@@ -23,6 +23,7 @@
* struct omap_vc_common_data - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
* @valid: VALID bitmask in PRM_VC_BYPASS_VAL register
+ * @prm_mod: PRM module id used for PRM register access
* @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start
* @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start
* @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start
@@ -40,6 +41,7 @@
struct omap_vc_common_data {
u32 cmd_on_mask;
u32 valid;
+ s16 prm_mod;
u8 smps_sa_reg;
u8 smps_volra_reg;
u8 bypass_val_reg;
@@ -30,6 +30,7 @@
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
static struct omap_vc_common_data omap3_vc_common = {
+ .prm_mod = OMAP3430_GR_MOD,
.smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET,
.smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET,
.bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET,
@@ -31,6 +31,7 @@
* XXX This stuff presumably belongs in the vc3xxx.c or vc.c file.
*/
static const struct omap_vc_common_data omap4_vc_common = {
+ .prm_mod = OMAP4430_PRM_DEVICE_INST,
.smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET,
.smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET,
.bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET,
@@ -50,10 +50,6 @@ static struct omap_vdd_info **vdd_info;
*/
static int nr_scalable_vdd;
-/* XXX document */
-static s16 prm_mod_offs;
-static s16 prm_irqst_ocp_mod_offs;
-
static struct dentry *voltage_dir;
/* Init function pointers */
@@ -147,7 +143,7 @@ static int vp_volt_debug_get(void *data, u64 *val)
return -EINVAL;
}
- vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
+ vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
if (!vdd->pmic_info->vsel_to_uv) {
pr_warning("PMIC function to convert vsel to voltage"
@@ -197,19 +193,19 @@ static void vp_latch_vsel(struct omap_vdd_info *vdd)
vsel = vdd->pmic_info->uv_to_vsel(uvdc);
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask |
vdd->vp_data->vp_common->vpconfig_initvdd);
vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Trigger initVDD value copy to voltage processor */
vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd),
- prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Clear initVDD copy trigger bit */
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
}
/* Generic voltage init functions */
@@ -227,19 +223,19 @@ static void __init vp_init(struct omap_vdd_info *vdd)
(vdd->vp_rt_data.vpconfig_errorgain <<
vdd->vp_data->vp_common->vpconfig_errorgain_shift) |
vdd->vp_data->vp_common->vpconfig_timeouten;
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin <<
vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) |
(vdd->vp_rt_data.vstepmin_stepmin <<
vdd->vp_data->vp_common->vstepmin_stepmin_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstepmin);
vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax <<
vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) |
(vdd->vp_rt_data.vstepmax_stepmax <<
vdd->vp_data->vp_common->vstepmax_stepmax_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstepmax);
vp_val = ((vdd->vp_rt_data.vlimitto_vddmax <<
vdd->vp_data->vp_common->vlimitto_vddmax_shift) |
@@ -247,7 +243,7 @@ static void __init vp_init(struct omap_vdd_info *vdd)
vdd->vp_data->vp_common->vlimitto_vddmin_shift) |
(vdd->vp_rt_data.vlimitto_timeout <<
vdd->vp_data->vp_common->vlimitto_timeout_shift));
- vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto);
+ vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vlimitto);
}
static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
@@ -336,23 +332,23 @@ static int _pre_volt_scale(struct omap_vdd_info *vdd,
volt_data = NULL;
*target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
- *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
+ *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
/* Setting the ON voltage to the new target voltage */
- vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg);
+ vc_cmdval = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
vc_cmdval &= ~vc_common->cmd_on_mask;
vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift);
- vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg);
+ vdd->write_reg(vc_cmdval, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
/* Setting vp errorgain based on the voltage */
if (volt_data) {
- vp_errgain_val = vdd->read_reg(prm_mod_offs,
+ vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod,
vdd->vp_data->vpconfig);
vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain;
vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask;
vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain <<
vp_common->vpconfig_errorgain_shift;
- vdd->write_reg(vp_errgain_val, prm_mod_offs,
+ vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod,
vdd->vp_data->vpconfig);
}
@@ -394,11 +390,11 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
(vdd->pmic_info->i2c_slave_addr <<
vdd->vc_data->vc_common->slaveaddr_shift);
- vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg);
- vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs,
+ vdd->write_reg(vc_bypass_value, vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg);
+ vdd->write_reg(vc_bypass_value | vc_valid, vdd->vc_data->vc_common->prm_mod,
vc_bypass_val_reg);
- vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg);
+ vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg);
/*
* Loop till the bypass command is acknowledged from the SMPS.
* NOTE: This is legacy code. The loop count and retry count needs
@@ -417,7 +413,7 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd,
loop_cnt = 0;
udelay(10);
}
- vc_bypass_value = vdd->read_reg(prm_mod_offs,
+ vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
vc_bypass_val_reg);
}
@@ -445,8 +441,8 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
*/
while (timeout++ < VP_TRANXDONE_TIMEOUT) {
vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
+ vdd->prm_irqst_mod, prm_irqst_reg);
+ if (!(vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) &
vdd->vp_data->prm_irqst_data->tranxdone_status))
break;
udelay(1);
@@ -458,28 +454,28 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
}
/* Configure for VP-Force Update */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd |
vdd->vp_data->vp_common->vpconfig_forceupdate |
vdd->vp_data->vp_common->vpconfig_initvoltage_mask);
vpconfig |= ((target_vsel <<
vdd->vp_data->vp_common->vpconfig_initvoltage_shift));
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Trigger initVDD value copy to voltage processor */
vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Force update of voltage */
vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/*
* Wait for TransactionDone. Typical latency is <200us.
* Depends on SMPSWAITTIMEMIN/MAX and voltage change
*/
timeout = 0;
- omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
+ omap_test_timeout((vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) &
vdd->vp_data->prm_irqst_data->tranxdone_status),
VP_TRANXDONE_TIMEOUT, timeout);
if (timeout >= VP_TRANXDONE_TIMEOUT)
@@ -496,8 +492,8 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
timeout = 0;
while (timeout++ < VP_TRANXDONE_TIMEOUT) {
vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status,
- prm_irqst_ocp_mod_offs, prm_irqst_reg);
- if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) &
+ vdd->prm_irqst_mod, prm_irqst_reg);
+ if (!(vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) &
vdd->vp_data->prm_irqst_data->tranxdone_status))
break;
udelay(1);
@@ -508,13 +504,13 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd,
"to clear the TRANXDONE status\n",
__func__, vdd->voltdm.name);
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Clear initVDD copy trigger bit */
vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/* Clear force bit */
vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
return 0;
}
@@ -525,10 +521,10 @@ static void __init omap3_vfsm_init(struct omap_vdd_info *vdd)
* Voltage Manager FSM parameters init
* XXX This data should be passed in from the board file
*/
- vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET);
- vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs,
+ vdd->write_reg(OMAP3_CLKSETUP, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET);
+ vdd->write_reg(OMAP3_VOLTOFFSET, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VOLTOFFSET_OFFSET);
- vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs,
+ vdd->write_reg(OMAP3_VOLTSETUP2, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VOLTSETUP2_OFFSET);
}
@@ -550,15 +546,15 @@ static void __init omap3_vc_init(struct omap_vdd_info *vdd)
(onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) |
(ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) |
(off_vsel << vdd->vc_data->vc_common->cmd_off_shift));
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
/*
* Generic VC parameters init
* XXX This data should be abstracted out
*/
- vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs,
+ vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VC_CH_CONF_OFFSET);
- vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs,
+ vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vdd->vc_data->vc_common->prm_mod,
OMAP3_PRM_VC_I2C_CFG_OFFSET);
omap3_vfsm_init(vdd);
@@ -585,11 +581,11 @@ static void __init omap4_vc_init(struct omap_vdd_info *vdd)
vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
/* XXX These are magic numbers and do not belong! */
vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
- vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
is_initialized = true;
}
@@ -612,27 +608,27 @@ static void __init omap_vc_init(struct omap_vdd_info *vdd)
}
/* Set up the SMPS_SA(i2c slave address in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
+ vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_sa_reg);
vc_val &= ~vdd->vc_data->smps_sa_mask;
vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_sa_reg);
/* Setup the VOLRA(pmic reg addr) in VC */
- vc_val = vdd->read_reg(prm_mod_offs,
+ vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_volra_reg);
vc_val &= ~vdd->vc_data->smps_volra_mask;
vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift;
- vdd->write_reg(vc_val, prm_mod_offs,
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod,
vdd->vc_data->vc_common->smps_volra_reg);
/* Configure the setup times */
- vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg);
+ vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
vc_val &= ~vdd->vfsm->voltsetup_mask;
vc_val |= vdd->pmic_info->volt_setup_time <<
vdd->vfsm->voltsetup_shift;
- vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg);
+ vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
if (cpu_is_omap34xx())
omap3_vc_init(vdd);
@@ -713,7 +709,7 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm)
return 0;
}
- curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage);
+ curr_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) {
pr_warning("%s: PMIC function to convert vsel to voltage"
@@ -755,9 +751,9 @@ void omap_vp_enable(struct voltagedomain *voltdm)
vp_latch_vsel(vdd);
/* Enable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vdd->vp_enabled = true;
}
@@ -794,14 +790,14 @@ void omap_vp_disable(struct voltagedomain *voltdm)
}
/* Disable VP */
- vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig);
+ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable;
- vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig);
+ vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig);
/*
* Wait for VP idle Typical latency is <2us. Maximum latency is ~100us
*/
- omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)),
+ omap_test_timeout((vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstatus)),
VP_IDLE_TIMEOUT, timeout);
if (timeout >= VP_IDLE_TIMEOUT)
@@ -1094,12 +1090,9 @@ int __init omap_voltage_late_init(void)
}
/* XXX document */
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod,
- struct omap_vdd_info *omap_vdd_array[],
+int __init omap_voltage_early_init(struct omap_vdd_info *omap_vdd_array[],
u8 omap_vdd_count)
{
- prm_mod_offs = prm_mod;
- prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod;
vdd_info = omap_vdd_array;
nr_scalable_vdd = omap_vdd_count;
return 0;
@@ -119,6 +119,7 @@ struct omap_volt_pmic_info {
* @voltdm : pointer to the voltage domain structure
* @debug_dir : debug directory for this voltage domain.
* @curr_volt : current voltage for this vdd.
+ * @prm_irqst_mod : PRM module id used for PRM IRQ status register access
* @vp_enabled : flag to keep track of whether vp is enabled or not
* @volt_scale : API to scale the voltage of the vdd.
*/
@@ -133,6 +134,8 @@ struct omap_vdd_info {
struct dentry *debug_dir;
u32 curr_volt;
bool vp_enabled;
+
+ s16 prm_irqst_mod;
u32 (*read_reg) (u16 mod, u8 offset);
void (*write_reg) (u32 val, u16 mod, u8 offset);
int (*volt_scale) (struct omap_vdd_info *vdd,
@@ -151,8 +154,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
unsigned long volt);
unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm);
struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm);
-int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod,
- struct omap_vdd_info *omap_vdd_array[],
+int __init omap_voltage_early_init(struct omap_vdd_info *omap_vdd_array[],
u8 omap_vdd_count);
#ifdef CONFIG_PM
int omap_voltage_register_pmic(struct voltagedomain *voltdm,
@@ -38,6 +38,7 @@ static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = {
};
static struct omap_vdd_info omap3_vdd1_info = {
+ .prm_irqst_mod = OCP_MOD,
.vp_data = &omap3_vp1_data,
.vc_data = &omap3_vc1_data,
.vfsm = &omap3_vdd1_vfsm_data,
@@ -53,6 +54,7 @@ static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = {
};
static struct omap_vdd_info omap3_vdd2_info = {
+ .prm_irqst_mod = OCP_MOD,
.vp_data = &omap3_vp2_data,
.vc_data = &omap3_vc2_data,
.vfsm = &omap3_vdd2_vfsm_data,
@@ -70,9 +72,6 @@ static struct omap_vdd_info *omap3_vdd_info[] = {
/* OMAP3 specific voltage init functions */
static int __init omap3xxx_voltage_early_init(void)
{
- s16 prm_mod = OMAP3430_GR_MOD;
- s16 prm_irqst_ocp_mod = OCP_MOD;
-
if (!cpu_is_omap34xx())
return 0;
@@ -88,8 +87,7 @@ static int __init omap3xxx_voltage_early_init(void)
omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data;
}
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap3_vdd_info,
+ return omap_voltage_early_init(omap3_vdd_info,
ARRAY_SIZE(omap3_vdd_info));
};
core_initcall(omap3xxx_voltage_early_init);
@@ -37,6 +37,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = {
};
static struct omap_vdd_info omap4_vdd_mpu_info = {
+ .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.vp_data = &omap4_vp_mpu_data,
.vc_data = &omap4_vc_mpu_data,
.vfsm = &omap4_vdd_mpu_vfsm_data,
@@ -50,6 +51,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = {
};
static struct omap_vdd_info omap4_vdd_iva_info = {
+ .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.vp_data = &omap4_vp_iva_data,
.vc_data = &omap4_vc_iva_data,
.vfsm = &omap4_vdd_iva_vfsm_data,
@@ -63,6 +65,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = {
};
static struct omap_vdd_info omap4_vdd_core_info = {
+ .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST,
.vp_data = &omap4_vp_core_data,
.vc_data = &omap4_vc_core_data,
.vfsm = &omap4_vdd_core_vfsm_data,
@@ -81,9 +84,6 @@ static struct omap_vdd_info *omap4_vdd_info[] = {
/* OMAP4 specific voltage init functions */
static int __init omap44xx_voltage_early_init(void)
{
- s16 prm_mod = OMAP4430_PRM_DEVICE_INST;
- s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST;
-
if (!cpu_is_omap44xx())
return 0;
@@ -95,8 +95,7 @@ static int __init omap44xx_voltage_early_init(void)
omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data;
omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data;
- return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod,
- omap4_vdd_info,
+ return omap_voltage_early_init(omap4_vdd_info,
ARRAY_SIZE(omap4_vdd_info));
};
core_initcall(omap44xx_voltage_early_init);
@@ -42,6 +42,7 @@
* @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg
* @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg
* @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg
+ * @prm_mod: PRM module id used for PRM register access
*
* XXX It it not necessary to have both a mask and a shift for the same
* bitfield - remove one
@@ -54,6 +55,7 @@ struct omap_vp_common_data {
u32 vpconfig_initvdd;
u32 vpconfig_forceupdate;
u32 vpconfig_vpenable;
+ s16 prm_mod;
u8 vpconfig_erroroffset_shift;
u8 vpconfig_errorgain_shift;
u8 vpconfig_initvoltage_shift;
@@ -31,6 +31,7 @@
* XXX This stuff presumably belongs in the vp3xxx.c or vp.c file.
*/
static const struct omap_vp_common_data omap3_vp_common = {
+ .prm_mod = OMAP3430_GR_MOD,
.vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT,
.vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK,
.vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT,
@@ -32,6 +32,7 @@
* XXX This stuff presumably belongs in the vp44xx.c or vp.c file.
*/
static const struct omap_vp_common_data omap4_vp_common = {
+ .prm_mod = OMAP4430_PRM_DEVICE_INST,
.vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT,
.vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK,
.vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT,