[PATCH/RFC,14/19] OMAP2+: voltage: split voltage controller (VC) code into dedicated layer

Message ID	1300924833-26745-15-git-send-email-khilman@ti.com (mailing list archive)
State	New, archived
Headers	show Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p2O00CrH020570 for <patchwork-omap@patchwork.kernel.org>; Thu, 24 Mar 2011 00:00:45 GMT From: Kevin Hilman <khilman@ti.com> To: linux-omap@vger.kernel.org Cc: Paul Walmsely <paul@pwsan.com>, Benoit Cousson <b-cousson@ti.com> Subject: [PATCH/RFC 14/19] OMAP2+: voltage: split voltage controller (VC) code into dedicated layer Date: Wed, 23 Mar 2011 17:00:28 -0700 Message-Id: <1300924833-26745-15-git-send-email-khilman@ti.com> In-Reply-To: <1300924833-26745-1-git-send-email-khilman@ti.com> References: <1300924833-26745-1-git-send-email-khilman@ti.com> Sender: linux-omap-owner@vger.kernel.org Precedence: bulk

diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ce2105c..a0d8f61 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -90,7 +90,7 @@ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ # OMAP voltage domains ifeq ($(CONFIG_PM),y) -voltagedomain-common := voltage.o +voltagedomain-common := voltage.o vc.o obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \ voltagedomains2xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c new file mode 100644 index 0000000..4e65fdc --- /dev/null +++ b/arch/arm/mach-omap2/vc.c @@ -0,0 +1,276 @@ +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> + +#include <plat/cpu.h> + +#include "voltage.h" +#include "vc.h" +#include "prm-regbits-34xx.h" +#include "prm-regbits-44xx.h" +#include "prm44xx.h" + +/* Voltage scale and accessory APIs */ +int omap_vc_pre_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 *target_vsel, u8 *current_vsel) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + struct omap_volt_data *volt_data; + const struct omap_vc_common_data *vc_common; + const struct omap_vp_common_data *vp_common; + u32 vc_cmdval, vp_errgain_val; + + vc_common = vc->vc_common; + vp_common = vdd->vp_data->vp_common; + + /* Check if suffiecient pmic info is available for this vdd */ + if (!vdd->pmic_info) { + pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", + __func__, voltdm->name); + return -EINVAL; + } + + if (!vdd->pmic_info->uv_to_vsel) { + pr_err("%s: PMIC function to convert voltage in uV to" + "vsel not registered. Hence unable to scale voltage" + "for vdd_%s\n", __func__, voltdm->name); + return -ENODATA; + } + + if (!vdd->read_reg || !vdd->write_reg) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return -EINVAL; + } + + /* Get volt_data corresponding to target_volt */ + volt_data = omap_voltage_get_voltdata(voltdm, target_volt); + if (IS_ERR(volt_data)) + volt_data = NULL; + + *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); + *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); + + /* Setting the ON voltage to the new target voltage */ + vc_cmdval = vdd->read_reg(vc->vc_common->prm_mod, vc->cmdval_reg); + vc_cmdval &= ~vc_common->cmd_on_mask; + vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift); + vdd->write_reg(vc_cmdval, vc->vc_common->prm_mod, vc->cmdval_reg); + + /* Setting vp errorgain based on the voltage */ + if (volt_data) { + vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, + vdd->vp_data->vpconfig); + vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; + vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask; + vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << + vp_common->vpconfig_errorgain_shift; + vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod, + vdd->vp_data->vpconfig); + } + + return 0; +} + +void omap_vc_post_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 target_vsel, u8 current_vsel) +{ + struct omap_vdd_info *vdd = voltdm->vdd; + u32 smps_steps = 0, smps_delay = 0; + + smps_steps = abs(target_vsel - current_vsel); + /* SMPS slew rate / step size. 2us added as buffer. */ + smps_delay = ((smps_steps * vdd->pmic_info->step_size) / + vdd->pmic_info->slew_rate) + 2; + udelay(smps_delay); + + vdd->curr_volt = target_volt; +} + +/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */ +int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm, + unsigned long target_volt) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + u32 loop_cnt = 0, retries_cnt = 0; + u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; + u8 target_vsel, current_vsel; + int ret; + + ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, &current_vsel); + if (ret) + return ret; + + vc_valid = vc->vc_common->valid; + vc_bypass_val_reg = vc->vc_common->bypass_val_reg; + vc_bypass_value = (target_vsel << vc->vc_common->data_shift) | + (vdd->pmic_info->pmic_reg << + vc->vc_common->regaddr_shift) | + (vdd->pmic_info->i2c_slave_addr << + vc->vc_common->slaveaddr_shift); + + vdd->write_reg(vc_bypass_value, vc->vc_common->prm_mod, vc_bypass_val_reg); + vdd->write_reg(vc_bypass_value | vc_valid, vc->vc_common->prm_mod, + vc_bypass_val_reg); + + vc_bypass_value = vdd->read_reg(vc->vc_common->prm_mod, vc_bypass_val_reg); + /* + * Loop till the bypass command is acknowledged from the SMPS. + * NOTE: This is legacy code. The loop count and retry count needs + * to be revisited. + */ + while (!(vc_bypass_value & vc_valid)) { + loop_cnt++; + + if (retries_cnt > 10) { + pr_warning("%s: Retry count exceeded\n", __func__); + return -ETIMEDOUT; + } + + if (loop_cnt > 50) { + retries_cnt++; + loop_cnt = 0; + udelay(10); + } + vc_bypass_value = vdd->read_reg(vc->vc_common->prm_mod, + vc_bypass_val_reg); + } + + omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); + return 0; +} + +static void __init omap3_vfsm_init(struct voltagedomain *voltdm) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + + /* + * Voltage Manager FSM parameters init + * XXX This data should be passed in from the board file + */ + vdd->write_reg(OMAP3_CLKSETUP, vc->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET); + vdd->write_reg(OMAP3_VOLTOFFSET, vc->vc_common->prm_mod, + OMAP3_PRM_VOLTOFFSET_OFFSET); + vdd->write_reg(OMAP3_VOLTSETUP2, vc->vc_common->prm_mod, + OMAP3_PRM_VOLTSETUP2_OFFSET); +} + +static void __init omap3_vc_init(struct voltagedomain *voltdm) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + static bool is_initialized; + u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; + u32 vc_val; + + if (is_initialized) + return; + + /* Set up the on, inactive, retention and off voltage */ + on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); + onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); + ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); + off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); + vc_val = ((on_vsel << vc->vc_common->cmd_on_shift) | + (onlp_vsel << vc->vc_common->cmd_onlp_shift) | + (ret_vsel << vc->vc_common->cmd_ret_shift) | + (off_vsel << vc->vc_common->cmd_off_shift)); + vdd->write_reg(vc_val, vc->vc_common->prm_mod, vc->cmdval_reg); + + /* + * Generic VC parameters init + * XXX This data should be abstracted out + */ + vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vc->vc_common->prm_mod, + OMAP3_PRM_VC_CH_CONF_OFFSET); + vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vc->vc_common->prm_mod, + OMAP3_PRM_VC_I2C_CFG_OFFSET); + + omap3_vfsm_init(voltdm); + + is_initialized = true; +} + + +/* OMAP4 specific voltage init functions */ +static void __init omap4_vc_init(struct voltagedomain *voltdm) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + static bool is_initialized; + u32 vc_val; + + if (is_initialized) + return; + + /* TODO: Configure setup times and CMD_VAL values*/ + + /* + * Generic VC parameters init + * XXX This data should be abstracted out + */ + vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | + OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | + OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); + vdd->write_reg(vc_val, vc->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); + + /* XXX These are magic numbers and do not belong! */ + vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); + vdd->write_reg(vc_val, vc->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); + + is_initialized = true; +} + +void __init omap_vc_init(struct voltagedomain *voltdm) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + u32 vc_val; + + if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { + pr_err("%s: PMIC info requried to configure vc for" + "vdd_%s not populated.Hence cannot initialize vc\n", + __func__, voltdm->name); + return; + } + + if (!vdd->read_reg || !vdd->write_reg) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + /* Set up the SMPS_SA(i2c slave address in VC */ + vc_val = vdd->read_reg(vc->vc_common->prm_mod, + vc->vc_common->smps_sa_reg); + vc_val &= ~vc->smps_sa_mask; + vc_val |= vdd->pmic_info->i2c_slave_addr << vc->smps_sa_shift; + vdd->write_reg(vc_val, vc->vc_common->prm_mod, + vc->vc_common->smps_sa_reg); + + /* Setup the VOLRA(pmic reg addr) in VC */ + vc_val = vdd->read_reg(vc->vc_common->prm_mod, + vc->vc_common->smps_volra_reg); + vc_val &= ~vc->smps_volra_mask; + vc_val |= vdd->pmic_info->pmic_reg << vc->smps_volra_shift; + vdd->write_reg(vc_val, vc->vc_common->prm_mod, + vc->vc_common->smps_volra_reg); + + /* Configure the setup times */ + vc_val = vdd->read_reg(vc->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); + vc_val &= ~vdd->vfsm->voltsetup_mask; + vc_val |= vdd->pmic_info->volt_setup_time << + vdd->vfsm->voltsetup_shift; + vdd->write_reg(vc_val, vc->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); + + if (cpu_is_omap34xx()) + omap3_vc_init(voltdm); + else if (cpu_is_omap44xx()) + omap4_vc_init(voltdm); +} + diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index f7338af..b823e5b 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -19,6 +19,8 @@ #include <linux/kernel.h> +struct voltagedomain; + /** * struct omap_vc_common_data - per-VC register/bitfield data * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register @@ -81,5 +83,15 @@ extern struct omap_vc_instance_data omap4_vc_mpu_data; extern struct omap_vc_instance_data omap4_vc_iva_data; extern struct omap_vc_instance_data omap4_vc_core_data; +void omap_vc_init(struct voltagedomain *voltdm); +int omap_vc_pre_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 *target_vsel, u8 *current_vsel); +void omap_vc_post_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 target_vsel, u8 current_vsel); +int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm, + unsigned long target_volt); + #endif diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index b1b5e38..8a47dd1 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -293,136 +293,6 @@ static void __init vdd_debugfs_init(struct voltagedomain *voltdm) &nom_volt_debug_fops); } -/* Voltage scale and accessory APIs */ -static int _pre_volt_scale(struct voltagedomain *voltdm, - unsigned long target_volt, u8 *target_vsel, u8 *current_vsel) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - struct omap_volt_data *volt_data; - const struct omap_vc_common_data *vc_common; - const struct omap_vp_common_data *vp_common; - u32 vc_cmdval, vp_errgain_val; - - vc_common = vdd->vc_data->vc_common; - vp_common = vdd->vp_data->vp_common; - - /* Check if suffiecient pmic info is available for this vdd */ - if (!vdd->pmic_info) { - pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", - __func__, voltdm->name); - return -EINVAL; - } - - if (!vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC function to convert voltage in uV to" - "vsel not registered. Hence unable to scale voltage" - "for vdd_%s\n", __func__, voltdm->name); - return -ENODATA; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return -EINVAL; - } - - /* Get volt_data corresponding to target_volt */ - volt_data = omap_voltage_get_voltdata(voltdm, target_volt); - if (IS_ERR(volt_data)) - volt_data = NULL; - - *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); - *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); - - /* Setting the ON voltage to the new target voltage */ - vc_cmdval = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg); - vc_cmdval &= ~vc_common->cmd_on_mask; - vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift); - vdd->write_reg(vc_cmdval, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg); - - /* Setting vp errorgain based on the voltage */ - if (volt_data) { - vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, - vdd->vp_data->vpconfig); - vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; - vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask; - vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << - vp_common->vpconfig_errorgain_shift; - vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod, - vdd->vp_data->vpconfig); - } - - return 0; -} - -static void _post_volt_scale(struct voltagedomain *voltdm, - unsigned long target_volt, u8 target_vsel, u8 current_vsel) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - u32 smps_steps = 0, smps_delay = 0; - - smps_steps = abs(target_vsel - current_vsel); - /* SMPS slew rate / step size. 2us added as buffer. */ - smps_delay = ((smps_steps * vdd->pmic_info->step_size) / - vdd->pmic_info->slew_rate) + 2; - udelay(smps_delay); - - vdd->curr_volt = target_volt; -} - -/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */ -static int vc_bypass_scale_voltage(struct voltagedomain *voltdm, - unsigned long target_volt) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - u32 loop_cnt = 0, retries_cnt = 0; - u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; - u8 target_vsel, current_vsel; - int ret; - - ret = _pre_volt_scale(voltdm, target_volt, &target_vsel, &current_vsel); - if (ret) - return ret; - - vc_valid = vdd->vc_data->vc_common->valid; - vc_bypass_val_reg = vdd->vc_data->vc_common->bypass_val_reg; - vc_bypass_value = (target_vsel << vdd->vc_data->vc_common->data_shift) | - (vdd->pmic_info->pmic_reg << - vdd->vc_data->vc_common->regaddr_shift) | - (vdd->pmic_info->i2c_slave_addr << - vdd->vc_data->vc_common->slaveaddr_shift); - - vdd->write_reg(vc_bypass_value, vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg); - vdd->write_reg(vc_bypass_value | vc_valid, vdd->vc_data->vc_common->prm_mod, - vc_bypass_val_reg); - - vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg); - /* - * Loop till the bypass command is acknowledged from the SMPS. - * NOTE: This is legacy code. The loop count and retry count needs - * to be revisited. - */ - while (!(vc_bypass_value & vc_valid)) { - loop_cnt++; - - if (retries_cnt > 10) { - pr_warning("%s: Retry count exceeded\n", __func__); - return -ETIMEDOUT; - } - - if (loop_cnt > 50) { - retries_cnt++; - loop_cnt = 0; - udelay(10); - } - vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, - vc_bypass_val_reg); - } - - _post_volt_scale(voltdm, target_volt, target_vsel, current_vsel); - return 0; -} - /* VP force update method of voltage scaling */ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, unsigned long target_volt) @@ -432,7 +302,7 @@ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, u8 target_vsel, current_vsel; int ret, timeout = 0; - ret = _pre_volt_scale(voltdm, target_volt, &target_vsel, &current_vsel); + ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, &current_vsel); if (ret) return ret; @@ -485,7 +355,7 @@ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, "TRANXDONE never got set after the voltage update\n", __func__, voltdm->name); - _post_volt_scale(voltdm, target_volt, target_vsel, current_vsel); + omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); /* * Disable TransactionDone interrupt , clear all status, clear @@ -517,132 +387,6 @@ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, return 0; } -static void __init omap3_vfsm_init(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - - /* - * Voltage Manager FSM parameters init - * XXX This data should be passed in from the board file - */ - vdd->write_reg(OMAP3_CLKSETUP, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET); - vdd->write_reg(OMAP3_VOLTOFFSET, vdd->vc_data->vc_common->prm_mod, - OMAP3_PRM_VOLTOFFSET_OFFSET); - vdd->write_reg(OMAP3_VOLTSETUP2, vdd->vc_data->vc_common->prm_mod, - OMAP3_PRM_VOLTSETUP2_OFFSET); -} - -static void __init omap3_vc_init(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - static bool is_initialized; - u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; - u32 vc_val; - - if (is_initialized) - return; - - /* Set up the on, inactive, retention and off voltage */ - on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); - onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); - ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); - off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); - vc_val = ((on_vsel << vdd->vc_data->vc_common->cmd_on_shift) | - (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) | - (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) | - (off_vsel << vdd->vc_data->vc_common->cmd_off_shift)); - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg); - - /* - * Generic VC parameters init - * XXX This data should be abstracted out - */ - vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vdd->vc_data->vc_common->prm_mod, - OMAP3_PRM_VC_CH_CONF_OFFSET); - vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vdd->vc_data->vc_common->prm_mod, - OMAP3_PRM_VC_I2C_CFG_OFFSET); - - omap3_vfsm_init(voltdm); - - is_initialized = true; -} - - -/* OMAP4 specific voltage init functions */ -static void __init omap4_vc_init(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - static bool is_initialized; - u32 vc_val; - - if (is_initialized) - return; - - /* TODO: Configure setup times and CMD_VAL values*/ - - /* - * Generic VC parameters init - * XXX This data should be abstracted out - */ - vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | - OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | - OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); - - /* XXX These are magic numbers and do not belong! */ - vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); - - is_initialized = true; -} - -static void __init omap_vc_init(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - u32 vc_val; - - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, voltdm->name); - return; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return; - } - - /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, - vdd->vc_data->vc_common->smps_sa_reg); - vc_val &= ~vdd->vc_data->smps_sa_mask; - vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift; - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, - vdd->vc_data->vc_common->smps_sa_reg); - - /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, - vdd->vc_data->vc_common->smps_volra_reg); - vc_val &= ~vdd->vc_data->smps_volra_mask; - vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift; - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, - vdd->vc_data->vc_common->smps_volra_reg); - - /* Configure the setup times */ - vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); - vc_val &= ~vdd->vfsm->voltsetup_mask; - vc_val |= vdd->pmic_info->volt_setup_time << - vdd->vfsm->voltsetup_shift; - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); - - if (cpu_is_omap34xx()) - omap3_vc_init(voltdm); - else if (cpu_is_omap44xx()) - omap4_vc_init(voltdm); -} - static int __init omap_vdd_data_configure(struct voltagedomain *voltdm) { struct omap_vdd_info *vdd = voltdm->vdd; @@ -1025,7 +769,7 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm, vdd->volt_scale = vp_forceupdate_scale_voltage; return; case VOLTSCALE_VCBYPASS: - vdd->volt_scale = vc_bypass_scale_voltage; + vdd->volt_scale = omap_vc_bypass_scale_voltage; return; default: pr_warning("%s: Trying to change the method of voltage scaling"

[PATCH/RFC,14/19] OMAP2+: voltage: split voltage controller (VC) code into dedicated layer

Commit Message

Patch