@@ -87,18 +87,29 @@ extern int pm_dbg_regset_init(int reg_set);
#define pm_dbg_regset_init(reg_set) do {} while (0);
#endif /* CONFIG_PM_DEBUG */
+/* 24xx */
extern void omap24xx_idle_loop_suspend(void);
+extern unsigned int omap24xx_idle_loop_suspend_sz;
extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
+extern unsigned int omap24xx_cpu_suspend_sz;
+
+/* 3xxx */
extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+
+/* omap3_do_wfi function pointer and size, for copy to SRAM */
+extern void omap3_do_wfi(void);
+extern unsigned int omap3_do_wfi_sz;
+/* ... and its pointer from SRAM after copy */
+extern void (*omap3_do_wfi_sram)(void);
+
+/* save_secure_ram_context function pointer and size, for copy to SRAM */
extern void save_secure_ram_context(u32 *addr);
-extern void omap3_save_scratchpad_contents(void);
-extern unsigned int omap24xx_idle_loop_suspend_sz;
extern unsigned int save_secure_ram_context_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
-extern unsigned int omap34xx_cpu_suspend_sz;
+
+extern void omap3_save_scratchpad_contents(void);
#define PM_RTA_ERRATUM_i608 (1 << 0)
#define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1)
@@ -82,9 +82,8 @@ struct power_state {
static LIST_HEAD(pwrst_list);
-static void (*_omap_sram_idle)(u32 *addr, int save_state);
-
static int (*_omap_save_secure_sram)(u32 *addr);
+void (*omap3_do_wfi_sram)(void);
static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
static struct powerdomain *core_pwrdm, *per_pwrdm;
@@ -355,9 +354,6 @@ void omap_sram_idle(void)
int core_prev_state, per_prev_state;
u32 sdrc_pwr = 0;
- if (!_omap_sram_idle)
- return;
-
pwrdm_clear_all_prev_pwrst(mpu_pwrdm);
pwrdm_clear_all_prev_pwrst(neon_pwrdm);
pwrdm_clear_all_prev_pwrst(core_pwrdm);
@@ -439,7 +435,7 @@ void omap_sram_idle(void)
* get saved. The restore path then reads from this
* location and restores them back.
*/
- _omap_sram_idle(omap3_arm_context, save_state);
+ omap34xx_cpu_suspend(omap3_arm_context, save_state);
cpu_init();
/* Restore normal SDRC POWER settings */
@@ -996,10 +992,17 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
return 0;
}
+/*
+ * Push functions to SRAM
+ *
+ * The minimum set of functions is pushed to SRAM for execution:
+ * - omap3_do_wfi for erratum i581 WA,
+ * - save_secure_ram_context for security extensions.
+ */
void omap_push_sram_idle(void)
{
- _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
- omap34xx_cpu_suspend_sz);
+ omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
+
if (omap_type() != OMAP2_DEVICE_TYPE_GP)
_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
save_secure_ram_context_sz);
@@ -163,8 +163,10 @@ ENTRY(save_secure_ram_context_sz)
*
*
* Notes:
- * - this code gets copied to internal SRAM at boot and after wake-up
- * from OFF mode. The execution pointer in SRAM is _omap_sram_idle.
+ * - only the minimum set of functions gets copied to internal SRAM at boot
+ * and after wake-up from OFF mode, cf. omap_push_sram_idle. The function
+ * pointers in SDRAM or SRAM are called depending on the desired low power
+ * target state.
* - when the OMAP wakes up it continues at different execution points
* depending on the low power mode (non-OFF vs OFF modes),
* cf. 'Resume path for xxx mode' comments.
@@ -181,9 +183,15 @@ ENTRY(omap34xx_cpu_suspend)
* 3 - Both L1 and L2 lost
*/
- /* Directly jump to WFI is the context save is not required */
- cmp r1, #0x0
- beq omap3_do_wfi
+ /*
+ * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi)
+ * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram)
+ */
+ ldr r4, omap3_do_wfi_sram_addr
+ ldr r5, [r4]
+ cmp r1, #0x0 @ If no context save required,
+ bxeq r5 @ jump to the WFI code in SRAM
+
/* Otherwise fall through to the save context code */
save_context_wfi:
@@ -282,7 +290,31 @@ clean_l2:
mov lr, pc
bx r1
-omap3_do_wfi:
+ b omap3_do_wfi
+
+/*
+ * Local variables
+ */
+omap3_do_wfi_sram_addr:
+ .word omap3_do_wfi_sram
+kernel_flush:
+ .word v7_flush_dcache_all
+
+/* ===================================
+ * == WFI instruction => Enter idle ==
+ * ===================================
+ */
+
+/*
+ * Do WFI instruction
+ * Includes the resume path for non-OFF modes
+ *
+ * This code gets copied to internal SRAM and is accessible
+ * from both SDRAM and SRAM:
+ * - executed from SRAM for non-off modes (omap3_do_wfi_sram),
+ * - executed from SDRAM for OFF mode (omap3_do_wfi).
+ */
+ENTRY(omap3_do_wfi)
ldr r4, sdrc_power @ read the SDRC_POWER register
ldr r5, [r4] @ read the contents of SDRC_POWER
orr r5, r5, #0x40 @ enable self refresh on idle req
@@ -315,15 +347,111 @@ omap3_do_wfi:
nop
nop
nop
- bl wait_sdrc_ok
+
+/*
+ * wait_sdrc_ok implements the erratum ID i581 WA:
+ * SDRC state restore before accessing the SDRAM
+ *
+ * Only used at return from non-OFF mode. For OFF
+ * mode the ROM code configures the SDRC and
+ * the DPLL before calling the restore code directly
+ * from SDRAM.
+ */
+
+/* Make sure SDRC accesses are ok */
+wait_sdrc_ok:
+
+/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
+ ldr r4, cm_idlest_ckgen
+wait_dpll3_lock:
+ ldr r5, [r4]
+ tst r5, #1
+ beq wait_dpll3_lock
+
+ ldr r4, cm_idlest1_core
+wait_sdrc_ready:
+ ldr r5, [r4]
+ tst r5, #0x2
+ bne wait_sdrc_ready
+ /* allow DLL powerdown upon hw idle req */
+ ldr r4, sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+
+is_dll_in_lock_mode:
+ /* Is dll in lock mode? */
+ ldr r4, sdrc_dlla_ctrl
+ ldr r5, [r4]
+ tst r5, #0x4
+ bne exit_nonoff_modes @ Return if locked
+
+ /* wait till dll locks */
+wait_dll_lock_timed:
+ ldr r4, wait_dll_lock_counter
+ add r4, r4, #1
+ str r4, wait_dll_lock_counter
+ ldr r4, sdrc_dlla_status
+ /* Wait 20uS for lock */
+ mov r6, #8
+wait_dll_lock:
+ subs r6, r6, #0x1
+ beq kick_dll
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x4
+ bne wait_dll_lock
+ b exit_nonoff_modes @ Return when locked
+
+ /* disable/reenable DLL if not locked */
+kick_dll:
+ ldr r4, sdrc_dlla_ctrl
+ ldr r5, [r4]
+ mov r6, r5
+ bic r6, #(1<<3) @ disable dll
+ str r6, [r4]
+ dsb
+ orr r6, r6, #(1<<3) @ enable dll
+ str r6, [r4]
+ dsb
+ ldr r4, kick_counter
+ add r4, r4, #1
+ str r4, kick_counter
+ b wait_dll_lock_timed
/*
* ===================================
* == Exit point from non-OFF modes ==
* ===================================
*/
+exit_nonoff_modes:
ldmfd sp!, {r0-r12, pc} @ restore regs and return
+/*
+ * Local variables
+ */
+sdrc_power:
+ .word SDRC_POWER_V
+cm_idlest1_core:
+ .word CM_IDLEST1_CORE_V
+cm_idlest_ckgen:
+ .word CM_IDLEST_CKGEN_V
+sdrc_dlla_status:
+ .word SDRC_DLLA_STATUS_V
+sdrc_dlla_ctrl:
+ .word SDRC_DLLA_CTRL_V
+ /*
+ * When exporting to userspace while the counters are in SRAM,
+ * these 2 words need to be at the end to facilitate retrival!
+ */
+kick_counter:
+ .word 0
+wait_dll_lock_counter:
+ .word 0
+
+ENTRY(omap3_do_wfi_sz)
+ .word . - omap3_do_wfi
+
/*
* ==============================
@@ -339,6 +467,10 @@ omap3_do_wfi:
* restore_es3: applies to 34xx >= ES3.0
* restore_3630: applies to 36xx
* restore: common code for 3xxx
+ *
+ * Note: when back from CORE and MPU OFF mode we are running
+ * from SDRAM, without MMU, without the caches and prediction.
+ * Also the SRAM content has been cleared.
*/
restore_es3:
ldr r5, pm_prepwstst_core_p
@@ -357,7 +489,8 @@ copy_to_sram:
bne copy_to_sram
ldr r1, sram_base
blx r1
- b restore
+
+ b restore @ Fall through to common code
restore_3630:
ldr r1, pm_prepwstst_core_p
@@ -600,12 +733,41 @@ usettbr0:
*/
ldmfd sp!, {r0-r12, pc} @ restore regs and return
+/*
+ * Local variables
+ */
+pm_prepwstst_core_p:
+ .word PM_PREPWSTST_CORE_P
+pm_pwstctrl_mpu:
+ .word PM_PWSTCTRL_MPU_P
+scratchpad_base:
+ .word SCRATCHPAD_BASE_P
+sram_base:
+ .word SRAM_BASE_P + 0x8000
+ttbrbit_mask:
+ .word 0xFFFFC000
+table_index_mask:
+ .word 0xFFF00000
+table_entry:
+ .word 0x00000C02
+cache_pred_disable_mask:
+ .word 0xFFFFE7FB
+control_stat:
+ .word CONTROL_STAT
+control_mem_rta:
+ .word CONTROL_MEM_RTA_CTRL
+l2dis_3630:
+ .word 0
+
/*
* Internal functions
*/
-/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
+/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0
+ *
+ * Copied and run from SRAM in order to reconfigure the SDRC parameters.
+ */
.text
ENTRY(es3_sdrc_fix)
ldr r4, sdrc_syscfg @ get config addr
@@ -634,6 +796,9 @@ ENTRY(es3_sdrc_fix)
str r5, [r4] @ kick off refreshes
bx lr
+/*
+ * Local variables
+ */
sdrc_syscfg:
.word SDRC_SYSCONFIG_P
sdrc_mr_0:
@@ -650,119 +815,3 @@ sdrc_manual_1:
.word SDRC_MANUAL_1_P
ENTRY(es3_sdrc_fix_sz)
.word . - es3_sdrc_fix
-
-/*
- * This function implements the erratum ID i581 WA:
- * SDRC state restore before accessing the SDRAM
- *
- * Only used at return from non-OFF mode. For OFF
- * mode the ROM code configures the SDRC and
- * the DPLL before calling the restore code directly
- * from DDR.
- */
-
-/* Make sure SDRC accesses are ok */
-wait_sdrc_ok:
-
-/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
- ldr r4, cm_idlest_ckgen
-wait_dpll3_lock:
- ldr r5, [r4]
- tst r5, #1
- beq wait_dpll3_lock
-
- ldr r4, cm_idlest1_core
-wait_sdrc_ready:
- ldr r5, [r4]
- tst r5, #0x2
- bne wait_sdrc_ready
- /* allow DLL powerdown upon hw idle req */
- ldr r4, sdrc_power
- ldr r5, [r4]
- bic r5, r5, #0x40
- str r5, [r4]
-
-is_dll_in_lock_mode:
- /* Is dll in lock mode? */
- ldr r4, sdrc_dlla_ctrl
- ldr r5, [r4]
- tst r5, #0x4
- bxne lr @ Return if locked
- /* wait till dll locks */
-wait_dll_lock_timed:
- ldr r4, wait_dll_lock_counter
- add r4, r4, #1
- str r4, wait_dll_lock_counter
- ldr r4, sdrc_dlla_status
- /* Wait 20uS for lock */
- mov r6, #8
-wait_dll_lock:
- subs r6, r6, #0x1
- beq kick_dll
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x4
- bne wait_dll_lock
- bx lr @ Return when locked
-
- /* disable/reenable DLL if not locked */
-kick_dll:
- ldr r4, sdrc_dlla_ctrl
- ldr r5, [r4]
- mov r6, r5
- bic r6, #(1<<3) @ disable dll
- str r6, [r4]
- dsb
- orr r6, r6, #(1<<3) @ enable dll
- str r6, [r4]
- dsb
- ldr r4, kick_counter
- add r4, r4, #1
- str r4, kick_counter
- b wait_dll_lock_timed
-
-cm_idlest1_core:
- .word CM_IDLEST1_CORE_V
-cm_idlest_ckgen:
- .word CM_IDLEST_CKGEN_V
-sdrc_dlla_status:
- .word SDRC_DLLA_STATUS_V
-sdrc_dlla_ctrl:
- .word SDRC_DLLA_CTRL_V
-pm_prepwstst_core_p:
- .word PM_PREPWSTST_CORE_P
-pm_pwstctrl_mpu:
- .word PM_PWSTCTRL_MPU_P
-scratchpad_base:
- .word SCRATCHPAD_BASE_P
-sram_base:
- .word SRAM_BASE_P + 0x8000
-sdrc_power:
- .word SDRC_POWER_V
-ttbrbit_mask:
- .word 0xFFFFC000
-table_index_mask:
- .word 0xFFF00000
-table_entry:
- .word 0x00000C02
-cache_pred_disable_mask:
- .word 0xFFFFE7FB
-control_stat:
- .word CONTROL_STAT
-control_mem_rta:
- .word CONTROL_MEM_RTA_CTRL
-kernel_flush:
- .word v7_flush_dcache_all
-l2dis_3630:
- .word 0
- /*
- * When exporting to userspace while the counters are in SRAM,
- * these 2 words need to be at the end to facilitate retrival!
- */
-kick_counter:
- .word 0
-wait_dll_lock_counter:
- .word 0
-
-ENTRY(omap34xx_cpu_suspend_sz)
- .word . - omap34xx_cpu_suspend