diff mbox

[2/5] OMAP: DSS2: DSI: fix dsi_dump_clocks()

Message ID 1302677417-4590-3-git-send-email-tomi.valkeinen@ti.com (mailing list archive)
State Accepted
Delegated to: Tomi Valkeinen
Headers show

Commit Message

Tomi Valkeinen April 13, 2011, 6:50 a.m. UTC 
On OMAP4, reading DSI_PLL_CONFIGURATION2 register requires the L3 clock
(CIO_CLK_ICG) to PLL. Currently dsi_dump_clocks() tries to read that
register without enabling the L3 clock, leading to crash if DSI is not
in use.

The status of the bit being read from DSI_PLL_CONFIGURATION2 is
available from dsi_clock_info->use_sys_clk, so we can avoid the whole
problem by just using that.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c |    6 +-----
 1 files changed, 1 insertions(+), 5 deletions(-)
diff mbox

Patch

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 74334b5..1cc4f37 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -1481,7 +1481,6 @@  void dsi_pll_uninit(void)
 
 void dsi_dump_clocks(struct seq_file *s)
 {
-	int clksel;
 	struct dsi_clock_info *cinfo = &dsi.current_cinfo;
 	enum omap_dss_clk_source dispc_clk_src, dsi_clk_src;
 
@@ -1490,13 +1489,10 @@  void dsi_dump_clocks(struct seq_file *s)
 
 	enable_clocks(1);
 
-	clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11);
-
 	seq_printf(s,	"- DSI PLL -\n");
 
 	seq_printf(s,	"dsi pll source = %s\n",
-			clksel == 0 ?
-			"dss_sys_clk" : "pclkfree");
+			cinfo->use_sys_clk ? "dss_sys_clk" : "pclkfree");
 
 	seq_printf(s,	"Fint\t\t%-16luregn %u\n", cinfo->fint, cinfo->regn);