===================================================================
@@ -30,25 +30,10 @@
#include <mach/irqs.h>
#include <mach/am35xx.h>
#include <plat/usb.h>
+#include <plat/omap_device.h>
#if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X)
-static struct resource musb_resources[] = {
- [0] = { /* start and end set dynamically */
- .flags = IORESOURCE_MEM,
- },
- [1] = { /* general IRQ */
- .start = INT_243X_HS_USB_MC,
- .flags = IORESOURCE_IRQ,
- .name = "mc",
- },
- [2] = { /* DMA IRQ */
- .start = INT_243X_HS_USB_DMA,
- .flags = IORESOURCE_IRQ,
- .name = "dma",
- },
-};
-
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
.dyn_fifo = 1,
@@ -76,35 +61,23 @@ static struct musb_hdrc_platform_data mu
static u64 musb_dmamask = DMA_BIT_MASK(32);
-static struct platform_device musb_device = {
- .name = "musb-omap2430",
- .id = -1,
- .dev = {
- .dma_mask = &musb_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &musb_plat,
+static struct omap_device_pm_latency omap_musb_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
},
- .num_resources = ARRAY_SIZE(musb_resources),
- .resource = musb_resources,
};
void __init usb_musb_init(struct omap_musb_board_data *board_data)
{
- if (cpu_is_omap243x()) {
- musb_resources[0].start = OMAP243X_HS_BASE;
- } else if (cpu_is_omap3517() || cpu_is_omap3505()) {
- musb_device.name = "musb-am35x";
- musb_resources[0].start = AM35XX_IPSS_USBOTGSS_BASE;
- musb_resources[1].start = INT_35XX_USBOTG_IRQ;
- } else if (cpu_is_omap34xx()) {
- musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
- } else if (cpu_is_omap44xx()) {
- musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE;
- musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N;
- musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N;
- }
- musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
-
+ struct omap_hwmod *oh;
+ struct omap_device *od;
+ struct platform_device *pdev;
+ struct device *dev;
+ int bus_id = -1;
+ const char *oh_name, *name;
+ struct musb_hdrc_platform_data *pdata;
/*
* REVISIT: This line can be removed once all the platforms using
* musb_core.c have been converted to use use clkdev.
@@ -115,8 +88,33 @@ void __init usb_musb_init(struct omap_mu
musb_plat.mode = board_data->mode;
musb_plat.extvbus = board_data->extvbus;
- if (platform_device_register(&musb_device) < 0)
- printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
+ if (cpu_is_omap3517() || cpu_is_omap3505()) {
+ oh_name = "am35x_otg_hs";
+ name = "musb-am35x";
+ } else {
+ oh_name = "usb_otg_hs";
+ name = "musb-omap2430";
+ }
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return;
+ }
+
+ od = omap_device_build(name, bus_id, oh, &musb_plat,
+ sizeof(*pdata), omap_musb_latency,
+ ARRAY_SIZE(omap_musb_latency), false);
+ if (IS_ERR(od)) {
+ pr_err("Could not build omap_device for %s %s\n",
+ name, oh_name);
+ return;
+ }
+ pdev = &od->pdev;
+ dev = &pdev->dev;
+ get_device(dev);
+ dev->dma_mask = &musb_dmamask;
+ dev->coherent_dma_mask = musb_dmamask;
+ put_device(dev);
}
#else