h>
 
 #include <mach/hardware.h>
@@ -351,20 +352,26 @@  static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
 {
 }
 
+static struct generic_dpi_panel_data lcd_panel = {
+	.name		= "toppoly_tdo35s",
+};
+
 static struct omap_dss_device cm_t35_lcd_device = {
 	.name			= "lcd",
-	.driver_name		= "toppoly_tdo35s_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 18,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &lcd_panel,
 	.platform_enable	= cm_t35_panel_enable_lcd,
 	.platform_disable	= cm_t35_panel_disable_lcd,
 };
 
+static struct generic_dpi_panel_data dvi_panel = {
+	.name		= "generic",
+};
+
 static struct omap_dss_device cm_t35_dvi_device = {
 	.name			= "dvi",
-	.driver_name		= "generic_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &dvi_panel,
 	.platform_enable	= cm_t35_panel_enable_dvi,
 	.platform_disable	= cm_t35_panel_disable_dvi,
 };
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f437..cdea207 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -46,6 +46,7 @@ 
 #include <plat/nand.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>
@@ -149,21 +150,26 @@  static struct regulator_consumer_supply devkit8000_vmmc1_supply =
 static struct regulator_consumer_supply devkit8000_vio_supply =
 	REGULATOR_SUPPLY("vcc", "spi2.0");
 
+static struct generic_dpi_panel_data lcd_panel = {
+	.name		= "generic",
+};
+
 static struct omap_dss_device devkit8000_lcd_device = {
 	.name                   = "lcd",
-	.driver_name            = "generic_panel",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines     = 24,
-	.reset_gpio             = -EINVAL, /* will be replaced */
+	.driver_name            = "generic_dpi_panel",
+	.data			= &lcd_panel,
 	.platform_enable        = devkit8000_panel_enable_lcd,
 	.platform_disable       = devkit8000_panel_disable_lcd,
 };
+
+static struct generic_dpi_panel_data dvi_panel = {
+	.name		= "generic",
+};
+
 static struct omap_dss_device devkit8000_dvi_device = {
 	.name                   = "dvi",
-	.driver_name            = "generic_panel",
-	.type                   = OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines     = 24,
-	.reset_gpio             = -EINVAL, /* will be replaced */
+	.driver_name            = "generic_dpi_panel",
+	.data			= &dvi_panel,
 	.platform_enable        = devkit8000_panel_enable_dvi,
 	.platform_disable       = devkit8000_panel_disable_dvi,
 };
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5e035a5..9aa0860 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -30,6 +30,7 @@ 
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 #include <plat/onenand.h>
 
 #include "mux.h"
@@ -433,11 +434,14 @@  static void igep2_disable_dvi(struct omap_dss_device *dssdev)
 	gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
 }
 
+static struct generic_dpi_panel_data dvi_panel = {
+	.name		= "generic",
+};
+
 static struct omap_dss_device igep2_dvi_device = {
-	.type			= OMAP_DISPLAY_TYPE_DPI,
 	.name			= "dvi",
-	.driver_name		= "generic_panel",
-	.phy.dpi.data_lines	= 24,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &dvi_panel,
 	.platform_enable	= igep2_enable_dvi,
 	.platform_disable	= igep2_disable_dvi,
 };
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 14f4224..d74fd1a 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,6 +41,7 @@ 
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
 #include <plat/usb.h>
@@ -194,11 +195,14 @@  static void beagle_disable_dvi(struct omap_dss_device *dssdev)
 		gpio_set_value(dssdev->reset_gpio, 0);
 }
 
+static struct generic_dpi_panel_data dvi_panel = {
+	.name = "generic",
+};
+
 static struct omap_dss_device beagle_dvi_device = {
-	.type = OMAP_DISPLAY_TYPE_DPI,
 	.name = "dvi",
-	.driver_name = "generic_panel",
-	.phy.dpi.data_lines = 24,
+	.driver_name = "generic_dpi_panel",
+	.data = &dvi_panel,
 	.reset_gpio = 170,
 	.platform_enable = beagle_enable_dvi,
 	.platform_disable = beagle_disable_dvi,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b04365c..e3200d5 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -43,6 +43,7 @@ 
 #include <plat/common.h>
 #include <plat/mcspi.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -301,11 +302,14 @@  static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
 	dvi_enabled = 0;
 }
 
+static struct generic_dpi_panel_data dvi_panel = {
+	.name =		"generic",
+};
+
 static struct omap_dss_device omap3_evm_dvi_device = {
 	.name			= "dvi",
-	.driver_name		= "generic_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &dvi_panel,
 	.platform_enable	= omap3_evm_enable_dvi,
 	.platform_disable	= omap3_evm_disable_dvi,
 };
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index f252721..06a5ea9 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -40,6 +40,7 @@ 
 #include <plat/nand.h>
 #include <plat/usb.h>
 #include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
 
 #include <plat/mcspi.h>
 #include <linux/input/matrix_keypad.h>
@@ -160,11 +161,14 @@  static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
 	lcd_enabled = 0;
 }
 
+static struct generic_dpi_panel_data lcd_panel = {
+	.name		= "generic",
+};
+
 static struct omap_dss_device omap3_stalker_lcd_device = {
 	.name			= "lcd",
-	.driver_name		= "generic_panel",
-	.phy.dpi.data_lines	= 24,
-	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &lcd_panel,
 	.platform_enable	= omap3_stalker_enable_lcd,
 	.platform_disable	= omap3_stalker_disable_lcd,
 };
@@ -208,11 +212,14 @@  static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
 	dvi_enabled = 0;
 }
 
+static struct generic_dpi_panel_data dvi_panel = {
+	.name		= "generic",
+};
+
 static struct omap_dss_device omap3_stalker_dvi_device = {
 	.name			= "dvi",
-	.driver_name		= "generic_panel",
-	.type			= OMAP_DISPLAY_TYPE_DPI,
-	.phy.dpi.data_lines	= 24,
+	.driver_name		= "generic_dpi_panel",
+	.data			= &dvi_panel,
 	.platform_enable	= omap3_stalker_enable_dvi,
 	.platform_disable	= omap3_stalker_disable_dvi,
 };