@@ -11,6 +11,9 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_MPU_TIMER) += time.o
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
+# CPUFREQ driver
+obj-$(CONFIG_CPU_FREQ) += omap1-cpufreq.o
+
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
similarity index 74%
copy from arch/arm/plat-omap/cpu-omap.c
copy to arch/arm/mach-omap1/omap1-cpufreq.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/plat-omap/cpu-omap.c
+ * OMAP1 cpufreq driver
*
* CPU frequency scaling for OMAP
*
@@ -27,31 +27,18 @@
#include <linux/io.h>
#include <linux/opp.h>
-#include <mach/hardware.h>
-#include <plat/clock.h>
#include <asm/system.h>
-#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)
+#include <plat/clock.h>
#include <plat/omap-pm.h>
-#include <plat/common.h>
-#endif
+
+#include <mach/hardware.h>
#define VERY_HI_RATE 900000000
static struct cpufreq_frequency_table *freq_table;
-
-#ifdef CONFIG_ARCH_OMAP1
-#define MPU_CLK "mpu"
-#elif defined(CONFIG_ARCH_OMAP3)
-#define MPU_CLK "arm_fck"
-#else
-#define MPU_CLK "virt_prcm_set"
-#endif
-
static struct clk *mpu_clk;
-/* TODO: Add support for SDRAM timing changes */
-
static int omap_verify_speed(struct cpufreq_policy *policy)
{
if (freq_table)
@@ -85,13 +72,7 @@ static int omap_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
-#ifdef CONFIG_ARCH_OMAP1
struct cpufreq_freqs freqs;
-#endif
-#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)
- unsigned long freq;
- struct device *mpu_dev = omap2_get_mpuss_device();
-#endif
int ret = 0;
/* Ensure desired rate is within allowed range. Some govenors
@@ -101,25 +82,22 @@ static int omap_target(struct cpufreq_policy *policy,
if (target_freq > policy->max)
target_freq = policy->max;
-#ifdef CONFIG_ARCH_OMAP1
freqs.old = omap_getspeed(0);
freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
freqs.cpu = 0;
if (freqs.old == freqs.new)
return ret;
+
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
#ifdef CONFIG_CPU_FREQ_DEBUG
- printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n",
- freqs.old, freqs.new);
+ pr_info("cpufreq-omap: transition: %u --> %u\n", freqs.old, freqs.new);
#endif
ret = clk_set_rate(mpu_clk, freqs.new * 1000);
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-#elif defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)
- freq = target_freq * 1000;
- if (opp_find_freq_ceil(mpu_dev, &freq))
- omap_pm_cpu_set_freq(freq);
-#endif
+ if (!ret)
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
return ret;
}
@@ -127,7 +105,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
- mpu_clk = clk_get(NULL, MPU_CLK);
+ mpu_clk = clk_get(NULL, "mpu");
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
@@ -136,13 +114,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
policy->cur = policy->min = policy->max = omap_getspeed(0);
- if (!cpu_is_omap34xx()) {
- clk_init_cpufreq_table(&freq_table);
- } else {
- struct device *mpu_dev = omap2_get_mpuss_device();
-
- opp_init_cpufreq_table(mpu_dev, &freq_table);
- }
+ clk_init_cpufreq_table(&freq_table);
if (freq_table) {
result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
@@ -184,7 +156,7 @@ static struct cpufreq_driver omap_driver = {
.get = omap_getspeed,
.init = omap_cpu_init,
.exit = omap_cpu_exit,
- .name = "omap",
+ .name = "omap1",
.attr = omap_cpufreq_attr,
};
@@ -193,12 +165,12 @@ static int __init omap_cpufreq_init(void)
return cpufreq_register_driver(&omap_driver);
}
-late_initcall(omap_cpufreq_init);
-
-/*
- * if ever we want to remove this, upon cleanup call:
- *
- * cpufreq_unregister_driver()
- * cpufreq_frequency_table_put_attr()
- */
+static void __exit omap_cpufreq_exit(void)
+{
+ cpufreq_unregister_driver(&omap_driver);
+}
+MODULE_DESCRIPTION("cpufreq driver for OMAP1 SOCs");
+MODULE_LICENSE("GPL");
+module_init(omap_cpufreq_init);
+module_exit(omap_cpufreq_exit);
@@ -56,6 +56,9 @@ obj-$(CONFIG_ARCH_OMAP3) += opp3xxx_data.o
obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o
endif
+# CPUFREQ driver
+obj-$(CONFIG_CPU_FREQ) += omap2plus-cpufreq.o
+
# Power Management
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
similarity index 76%
rename from arch/arm/plat-omap/cpu-omap.c
rename to arch/arm/mach-omap2/omap2plus-cpufreq.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/plat-omap/cpu-omap.c
+ * OMAP2PLUS cpufreq driver
*
* CPU frequency scaling for OMAP
*
@@ -27,31 +27,20 @@
#include <linux/io.h>
#include <linux/opp.h>
-#include <mach/hardware.h>
-#include <plat/clock.h>
#include <asm/system.h>
+#include <asm/smp_plat.h>
-#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)
+#include <plat/clock.h>
#include <plat/omap-pm.h>
#include <plat/common.h>
-#endif
+
+#include <mach/hardware.h>
#define VERY_HI_RATE 900000000
static struct cpufreq_frequency_table *freq_table;
-
-#ifdef CONFIG_ARCH_OMAP1
-#define MPU_CLK "mpu"
-#elif defined(CONFIG_ARCH_OMAP3)
-#define MPU_CLK "arm_fck"
-#else
-#define MPU_CLK "virt_prcm_set"
-#endif
-
static struct clk *mpu_clk;
-/* TODO: Add support for SDRAM timing changes */
-
static int omap_verify_speed(struct cpufreq_policy *policy)
{
if (freq_table)
@@ -85,14 +74,8 @@ static int omap_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
-#ifdef CONFIG_ARCH_OMAP1
- struct cpufreq_freqs freqs;
-#endif
-#if defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)
- unsigned long freq;
- struct device *mpu_dev = omap2_get_mpuss_device();
-#endif
int ret = 0;
+ struct cpufreq_freqs freqs;
/* Ensure desired rate is within allowed range. Some govenors
* (ondemand) will just pass target_freq=0 to get the minimum. */
@@ -101,33 +84,44 @@ static int omap_target(struct cpufreq_policy *policy,
if (target_freq > policy->max)
target_freq = policy->max;
-#ifdef CONFIG_ARCH_OMAP1
freqs.old = omap_getspeed(0);
freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
freqs.cpu = 0;
if (freqs.old == freqs.new)
return ret;
+
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
#ifdef CONFIG_CPU_FREQ_DEBUG
- printk(KERN_DEBUG "cpufreq-omap: transition: %u --> %u\n",
- freqs.old, freqs.new);
+ pr_info("cpufreq-omap: transition: %u --> %u\n", freqs.old, freqs.new);
#endif
+
ret = clk_set_rate(mpu_clk, freqs.new * 1000);
+ if (ret)
+ return ret;
+
+ /*
+ * Generic CPUFREQ driver jiffy update is under !SMP. So jiffies
+ * won't get updated when UP machine cpufreq build with
+ * CONFIG_SMP enabled. Below code is added only to manage that
+ * scenario
+ */
+ if (!is_smp())
+ loops_per_jiffy =
+ cpufreq_scale(loops_per_jiffy, freqs.old, freqs.new);
+
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-#elif defined(CONFIG_ARCH_OMAP3) && !defined(CONFIG_OMAP_PM_NONE)
- freq = target_freq * 1000;
- if (opp_find_freq_ceil(mpu_dev, &freq))
- omap_pm_cpu_set_freq(freq);
-#endif
+
return ret;
}
static int __init omap_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
+ struct device *mpu_dev;
- mpu_clk = clk_get(NULL, MPU_CLK);
+ mpu_clk = clk_get(NULL, "cpu_ck");
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
@@ -136,13 +130,12 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
policy->cur = policy->min = policy->max = omap_getspeed(0);
- if (!cpu_is_omap34xx()) {
- clk_init_cpufreq_table(&freq_table);
- } else {
- struct device *mpu_dev = omap2_get_mpuss_device();
-
- opp_init_cpufreq_table(mpu_dev, &freq_table);
+ mpu_dev = omap2_get_mpuss_device();
+ if (!mpu_dev) {
+ pr_warning("%s: unable to get the mpu device\n", __func__);
+ return -EINVAL;
}
+ opp_init_cpufreq_table(mpu_dev, &freq_table);
if (freq_table) {
result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
@@ -184,7 +177,7 @@ static struct cpufreq_driver omap_driver = {
.get = omap_getspeed,
.init = omap_cpu_init,
.exit = omap_cpu_exit,
- .name = "omap",
+ .name = "omap2plus",
.attr = omap_cpufreq_attr,
};
@@ -193,12 +186,12 @@ static int __init omap_cpufreq_init(void)
return cpufreq_register_driver(&omap_driver);
}
-late_initcall(omap_cpufreq_init);
-
-/*
- * if ever we want to remove this, upon cleanup call:
- *
- * cpufreq_unregister_driver()
- * cpufreq_frequency_table_put_attr()
- */
+static void __exit omap_cpufreq_exit(void)
+{
+ cpufreq_unregister_driver(&omap_driver);
+}
+MODULE_DESCRIPTION("cpufreq driver for OMAP2PLUS SOCs");
+MODULE_LICENSE("GPL");
+module_init(omap_cpufreq_init);
+module_exit(omap_cpufreq_exit);
@@ -21,7 +21,6 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
obj-$(CONFIG_OMAP_IOMMU_DEBUG) += iommu-debug.o
-obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o