@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
#include <linux/i2c/twl.h>
#include <linux/mmc/host.h>
@@ -257,9 +258,8 @@ static inline void __init igep2_init_smsc911x(void) { }
static struct omap_board_config_kernel igep2_config[] __initdata = {
};
-static struct regulator_consumer_supply igep2_vmmc1_supply = {
- .supply = "vmmc",
-};
+static struct regulator_consumer_supply igep2_vmmc1_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep2_vmmc1 = {
@@ -276,6 +276,52 @@ static struct regulator_init_data igep2_vmmc1 = {
.consumer_supplies = &igep2_vmmc1_supply,
};
+static struct regulator_consumer_supply igep2_vio_supply =
+ REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1");
+
+static struct regulator_init_data igep2_vio = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = 1,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &igep2_vio_supply,
+};
+
+static struct regulator_consumer_supply igep2_vmmc2_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
+static struct regulator_init_data igep2_vmmc2 = {
+ .constraints = {
+ .valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .always_on = 1,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &igep2_vmmc2_supply,
+};
+
+static struct fixed_voltage_config igep2_vwlan = {
+ .supply_name = "vwlan",
+ .microvolts = 3300000,
+ .gpio = -EINVAL,
+ .enabled_at_boot = 1,
+ .init_data = &igep2_vmmc2,
+};
+
+static struct platform_device igep2_vwlan_device = {
+ .name = "reg-fixed-voltage",
+ .id = 0,
+ .dev = {
+ .platform_data = &igep2_vwlan,
+ },
+};
+
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
@@ -373,12 +419,6 @@ static int igep2_twl_gpio_setup(struct device *dev,
omap2_hsmmc_init(mmc);
/*
- * link regulators to MMC adapters ... we "know" the
- * regulators will be set up only *after* we return.
- */
- igep2_vmmc1_supply.dev = mmc[0].dev;
-
- /*
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
@@ -489,6 +529,7 @@ static void __init igep2_display_init(void)
static struct platform_device *igep2_devices[] __initdata = {
&igep2_dss_device,
+ &igep2_vwlan_device,
};
static void __init igep2_init_irq(void)
@@ -519,7 +560,7 @@ static struct twl4030_platform_data igep2_twldata = {
.gpio = &igep2_twl4030_gpio_pdata,
.vmmc1 = &igep2_vmmc1,
.vpll2 = &igep2_vpll2,
-
+ .vio = &igep2_vio,
};
static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = {