@@ -3466,6 +3466,9 @@ int __init omap3xxx_clk_init(void)
} else if (cpu_is_omap3630()) {
cpu_mask = (RATE_IN_34XX | RATE_IN_36XX);
cpu_clkflg = CK_36XX;
+ } else if (cpu_is_ti816x()) {
+ cpu_mask = RATE_IN_TI816X;
+ cpu_clkflg = CK_TI816X;
} else if (cpu_is_omap34xx()) {
if (omap_rev() == OMAP3430_REV_ES1_0) {
cpu_mask = RATE_IN_3430ES1;
@@ -3545,7 +3548,7 @@ int __init omap3xxx_clk_init(void)
/*
* Lock DPLL5 and put it in autoidle.
*/
- if (omap_rev() >= OMAP3430_REV_ES2_0)
+ if (!cpu_is_ti816x() && (omap_rev() >= OMAP3430_REV_ES2_0))
omap3_clk_lock_dpll5();
/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */
@@ -108,6 +108,30 @@ void __init omap3_map_io(void)
omap2_set_globals_3xxx();
omap34xx_map_common_io();
}
+
+/*
+ * Adjust TAP register base such that omap3_check_revision accesses the correct
+ * TI816X register for checking device ID (it adds 0x204 to tap base while
+ * TI816X DEVICE ID register is at offset 0x600 from control base).
+ */
+#define TI816X_TAP_BASE (TI816X_CTRL_BASE + \
+ TI816X_CONTROL_DEVICE_ID - 0x204)
+
+static struct omap_globals ti816x_globals = {
+ .class = OMAP343X_CLASS,
+ .tap = OMAP2_L4_IO_ADDRESS(TI816X_TAP_BASE),
+ .ctrl = TI816X_CTRL_BASE,
+ .prm = TI816X_PRCM_BASE,
+ .cm = TI816X_PRCM_BASE,
+ .uart1_phys = TI816X_UART1_BASE,
+ .uart2_phys = TI816X_UART2_BASE,
+ .uart3_phys = TI816X_UART3_BASE,
+};
+
+void __init omap2_set_globals_ti816x(void)
+{
+ __omap2_set_globals(&ti816x_globals);
+}
#endif
#if defined(CONFIG_ARCH_OMAP4)
@@ -52,6 +52,11 @@
#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00
#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60
+/* TI816X spefic control submodules */
+#define TI816X_CONTROL_OCPCONF 0x000
+#define TI816X_CONTROL_DEVBOOT 0x040
+#define TI816X_CONTROL_DEVCONF 0x600
+
/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10)
@@ -241,6 +246,18 @@
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
+/* TI816X CONTROL_DEVBOOT register offsets */
+#define TI816X_CONTROL_STATUS (TI816X_CONTROL_DEVBOOT + 0x000)
+#define TI816X_CONTROL_BOOTSTAT (TI816X_CONTROL_DEVBOOT + 0x004)
+
+/* TI816X CONTROL_DEVCONF register offsets */
+#define TI816X_CONTROL_DEVICE_ID (TI816X_CONTROL_DEVCONF + 0x000)
+#define TI816X_CONTROL_MAC_ID0_LO (TI816X_CONTROL_DEVCONF + 0x030)
+#define TI816X_CONTROL_MAC_ID0_HI (TI816X_CONTROL_DEVCONF + 0x034)
+#define TI816X_CONTROL_MAC_ID1_LO (TI816X_CONTROL_DEVCONF + 0x038)
+#define TI816X_CONTROL_MAC_ID1_HI (TI816X_CONTROL_DEVCONF + 0x03c)
+#define TI816X_CONTROL_PCIE_CFG (TI816X_CONTROL_DEVCONF + 0x040)
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
@@ -191,12 +191,19 @@ static void __init omap3_check_features(void)
if (!cpu_is_omap3505() && !cpu_is_omap3517())
omap3_features |= OMAP3_HAS_IO_WAKEUP;
+ omap3_features |= OMAP3_HAS_SDRC;
+
/*
* TODO: Get additional info (where applicable)
* e.g. Size of L2 cache.
*/
}
+static void __init ti816x_check_features(void)
+{
+ omap3_features = OMAP3_HAS_NEON;
+}
+
static void __init omap3_check_revision(void)
{
u32 cpuid, idcode;
@@ -287,6 +294,20 @@ static void __init omap3_check_revision(void)
omap_chip.oc |= CHIP_IS_OMAP3630ES1_2;
}
break;
+ case 0xb81e:
+ omap_chip.oc = CHIP_IS_TI816X;
+
+ switch (rev) {
+ case 0:
+ omap_revision = TI8168_REV_ES1_0;
+ break;
+ case 1:
+ omap_revision = TI8168_REV_ES1_1;
+ break;
+ default:
+ omap_revision = TI8168_REV_ES1_1;
+ }
+ break;
default:
/* Unknown default to latest silicon rev as default*/
omap_revision = OMAP3630_REV_ES1_2;
@@ -372,6 +393,8 @@ static void __init omap3_cpuinfo(void)
/* Already set in omap3_check_revision() */
strcpy(cpu_name, "AM3505");
}
+ } else if (cpu_is_ti816x()) {
+ strcpy(cpu_name, "TI816X");
} else if (omap3_has_iva() && omap3_has_sgx()) {
/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
strcpy(cpu_name, "OMAP3430/3530");
@@ -386,7 +409,7 @@ static void __init omap3_cpuinfo(void)
strcpy(cpu_name, "OMAP3503");
}
- if (cpu_is_omap3630()) {
+ if (cpu_is_omap3630() || cpu_is_ti816x()) {
switch (rev) {
case OMAP_REVBITS_00:
strcpy(cpu_rev, "1.0");
@@ -462,7 +485,13 @@ void __init omap2_check_revision(void)
omap24xx_check_revision();
} else if (cpu_is_omap34xx()) {
omap3_check_revision();
- omap3_check_features();
+
+ /* TI816X doesn't have feature register */
+ if (!cpu_is_ti816x())
+ omap3_check_features();
+ else
+ ti816x_check_features();
+
omap3_cpuinfo();
return;
} else if (cpu_is_omap44xx()) {
@@ -75,6 +75,14 @@ omap_irq_base:
bne 9998f
ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
cmp \irqnr, #0x0
+ bne 9998f
+
+ /*
+ * ti816x has additional IRQ pending register. Checking this
+ * register on omap2 & omap3 has no effect (read as 0).
+ */
+ ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
+ cmp \irqnr, #0x0
9998:
ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
@@ -404,7 +404,7 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
omap_hwmod_late_init();
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+ if (omap3_has_sdrc()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
}
@@ -109,7 +109,7 @@ static void omap_mask_irq(unsigned int irq)
{
int offset = irq & (~(IRQ_BITS_PER_REG - 1));
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() && !cpu_is_ti816x()) {
int spurious = 0;
/*
@@ -203,6 +203,9 @@ void __init omap_init_irq(void)
BUG_ON(!base);
+ if (cpu_is_ti816x())
+ bank->nr_irqs = 128;
+
/* Static mapping, never released */
bank->base_reg = ioremap(base, SZ_4K);
if (!bank->base_reg) {
@@ -486,7 +486,7 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
mod_timer(&uart->timer, jiffies + uart->timeout);
omap_uart_smart_idle_enable(uart, 0);
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() && !cpu_is_ti816x()) {
u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
u32 wk_mask = 0;
u32 padconf = 0;
@@ -759,13 +759,13 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
p->private_data = uart;
/*
- * omap44xx: Never read empty UART fifo
+ * omap44xx, ti816x: Never read empty UART fifo
* omap3xxx: Never read empty UART fifo on UARTs
* with IP rev >=0x52
*/
uart->regshift = p->regshift;
uart->membase = p->membase;
- if (cpu_is_omap44xx())
+ if (cpu_is_omap44xx() || cpu_is_ti816x())
uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
@@ -847,7 +847,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
}
/* Enable the MDR1 errata for OMAP3 */
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() && !cpu_is_ti816x())
uart->errata |= UART_ERRATA_i202_MDR1_ACCESS;
}