new file mode 100644
@@ -0,0 +1,92 @@
+/*
+ * Dynamic Memory Manager (DMM) driver support functions for
+ * TI DMM-TILER hardware block.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef DMM_H
+#define DMM_H
+
+#define DMM_TILER_OR__0 0x220
+#define DMM_TILER_OR__1 0x224
+#define DMM_PAT_VIEW__0 0x420
+#define DMM_PAT_VIEW__1 0x424
+#define DMM_PAT_VIEW_MAP__0 0x440
+#define DMM_PAT_VIEW_MAP_BASE 0x460
+#define DMM_PAT_IRQSTATUS_RAW 0x480
+#define DMM_PAT_IRQSTATUS 0x490
+#define DMM_PAT_STATUS__0 0x4C0
+#define DMM_PAT_DESCR__0 0x500
+#define DMM_PAT_AREA__0 0x504
+#define DMM_PAT_CTRL__0 0x508
+#define DMM_PAT_DATA__0 0x50C
+
+/*
+ * Physical Address Translator (PAT) refill programming mode
+ */
+enum pat_mode {
+ MANUAL,
+ AUTO
+};
+
+/*
+ * Area definition for DMM physical address translator
+ */
+struct pat_area {
+ s8 x0:8;
+ s8 y0:8;
+ s8 x1:8;
+ s8 y1:8;
+};
+
+/*
+ * DMM physical address translator control
+ */
+struct pat_ctrl {
+ s32 start:4;
+ s32 dir:4;
+ s32 lut_id:8;
+ s32 sync:12;
+ s32 ini:4;
+};
+
+/*
+ * Physical Address Translator (PAT) descriptor
+ */
+struct pat {
+ struct pat *next;
+ struct pat_area area;
+ struct pat_ctrl ctrl;
+ u32 data;
+};
+
+/*
+ * DMM device data
+ */
+struct dmm {
+ const char *oh_name;
+ void __iomem *base;
+ int irq;
+};
+
+/*
+ * Create and initialize the physical address translator
+ */
+struct dmm *dmm_pat_init(u32 id);
+
+/*
+ * Program the physical address translator
+ */
+int dmm_pat_refill(struct dmm *dmm, struct pat *desc, enum pat_mode mode);
+
+#endif
new file mode 100644
@@ -0,0 +1,187 @@
+/*
+ * DMM driver support functions for TI OMAP processors.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <mach/dmm.h>
+
+#define MASK(msb, lsb) (((1 << ((msb) + 1 - (lsb))) - 1) << (lsb))
+#define SET_FLD(reg, msb, lsb, val) \
+(((reg) & ~MASK((msb), (lsb))) | (((val) << (lsb)) & MASK((msb), (lsb))))
+#define MAX_RETRY_MS 1000
+
+static struct dmm *dmm;
+
+static int dmm_probe(struct platform_device *dev)
+{
+ if (dev)
+ dmm = dev->dev.platform_data;
+
+ if (dmm && dmm->base) {
+ writel(0x88888888, dmm->base + DMM_TILER_OR__0);
+ writel(0x88888888, dmm->base + DMM_TILER_OR__1);
+ return 0;
+ }
+ return -EFAULT;
+}
+
+static int dmm_remove(struct platform_device *dev)
+{
+ return 0;
+}
+
+static struct platform_driver dmm_driver = {
+ .probe = dmm_probe,
+ .remove = dmm_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "dmm",
+ },
+};
+
+int dmm_pat_refill(struct dmm *dmm, struct pat *pd, enum pat_mode mode)
+{
+ void __iomem *r;
+ u32 v, i;
+
+ if (!dmm || !dmm->base || !pd)
+ return -EFAULT;
+
+ /* Only manual refill supported */
+ if (mode != MANUAL)
+ return -EFAULT;
+
+ /* Check that the DMM_PAT_STATUS register has not reported an error */
+ r = dmm->base + DMM_PAT_STATUS__0;
+ v = readl(r);
+ if (WARN(v & 0xFC00, KERN_ERR "dmm_pat_refill() error.\n"))
+ return -EIO;
+
+ /* Set "next" register to NULL */
+ r = dmm->base + DMM_PAT_DESCR__0;
+ v = readl(r);
+ v = SET_FLD(v, 31, 4, (u32) NULL);
+ writel(v, r);
+
+ /* Set area to be refilled */
+ r = dmm->base + DMM_PAT_AREA__0;
+ v = readl(r);
+ v = SET_FLD(v, 30, 24, pd->area.y1);
+ v = SET_FLD(v, 23, 16, pd->area.x1);
+ v = SET_FLD(v, 14, 8, pd->area.y0);
+ v = SET_FLD(v, 7, 0, pd->area.x0);
+ writel(v, r);
+
+ /* First, clear the DMM_PAT_IRQSTATUS register */
+ writel(0xFFFFFFFF, dmm->base + DMM_PAT_IRQSTATUS);
+
+ i = 1000;
+ while (readl(dmm->base + DMM_PAT_IRQSTATUS_RAW) != 0) {
+ if (--i == 0)
+ return -EFAULT;
+ udelay(1);
+ }
+
+ /* Fill data register */
+ v = readl(dmm->base + DMM_PAT_DATA__0);
+
+ v = SET_FLD(v, 31, 4, pd->data >> 4);
+ writel(v, r);
+
+ /* Read back PAT_DATA__0 to see if write was successful */
+ i = 1000;
+ while (readl(r) != pd->data) {
+ if (--i == 0)
+ return -EFAULT;
+ udelay(1);
+ }
+
+ v = readl(dmm->base + DMM_PAT_CTRL__0);
+ v = SET_FLD(v, 31, 28, pd->ctrl.ini);
+ v = SET_FLD(v, 16, 16, pd->ctrl.sync);
+ v = SET_FLD(v, 9, 8, pd->ctrl.lut_id);
+ v = SET_FLD(v, 6, 4, pd->ctrl.dir);
+ v = SET_FLD(v, 0, 0, pd->ctrl.start);
+ writel(v, r);
+
+ /* Check if PAT_IRQSTATUS_RAW is set after the PAT has been refilled */
+ i = 1000;
+ while ((readl(dmm->base + DMM_PAT_IRQSTATUS_RAW) & 0x3) != 0x3) {
+ if (--i == 0)
+ return -EFAULT;
+ udelay(1);
+ }
+
+ /* Again, clear the DMM_PAT_IRQSTATUS register */
+ writel(0xFFFFFFFF, dmm->base + DMM_PAT_IRQSTATUS);
+
+ i = 1000;
+ while (readl(dmm->base + DMM_PAT_IRQSTATUS_RAW) != 0) {
+ if (--i == 0)
+ return -EFAULT;
+ udelay(1);
+ }
+
+ /* Again, set "next" register to NULL to clear any PAT STATUS errors */
+ v = readl(dmm->base + DMM_PAT_DESCR__0);
+ v = SET_FLD(v, 31, 4, (u32) NULL);
+ writel(v, r);
+
+ /*
+ * Now, check that the DMM_PAT_STATUS register
+ * has not reported an error before exiting.
+ */
+ v = readl(dmm->base + DMM_PAT_STATUS__0);
+ if (WARN(v & 0xFC00, KERN_ERR "dmm_pat_refill() error.\n"))
+ return -EIO;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dmm_pat_refill);
+
+struct dmm *dmm_pat_init(u32 id)
+{
+ if (dmm && dmm->base) {
+ writel(0x88888888, dmm->base + DMM_PAT_VIEW__0);
+ writel(0x88888888, dmm->base + DMM_PAT_VIEW__1);
+ writel(0x80808080, dmm->base + DMM_PAT_VIEW_MAP__0);
+ writel(0x80000000, dmm->base + DMM_PAT_VIEW_MAP_BASE);
+ }
+
+ return dmm;
+}
+EXPORT_SYMBOL_GPL(dmm_pat_init);
+
+static s32 __init dmm_init(void)
+{
+ return platform_driver_register(&dmm_driver);
+}
+
+static void __exit dmm_exit(void)
+{
+ platform_driver_unregister(&dmm_driver);
+}
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("David Sin <davidsin@ti.com>");
+MODULE_AUTHOR("Lajos Molnar <molnar@ti.com>");
+module_init(dmm_init);
+module_exit(dmm_exit);