From patchwork Thu Feb 24 19:26:53 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: kishore kadiyala X-Patchwork-Id: 588311 X-Patchwork-Delegate: tony@atomide.com Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p1OJJRBP005289 for ; Thu, 24 Feb 2011 19:19:30 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756314Ab1BXTTY (ORCPT ); Thu, 24 Feb 2011 14:19:24 -0500 Received: from devils.ext.ti.com ([198.47.26.153]:41851 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756249Ab1BXTTW (ORCPT ); Thu, 24 Feb 2011 14:19:22 -0500 Received: from dbdp31.itg.ti.com ([172.24.170.98]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id p1OJJEL1029091 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Thu, 24 Feb 2011 13:19:16 -0600 Received: from ucmsshproxy.india.ext.ti.com (localhost [127.0.0.1]) by dbdp31.itg.ti.com (8.13.8/8.13.8) with SMTP id p1OJJBAQ006730; Fri, 25 Feb 2011 00:49:11 +0530 (IST) Received: from localhost (unknown [10.24.244.160]) by ucmsshproxy.india.ext.ti.com (Postfix) with ESMTP id 4B464158007; Fri, 25 Feb 2011 00:49:08 +0530 (IST) From: Kishore Kadiyala To: linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org Cc: tony@atomide.com, cjb@laptop.org, madhu.cr@ti.com, khilman@deeprootsystems.com, paul@pwsan.com, b-cousson@ti.com, Kishore Kadiyala Subject: [PATCH v4 5/6] OMAP: adapt hsmmc to hwmod framework Date: Fri, 25 Feb 2011 00:56:53 +0530 Message-Id: <1298575614-9388-6-git-send-email-kishore.kadiyala@ti.com> X-Mailer: git-send-email 1.7.1 In-Reply-To: <1298575614-9388-1-git-send-email-kishore.kadiyala@ti.com> References: <1298575614-9388-1-git-send-email-kishore.kadiyala@ti.com> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Thu, 24 Feb 2011 19:19:31 +0000 (UTC) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 100bb42..31632ac 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -544,112 +544,6 @@ static inline void omap_init_aes(void) { } /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) - -#define MMCHS_SYSCONFIG 0x0010 -#define MMCHS_SYSCONFIG_SWRESET (1 << 1) -#define MMCHS_SYSSTATUS 0x0014 -#define MMCHS_SYSSTATUS_RESETDONE (1 << 0) - -static struct platform_device dummy_pdev = { - .dev = { - .bus = &platform_bus_type, - }, -}; - -/** - * omap_hsmmc_reset() - Full reset of each HS-MMC controller - * - * Ensure that each MMC controller is fully reset. Controllers - * left in an unknown state (by bootloader) may prevent retention - * or OFF-mode. This is especially important in cases where the - * MMC driver is not enabled, _or_ built as a module. - * - * In order for reset to work, interface, functional and debounce - * clocks must be enabled. The debounce clock comes from func_32k_clk - * and is not under SW control, so we only enable i- and f-clocks. - **/ -static void __init omap_hsmmc_reset(void) -{ - u32 i, nr_controllers; - struct clk *iclk, *fclk; - - if (cpu_is_omap242x()) - return; - - nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC : - (cpu_is_omap34xx() ? OMAP34XX_NR_MMC : OMAP24XX_NR_MMC); - - for (i = 0; i < nr_controllers; i++) { - u32 v, base = 0; - struct device *dev = &dummy_pdev.dev; - - switch (i) { - case 0: - base = OMAP2_MMC1_BASE; - break; - case 1: - base = OMAP2_MMC2_BASE; - break; - case 2: - base = OMAP3_MMC3_BASE; - break; - case 3: - if (!cpu_is_omap44xx()) - return; - base = OMAP4_MMC4_BASE; - break; - case 4: - if (!cpu_is_omap44xx()) - return; - base = OMAP4_MMC5_BASE; - break; - } - - if (cpu_is_omap44xx()) - base += OMAP4_MMC_REG_OFFSET; - - dummy_pdev.id = i; - dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i); - iclk = clk_get(dev, "ick"); - if (IS_ERR(iclk)) - goto err1; - if (clk_enable(iclk)) - goto err2; - - fclk = clk_get(dev, "fck"); - if (IS_ERR(fclk)) - goto err3; - if (clk_enable(fclk)) - goto err4; - - omap_writel(MMCHS_SYSCONFIG_SWRESET, base + MMCHS_SYSCONFIG); - v = omap_readl(base + MMCHS_SYSSTATUS); - while (!(omap_readl(base + MMCHS_SYSSTATUS) & - MMCHS_SYSSTATUS_RESETDONE)) - cpu_relax(); - - clk_disable(fclk); - clk_put(fclk); - clk_disable(iclk); - clk_put(iclk); - } - return; - -err4: - clk_put(fclk); -err3: - clk_disable(iclk); -err2: - clk_put(iclk); -err1: - printk(KERN_WARNING "%s: Unable to enable clocks for MMC%d, " - "cannot reset.\n", __func__, i); -} -#else -static inline void omap_hsmmc_reset(void) {} -#endif - #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static inline void omap242x_mmc_mux(struct omap_mmc_platform_data @@ -706,150 +600,6 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) #endif -#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) - -static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, - int controller_nr) -{ - if ((mmc_controller->slots[0].switch_pin > 0) && \ - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, - OMAP_PIN_INPUT_PULLUP); - if ((mmc_controller->slots[0].gpio_wp > 0) && \ - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, - OMAP_PIN_INPUT_PULLUP); - if (cpu_is_omap34xx()) { - if (controller_nr == 0) { - omap_mux_init_signal("sdmmc1_clk", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_cmd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat0", - OMAP_PIN_INPUT_PULLUP); - if (mmc_controller->slots[0].caps & - (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { - omap_mux_init_signal("sdmmc1_dat1", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat2", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat3", - OMAP_PIN_INPUT_PULLUP); - } - if (mmc_controller->slots[0].caps & - MMC_CAP_8_BIT_DATA) { - omap_mux_init_signal("sdmmc1_dat4", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat5", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat6", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc1_dat7", - OMAP_PIN_INPUT_PULLUP); - } - } - if (controller_nr == 1) { - /* MMC2 */ - omap_mux_init_signal("sdmmc2_clk", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_cmd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat0", - OMAP_PIN_INPUT_PULLUP); - - /* - * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed - * in the board-*.c files - */ - if (mmc_controller->slots[0].caps & - (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { - omap_mux_init_signal("sdmmc2_dat1", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat2", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat3", - OMAP_PIN_INPUT_PULLUP); - } - if (mmc_controller->slots[0].caps & - MMC_CAP_8_BIT_DATA) { - omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", - OMAP_PIN_INPUT_PULLUP); - } - } - - /* - * For MMC3 the pins need to be muxed in the board-*.c files - */ - } -} - -void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ - int i; - char *name; - - for (i = 0; i < nr_controllers; i++) { - unsigned long base, size; - unsigned int irq = 0; - - if (!mmc_data[i]) - continue; - - omap2_mmc_mux(mmc_data[i], i); - - switch (i) { - case 0: - base = OMAP2_MMC1_BASE; - irq = INT_24XX_MMC_IRQ; - break; - case 1: - base = OMAP2_MMC2_BASE; - irq = INT_24XX_MMC2_IRQ; - break; - case 2: - if (!cpu_is_omap44xx() && !cpu_is_omap34xx()) - return; - base = OMAP3_MMC3_BASE; - irq = INT_34XX_MMC3_IRQ; - break; - case 3: - if (!cpu_is_omap44xx()) - return; - base = OMAP4_MMC4_BASE; - irq = OMAP44XX_IRQ_MMC4; - break; - case 4: - if (!cpu_is_omap44xx()) - return; - base = OMAP4_MMC5_BASE; - irq = OMAP44XX_IRQ_MMC5; - break; - default: - continue; - } - - if (cpu_is_omap44xx()) { - if (i < 3) - irq += OMAP44XX_IRQ_GIC_START; - size = OMAP4_HSMMC_SIZE; - name = "mmci-omap-hs"; - } else { - size = OMAP3_HSMMC_SIZE; - name = "mmci-omap-hs"; - } - omap_mmc_add(name, i, base, size, irq, mmc_data[i]); - }; -} - -#endif - /*-------------------------------------------------------------------------*/ #if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE) @@ -919,7 +669,6 @@ static int __init omap2_init_devices(void) * please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_hsmmc_reset(); omap_init_audio(); omap_init_camera(); omap_init_mbox(); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 5496bc7..c370c75 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -16,7 +16,11 @@ #include #include #include +#include +#include +#include +#include "mux.h" #include "hsmmc.h" #include "control.h" @@ -28,10 +32,6 @@ static u16 control_mmc1; #define HSMMC_NAME_LEN 9 -static struct hsmmc_controller { - char name[HSMMC_NAME_LEN + 1]; -} hsmmc[OMAP34XX_NR_MMC]; - #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) static int hsmmc_get_context_loss(struct device *dev) @@ -204,179 +204,304 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, return 0; } -static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata; - -void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, + int controller_nr) { - struct omap2_hsmmc_info *c; - int nr_hsmmc = ARRAY_SIZE(hsmmc_data); - int i; - u32 reg; - - if (!cpu_is_omap44xx()) { - if (cpu_is_omap2430()) { - control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; - control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; - } else { - control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; - control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; - } - } else { - control_pbias_offset = - OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE; - control_mmc1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1; - reg = omap4_ctrl_pad_readl(control_mmc1); - reg |= (OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK | - OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK); - reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK | - OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK); - reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK| - OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK | - OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK); - omap4_ctrl_pad_writel(reg, control_mmc1); - } - - for (c = controllers; c->mmc; c++) { - struct hsmmc_controller *hc = hsmmc + c->mmc - 1; - struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; - - if (!c->mmc || c->mmc > nr_hsmmc) { - pr_debug("MMC%d: no such controller\n", c->mmc); - continue; + if ((mmc_controller->slots[0].switch_pin > 0) && \ + (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, + OMAP_PIN_INPUT_PULLUP); + if ((mmc_controller->slots[0].gpio_wp > 0) && \ + (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, + OMAP_PIN_INPUT_PULLUP); + if (cpu_is_omap34xx()) { + if (controller_nr == 0) { + omap_mux_init_signal("sdmmc1_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat0", + OMAP_PIN_INPUT_PULLUP); + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { + omap_mux_init_signal("sdmmc1_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat3", + OMAP_PIN_INPUT_PULLUP); + } + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { + omap_mux_init_signal("sdmmc1_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat7", + OMAP_PIN_INPUT_PULLUP); + } } - if (mmc) { - pr_debug("MMC%d: already configured\n", c->mmc); - continue; + if (controller_nr == 1) { + /* MMC2 */ + omap_mux_init_signal("sdmmc2_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat0", + OMAP_PIN_INPUT_PULLUP); + + /* + * For 8 wire configurations, Lines DAT4, 5, 6 and 7 + * need to be muxed in the board-*.c files + */ + if (mmc_controller->slots[0].caps & + (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { + omap_mux_init_signal("sdmmc2_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat3", + OMAP_PIN_INPUT_PULLUP); + } + if (mmc_controller->slots[0].caps & + MMC_CAP_8_BIT_DATA) { + omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", + OMAP_PIN_INPUT_PULLUP); + } } - mmc = kzalloc(sizeof(struct omap_mmc_platform_data), - GFP_KERNEL); - if (!mmc) { - pr_err("Cannot allocate memory for mmc device!\n"); - goto done; - } + /* + * For MMC3 the pins need to be muxed in the board-*.c files + */ + } +} - if (c->name) - strncpy(hc->name, c->name, HSMMC_NAME_LEN); - else - snprintf(hc->name, ARRAY_SIZE(hc->name), - "mmc%islot%i", c->mmc, 1); - mmc->slots[0].name = hc->name; - mmc->nr_slots = 1; - mmc->slots[0].caps = c->caps; - mmc->slots[0].internal_clock = !c->ext_clock; - mmc->dma_mask = 0xffffffff; - if (cpu_is_omap44xx()) - mmc->reg_offset = OMAP4_MMC_REG_OFFSET; - else - mmc->reg_offset = 0; +static struct omap_mmc_platform_data *mmc __initdata; - mmc->get_context_loss_count = hsmmc_get_context_loss; +static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c) +{ + char *hc_name; - mmc->slots[0].switch_pin = c->gpio_cd; - mmc->slots[0].gpio_wp = c->gpio_wp; + if (!c->mmc) { + pr_debug("MMC%d: no such controller\n", c->mmc); + return -ENXIO; + } - mmc->slots[0].remux = c->remux; - mmc->slots[0].init_card = c->init_card; + hc_name = kzalloc(sizeof(char) * (HSMMC_NAME_LEN + 1), GFP_KERNEL); + if (!hc_name) { + pr_err("Cannot allocate memory for controller slot name\n"); + kfree(hc_name); + return -ENOMEM; + } - if (c->cover_only) - mmc->slots[0].cover = 1; + if (c->name) + strncpy(hc_name, c->name, HSMMC_NAME_LEN); + else + snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", + c->mmc, 1); + mmc->slots[0].name = hc_name; + mmc->nr_slots = 1; + mmc->slots[0].caps = c->caps; + mmc->slots[0].internal_clock = !c->ext_clock; + mmc->dma_mask = 0xffffffff; + if (cpu_is_omap44xx()) + mmc->reg_offset = OMAP4_MMC_REG_OFFSET; + else + mmc->reg_offset = 0; - if (c->nonremovable) - mmc->slots[0].nonremovable = 1; + mmc->get_context_loss_count = hsmmc_get_context_loss; - if (c->power_saving) - mmc->slots[0].power_saving = 1; + mmc->slots[0].switch_pin = c->gpio_cd; + mmc->slots[0].gpio_wp = c->gpio_wp; - if (c->no_off) - mmc->slots[0].no_off = 1; + mmc->slots[0].remux = c->remux; + mmc->slots[0].init_card = c->init_card; - if (c->vcc_aux_disable_is_sleep) - mmc->slots[0].vcc_aux_disable_is_sleep = 1; + if (c->cover_only) + mmc->slots[0].cover = 1; - /* NOTE: MMC slots should have a Vcc regulator set up. - * This may be from a TWL4030-family chip, another - * controllable regulator, or a fixed supply. - * - * temporary HACK: ocr_mask instead of fixed supply - */ - mmc->slots[0].ocr_mask = c->ocr_mask; + if (c->nonremovable) + mmc->slots[0].nonremovable = 1; - if (cpu_is_omap3517() || cpu_is_omap3505()) - mmc->slots[0].set_power = nop_mmc_set_power; - else - mmc->slots[0].features |= HSMMC_HAS_PBIAS; + if (c->power_saving) + mmc->slots[0].power_saving = 1; - if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) - mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET; + if (c->no_off) + mmc->slots[0].no_off = 1; - switch (c->mmc) { - case 1: - if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { - /* on-chip level shifting via PBIAS0/PBIAS1 */ - if (cpu_is_omap44xx()) { - mmc->slots[0].before_set_reg = + if (c->vcc_aux_disable_is_sleep) + mmc->slots[0].vcc_aux_disable_is_sleep = 1; + + /* NOTE: MMC slots should have a Vcc regulator set up. + * This may be from a TWL4030-family chip, another + * controllable regulator, or a fixed supply. + * + * temporary HACK: ocr_mask instead of fixed supply + */ + mmc->slots[0].ocr_mask = c->ocr_mask; + + if (cpu_is_omap3517() || cpu_is_omap3505()) + mmc->slots[0].set_power = nop_mmc_set_power; + else + mmc->slots[0].features |= HSMMC_HAS_PBIAS; + + if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0)) + mmc->slots[0].features |= HSMMC_HAS_UPDATED_RESET; + + switch (c->mmc) { + case 1: + if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + /* on-chip level shifting via PBIAS0/PBIAS1 */ + if (cpu_is_omap44xx()) { + mmc->slots[0].before_set_reg = omap4_hsmmc1_before_set_reg; - mmc->slots[0].after_set_reg = + mmc->slots[0].after_set_reg = omap4_hsmmc1_after_set_reg; - } else { - mmc->slots[0].before_set_reg = + } else { + mmc->slots[0].before_set_reg = omap_hsmmc1_before_set_reg; - mmc->slots[0].after_set_reg = + mmc->slots[0].after_set_reg = omap_hsmmc1_after_set_reg; - } } + } - /* Omap3630 HSMMC1 supports only 4-bit */ - if (cpu_is_omap3630() && - (c->caps & MMC_CAP_8_BIT_DATA)) { - c->caps &= ~MMC_CAP_8_BIT_DATA; - c->caps |= MMC_CAP_4_BIT_DATA; - mmc->slots[0].caps = c->caps; - } - break; - case 2: - if (c->ext_clock) - c->transceiver = 1; - if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { - c->caps &= ~MMC_CAP_8_BIT_DATA; - c->caps |= MMC_CAP_4_BIT_DATA; - } - /* FALLTHROUGH */ - case 3: - if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { - /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; - mmc->slots[0].after_set_reg = NULL; - } - break; - case 4: - case 5: - mmc->slots[0].before_set_reg = NULL; + /* Omap3630 HSMMC1 supports only 4-bit */ + if (cpu_is_omap3630() && + (c->caps & MMC_CAP_8_BIT_DATA)) { + c->caps &= ~MMC_CAP_8_BIT_DATA; + c->caps |= MMC_CAP_4_BIT_DATA; + mmc->slots[0].caps = c->caps; + } + break; + case 2: + if (c->ext_clock) + c->transceiver = 1; + if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) { + c->caps &= ~MMC_CAP_8_BIT_DATA; + c->caps |= MMC_CAP_4_BIT_DATA; + } + /* FALLTHROUGH */ + case 3: + if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + /* off-chip level shifting, or none */ + mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; mmc->slots[0].after_set_reg = NULL; - break; - default: - pr_err("MMC%d configuration not supported!\n", c->mmc); - kfree(mmc); - continue; } - hsmmc_data[c->mmc - 1] = mmc; + break; + case 4: + case 5: + mmc->slots[0].before_set_reg = NULL; + mmc->slots[0].after_set_reg = NULL; + break; + default: + pr_err("MMC%d configuration not supported!\n", c->mmc); + return -ENODEV; } + return 0; +} - omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC); +static struct omap_device_pm_latency omap_hsmmc_latency[] = { + [0] = { + .deactivate_func = omap_device_idle_hwmods, + .activate_func = omap_device_enable_hwmods, + .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, + }, + /* + * XXX There should also be an entry here to power off/on the + * MMC regulators/PBIAS cells, etc. + */ +}; - /* pass the device nodes back to board setup code */ - for (c = controllers; c->mmc; c++) { - struct omap_mmc_platform_data *mmc = hsmmc_data[c->mmc - 1]; +static int omap_mmc_init(struct omap_hwmod *oh, void *hsmmcinfo) +{ + struct omap_device *od; + struct omap_device_pm_latency *ohl; + char *name; + int ohl_cnt = 0; + struct omap_mmc_dev_attr *mmc_dev_attr = oh->dev_attr; + struct omap2_hsmmc_info *c = (struct omap2_hsmmc_info *) hsmmcinfo; + int idx; + static int mmc_num; + + c += mmc_num; + if (!c->mmc) { + pr_err("omap_hsmmc_info is not updated in board file\n"); + return 0; + } + mmc = kzalloc(sizeof(struct omap_mmc_platform_data), + GFP_KERNEL); + if (!mmc) { + pr_err("Cannot allocate memory for mmc device!\n"); + kfree(mmc); + return -ENOMEM; + } - if (!c->mmc || c->mmc > nr_hsmmc) - continue; - c->dev = mmc->dev; + if (omap_hsmmc_pdata_init(c) < 0) { + pr_err("%s fails!\n", __func__); + return -ENXIO; } -done: - for (i = 0; i < nr_hsmmc; i++) - kfree(hsmmc_data[i]); + idx = c->mmc - 1 ; + name = "mmci-omap-hs"; + ohl = omap_hsmmc_latency; + ohl_cnt = ARRAY_SIZE(omap_hsmmc_latency); + omap_hsmmc_mux(mmc, idx); + + if (mmc_dev_attr != NULL) + mmc->controller_flags = mmc_dev_attr->flags; + + od = omap_device_build(name, idx, oh, mmc, + sizeof(struct omap_mmc_platform_data), ohl, ohl_cnt, false); + if (IS_ERR(od)) { + WARN(1, "Cant build omap_device for %s:%s.\n", + name, oh->name); + return PTR_ERR(od); + } + /* + * return device handle to board setup code + * required to populate for regulator framework structure + */ + c->dev = &od->pdev.dev; + kfree(mmc); + mmc_num++; + return 0; } +void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) +{ + u32 reg; + + if (!cpu_is_omap44xx()) { + if (cpu_is_omap2430()) { + control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE; + control_devconf1_offset = OMAP243X_CONTROL_DEVCONF1; + } else { + control_pbias_offset = OMAP343X_CONTROL_PBIAS_LITE; + control_devconf1_offset = OMAP343X_CONTROL_DEVCONF1; + } + } else { + control_pbias_offset = + OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE; + control_mmc1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1; + reg = omap4_ctrl_pad_readl(control_mmc1); + reg |= (OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK | + OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK); + reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK | + OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK); + reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK| + OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK | + OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK); + omap4_ctrl_pad_writel(reg, control_mmc1); + } + omap_hwmod_for_each_by_class("mmc", omap_mmc_init, controllers); +} #endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index a7afab0..f38fef9 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -24,22 +24,10 @@ #define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ #define OMAP24XX_NR_MMC 2 -#define OMAP34XX_NR_MMC 3 -#define OMAP44XX_NR_MMC 5 #define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE -#define OMAP3_HSMMC_SIZE 0x200 -#define OMAP4_HSMMC_SIZE 0x1000 #define OMAP2_MMC1_BASE 0x4809c000 -#define OMAP2_MMC2_BASE 0x480b4000 -#define OMAP3_MMC3_BASE 0x480ad000 -#define OMAP4_MMC4_BASE 0x480d1000 -#define OMAP4_MMC5_BASE 0x480d5000 + #define OMAP4_MMC_REG_OFFSET 0x100 -#define HSMMC5 (1 << 4) -#define HSMMC4 (1 << 3) -#define HSMMC3 (1 << 2) -#define HSMMC2 (1 << 1) -#define HSMMC1 (1 << 0) #define OMAP_MMC_MAX_SLOTS 2 @@ -169,8 +157,6 @@ extern void omap_mmc_notify_cover_event(struct device *dev, int slot, void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); int omap_mmc_add(const char *name, int id, unsigned long base, unsigned long size, unsigned int irq, struct omap_mmc_platform_data *data); @@ -182,10 +168,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) { } -static inline void omap2_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} static inline int omap_mmc_add(const char *name, int id, unsigned long base, unsigned long size, unsigned int irq, struct omap_mmc_platform_data *data) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 8c42573..d0bd2b4 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1571,7 +1571,7 @@ static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) break; } - if (host->id == OMAP_MMC1_DEVID) { + if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) { /* Only MMC1 can interface at 3V without some flavor * of external transceiver; but they all handle 1.8V. */ @@ -1663,7 +1663,7 @@ static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host) u32 hctl, capa, value; /* Only MMC1 supports 3.0V */ - if (host->id == OMAP_MMC1_DEVID) { + if (host->pdata->controller_flags & OMAP_HSMMC_SUPPORTS_DUAL_VOLT) { hctl = SDVS30; capa = VS30 | VS18; } else {