OMAP: kill all section mismatch warning for omap2plus_defconfig

Commit Message

Bryan Wu Nov. 30, 2010, 2:42 p.m. UTC

None

Patch

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index b527f8d..9ab8bb1 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -135,7 +135,7 @@  static inline void board_smc91x_init(void)
 
 #endif
 
-static struct omap_board_config_kernel sdp2430_config[] = {
+static struct omap_board_config_kernel sdp2430_config[] __initdata = {
 	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 2c6db1a..5c432d8 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -270,7 +270,7 @@  static struct omap_lcd_config apollon_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_board_config_kernel apollon_config[] = {
+static struct omap_board_config_kernel apollon_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&apollon_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 63f764e..cd97159 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -600,8 +600,8 @@  static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
 	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
 
 	.phy_reset  = true,
-	.reset_gpio_port[0]  = -EINVAL,
-	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[0]  = OMAP_MAX_GPIO_LINES + 6,
+	.reset_gpio_port[1]  = OMAP_MAX_GPIO_LINES + 7,
 	.reset_gpio_port[2]  = -EINVAL
 };
 
@@ -630,12 +630,6 @@  static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 	cm_t35_vmmc1_supply.dev = mmc[0].dev;
 	cm_t35_vsim_supply.dev = mmc[0].dev;
 
-	/* setup USB with proper PHY reset GPIOs */
-	ehci_pdata.reset_gpio_port[0] = gpio + 6;
-	ehci_pdata.reset_gpio_port[1] = gpio + 7;
-
-	usb_ehci_init(&ehci_pdata);
-
 	return 0;
 }
 
@@ -805,6 +799,7 @@  static void __init cm_t35_init(void)
 	cm_t35_init_display();
 
 	usb_musb_init(&musb_board_data);
+	usb_ehci_init(&ehci_pdata);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 929993b..5549f2c 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -283,7 +283,7 @@  static struct omap_usb_config h4_usb_config __initdata = {
 	.hmc_mode	= 0x00,		/* 0:dev|otg 1:disable 2:disable */
 };
 
-static struct omap_board_config_kernel h4_config[] = {
+static struct omap_board_config_kernel h4_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&h4_lcd_config },
 };
 
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index 86c9b21..9b79188 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -196,7 +196,7 @@  struct wl12xx_platform_data omap_zoom_wlan_data __initdata = {
 	.board_ref_clock = 1,
 };
 
-static struct omap2_hsmmc_info mmc[] __initdata = {
+static struct omap2_hsmmc_info mmc[] = {
 	{
 		.name		= "external",
 		.mmc		= 1,
diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
index 35275ba..3aa46ff 100644
--- a/drivers/mfd/twl-core.c
+++ b/drivers/mfd/twl-core.c
@@ -969,7 +969,7 @@  static int twl_remove(struct i2c_client *client)
 }
 
 /* NOTE:  this driver only handles a single twl4030/tps659x0 chip */
-static int __init
+static int __devinit
 twl_probe(struct i2c_client *client, const struct i2c_device_id *id)
 {
 	int				status;