@@ -85,4 +85,10 @@ extern unsigned int save_secure_ram_context_sz;
extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap34xx_cpu_suspend_sz;
+#if defined(CONFIG_PM)
+extern void enable_omap3630_toggle_l2_on_restore(void);
+#else
+static inline void enable_omap3630_toggle_l2_on_restore(void) { }
+#endif
+
#endif
@@ -995,8 +995,11 @@ void omap_push_sram_idle(void)
static void __init pm_errata_configure(void)
{
- if (cpu_is_omap3630())
+ if (cpu_is_omap3630()) {
pm34xx_errata |= RTA_ERRATUM_i608;
+ /* Enable the l2 cache toggling in sleep logic */
+ enable_omap3630_toggle_l2_on_restore();
+ }
}
static int __init omap3_pm_init(void)
@@ -111,6 +111,19 @@ ENTRY(get_omap3630_restore_pointer_sz)
.word . - get_omap3630_restore_pointer
.text
+/*
+ * L2 cache needs to be toggled for stable OFF mode functionality on 3630.
+ * This function sets up a fflag that will allow for this toggling to take
+ * place on 3630. Hopefully some version in the future maynot need this
+ */
+ENTRY(enable_omap3630_toggle_l2_on_restore)
+ stmfd sp!, {lr} @ save registers on stack
+ /* Setup so that we will disable and enable l2 */
+ mov r1, #0x1
+ str r1, l2dis_3630
+ ldmfd sp!, {pc} @ restore regs and return
+
+ .text
/* Function call to get the restore pointer for for ES3 to resume from OFF */
ENTRY(get_es3_restore_pointer)
stmfd sp!, {lr} @ save registers on stack
@@ -283,6 +296,14 @@ restore:
moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
bne logic_l1_restore
+
+ ldr r0, l2dis_3630
+ cmp r0, #0x1 @ should we disable L2 on 3630?
+ bne skipl2dis
+ mrc p15, 0, r0, c1, c0, 1
+ bic r0, r0, #2 @ disable L2 cache
+ mcr p15, 0, r0, c1, c0, 1
+skipl2dis:
ldr r0, control_stat
ldr r1, [r0]
and r1, #0x700
@@ -343,6 +364,13 @@ smi: .word 0xE1600070 @ Call SMI monitor (smieq)
mov r12, #0x2
.word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
+ ldr r1, l2dis_3630
+ cmp r1, #0x1 @ Do we need to re-enable L2 on 3630?
+ bne skipl2reen
+ mrc p15, 0, r1, c1, c0, 1
+ orr r1, r1, #2 @ re-enable L2 cache
+ mcr p15, 0, r1, c1, c0, 1
+skipl2reen:
mov r1, #0
/* Invalidate all instruction caches to PoU
* and flush branch target cache */
@@ -678,6 +706,8 @@ control_mem_rta:
.word CONTROL_MEM_RTA_CTRL
kernel_flush:
.word v7_flush_dcache_all
+l2dis_3630:
+ .word 0
/* these 2 words need to be at the end !!! */
kick_counter:
.word 0