different places, i.e. SRAM management code and idle sleep code.
The macros are now defined at a centralized place, for
easier maintenance.
Tested on N900 and Beagleboard with full RET and OFF modes,
using cpuidle and suspend.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
---
arch/arm/mach-omap2/sdrc.h | 1 -
arch/arm/mach-omap2/sleep34xx.S | 1 +
arch/arm/plat-omap/include/plat/sram.h | 11 +++++++++++
arch/arm/plat-omap/sram.c | 7 ++-----
4 files changed, 14 insertions(+), 6 deletions(-)
@@ -74,5 +74,4 @@ static inline u32 sms_read_reg(u16 reg)
*/
#define SDRC_MPURATE_LOOPS 96
-
#endif
@@ -26,6 +26,7 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
+#include <plat/sram.h>
#include <mach/io.h>
#include "cm.h"
@@ -11,6 +11,7 @@
#ifndef __ARCH_ARM_OMAP_SRAM_H
#define __ARCH_ARM_OMAP_SRAM_H
+#ifndef __ASSEMBLY__
extern void * omap_sram_push(void * start, unsigned long size);
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
@@ -74,4 +75,14 @@ extern void omap_push_sram_idle(void);
static inline void omap_push_sram_idle(void) {}
#endif /* CONFIG_PM */
+#endif /* __ASSEMBLY__ */
+
+/*
+ * OMAP2+: define the SRAM PA addresses.
+ * Used by the SRAM management code and the idle sleep code.
+ */
+#define OMAP2_SRAM_PA 0x40200000
+#define OMAP3_SRAM_PA 0x40200000
+#define OMAP4_SRAM_PA 0x40300000
+
#endif
@@ -41,15 +41,12 @@
#define OMAP1_SRAM_PA 0x20000000
#define OMAP1_SRAM_VA VMALLOC_END
-#define OMAP2_SRAM_PA 0x40200000
-#define OMAP2_SRAM_PUB_PA 0x4020f800
+#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
#define OMAP2_SRAM_VA 0xfe400000
#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_PA 0x40200000
#define OMAP3_SRAM_VA 0xfe400000
-#define OMAP3_SRAM_PUB_PA 0x40208000
+#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_PA 0x40300000
#define OMAP4_SRAM_VA 0xfe400000
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)