@@ -25,7 +25,7 @@
* ON(Inactive) OFF ON(Inactive)
* OFF OFF CSWR
* OFF OFF OSWR (*TBD)
- * OFF OFF OFF* (*TBD)
+ * OFF OFF OFF
* ----------------------------------------------
*
* Note: CPU0 is the master core and it is the last CPU to go down
@@ -293,6 +293,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
* Check MPUSS next state and save GIC if needed
* GIC lost during MPU OFF and OSWR
*/
+ pwrdm_clear_all_prev_pwrst(mpuss_pd);
if (pwrdm_read_next_pwrst(mpuss_pd) == PWRDM_POWER_OFF) {
omap_wakeupgen_save();
gic_save_context();
@@ -414,6 +415,9 @@ int __init omap4_mpuss_init(void)
return -ENODEV;
}
+ /* Clear CPU previous power domain state */
+ pwrdm_clear_all_prev_pwrst(mpuss_pd);
+
/*
* Find out how many interrupts are supported.
* OMAP4 supports max of 128 SPIs where as GIC can support
@@ -1,8 +1,9 @@
/*
* OMAP4 Power Management Routines
*
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010-2011 Texas Instruments, Inc.
* Rajendra Nayak <rnayak@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -35,7 +36,48 @@ static LIST_HEAD(pwrst_list);
#ifdef CONFIG_SUSPEND
static int omap4_pm_suspend(void)
{
- do_wfi();
+ struct power_state *pwrst;
+ int state, ret = 0;
+ u32 cpu_id = smp_processor_id();
+
+ /* Save current powerdomain state */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+ }
+
+ /* Set targeted power domain states by suspend */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+ }
+
+ /*
+ * For MPUSS to hit power domain retention(CSWR or OSWR),
+ * CPU0 and CPU1 power domain needs to be in OFF or DORMANT
+ * state. For MPUSS to reach off-mode. CPU0 and CPU1 power domain
+ * should be in off state.
+ * Only master CPU followes suspend path. All other CPUs follow
+ * cpu-hotplug path in system wide suspend. On OMAP4, CPU power
+ * domain CSWR is not supported by hardware.
+ * More details can be found in OMAP4430 TRM section 4.3.4.2.
+ */
+ omap4_enter_lowpower(cpu_id, PWRDM_POWER_OFF);
+
+ /* Restore next powerdomain state */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+ if (state > pwrst->next_state) {
+ pr_info("Powerdomain (%s) didn't enter "
+ "target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
+ ret = -1;
+ }
+ omap_set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+ }
+ if (ret)
+ pr_err("Could not enter target state in pm_suspend\n");
+ else
+ pr_err("Successfully put all powerdomains to target state\n");
+
return 0;
}
@@ -98,14 +140,31 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
if (!pwrdm->pwrsts)
return 0;
+ /*
+ * Skip CPU0 and CPU1 power domains. CPU1 is programmed
+ * through hotplug path and CPU0 explicitly programmed
+ * further down in the code path
+ */
+ if ((!strcmp(pwrdm->name, "cpu0_pwrdm")) ||
+ (!strcmp(pwrdm->name, "cpu1_pwrdm")))
+ return 0;
+
+ /*
+ * FIXME: Remove this check when core retention is supported
+ * Only MPUSS power domain is added in the list.
+ */
+ if (strcmp(pwrdm->name, "mpu_pwrdm"))
+ return 0;
+
pwrst = kmalloc(sizeof(struct power_state), GFP_ATOMIC);
if (!pwrst)
return -ENOMEM;
+
pwrst->pwrdm = pwrdm;
- pwrst->next_state = PWRDM_POWER_ON;
+ pwrst->next_state = PWRDM_POWER_OFF;
list_add(&pwrst->node, &pwrst_list);
- return pwrdm_set_next_pwrst(pwrst->pwrdm, pwrst->next_state);
+ return omap_set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
}
/**