new file mode 100644
@@ -0,0 +1,287 @@
+/*
+ * Header file required by picodlp panel driver
+ *
+ * Copyright (C) 2009-2011 Texas Instruments
+ * Author: Mythri P K <mythripk@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H
+#define __OMAP2_DISPLAY_PANEL_PICODLP_H
+
+/* Commands used for configuring picodlp panel */
+
+#define MAIN_STATUS 0x03
+#define PBC_CONTROL 0x08
+#define INPUT_SOURCE 0x0B
+#define INPUT_RESOLUTION 0x0C
+#define DATA_FORMAT 0x0D
+#define IMG_ROTATION 0x0E
+#define LONG_FLIP 0x0F
+#define SHORT_FLIP 0x10
+#define TEST_PAT_SELECT 0x11
+#define R_DRIVE_CURRENT 0x12
+#define G_DRIVE_CURRENT 0x13
+#define B_DRIVE_CURRENT 0x14
+#define READ_REG_SELECT 0x15
+#define RGB_DRIVER_ENABLE 0x16
+
+#define CPU_IF_MODE 0x18
+#define FRAME_RATE 0x19
+#define CPU_IF_SYNC_METHOD 0x1A
+#define CPU_IF_SOF 0x1B
+#define CPU_IF_EOF 0x1C
+#define CPU_IF_SLEEP 0x1D
+
+#define SEQUENCE_MODE 0x1E
+#define SOFT_RESET 0x1F
+#define FRONT_END_RESET 0x21
+#define AUTO_PWR_ENABLE 0x22
+
+#define VSYNC_LINE_DELAY 0x23
+#define CPU_PI_HORIZ_START 0x24
+#define CPU_PI_VERT_START 0x25
+#define CPU_PI_HORIZ_WIDTH 0x26
+#define CPU_PI_VERT_HEIGHT 0x27
+
+#define PIXEL_MASK_CROP 0x28
+#define CROP_FIRST_LINE 0x29
+#define CROP_LAST_LINE 0x2A
+#define CROP_FIRST_PIXEL 0x2B
+#define CROP_LAST_PIXEL 0x2C
+#define DMD_PARK_TRIGGER 0x2D
+
+#define MISC_REG 0x30
+
+/* AGC registers */
+#define AGC_CTRL 0x50
+#define AGC_CLIPPED_PIXS 0x55
+#define AGC_BRIGHT_PIXS 0x56
+#define AGC_BG_PIXS 0x57
+#define AGC_SAFETY_MARGIN 0x17
+
+/* Color Coordinate Adjustment registers */
+#define CCA_ENABLE 0x5E
+#define CCA_C1A 0x5F
+#define CCA_C1B 0x60
+#define CCA_C1C 0x61
+#define CCA_C2A 0x62
+#define CCA_C2B 0x63
+#define CCA_C2C 0x64
+#define CCA_C3A 0x65
+#define CCA_C3B 0x66
+#define CCA_C3C 0x67
+#define CCA_C7A 0x71
+#define CCA_C7B 0x72
+#define CCA_C7C 0x73
+
+/**
+ * DLP Pico Processor 2600 comes with flash
+ * We can do DMA operations from flash for accessing Look Up Tables
+ */
+#define FLASH_ADDR_BYTES 0x74
+#define FLASH_DUMMY_BYTES 0x75
+#define FLASH_WRITE_BYTES 0x76
+#define FLASH_READ_BYTES 0x77
+#define FLASH_OPCODE 0x78
+#define FLASH_START_ADDR 0x79
+#define FLASH_DUMMY2 0x7A
+#define FLASH_WRITE_DATA 0x7B
+
+#define TEMPORAL_DITH_DISABLE 0x7E
+#define SEQ_CONTROL 0x82
+#define SEQ_VECTOR 0x83
+
+/* DMD is Digital Micromirror Device */
+#define DMD_BLOCK_COUNT 0x84
+#define DMD_VCC_CONTROL 0x86
+#define DMD_PARK_PULSE_COUNT 0x87
+#define DMD_PARK_PULSE_WIDTH 0x88
+#define DMD_PARK_DELAY 0x89
+#define DMD_SHADOW_ENABLE 0x8E
+#define SEQ_STATUS 0x8F
+#define FLASH_CLOCK_CONTROL 0x98
+#define DMD_PARK 0x2D
+
+#define SDRAM_BIST_ENABLE 0x46
+#define DDR_DRIVER_STRENGTH 0x9A
+#define SDC_ENABLE 0x9D
+#define SDC_BUFF_SWAP_DISABLE 0xA3
+#define CURTAIN_CONTROL 0xA6
+#define DDR_BUS_SWAP_ENABLE 0xA7
+#define DMD_TRC_ENABLE 0xA8
+#define DMD_BUS_SWAP_ENABLE 0xA9
+
+#define ACTGEN_ENABLE 0xAE
+#define ACTGEN_CONTROL 0xAF
+#define ACTGEN_HORIZ_BP 0xB0
+#define ACTGEN_VERT_BP 0xB1
+
+/* Look Up Table access */
+#define CMT_SPLASH_LUT_START_ADDR 0xFA
+#define CMT_SPLASH_LUT_DEST_SELECT 0xFB
+#define CMT_SPLASH_LUT_DATA 0xFC
+#define SEQ_RESET_LUT_START_ADDR 0xFD
+#define SEQ_RESET_LUT_DEST_SELECT 0xFE
+#define SEQ_RESET_LUT_DATA 0xFF
+
+/* Input source definitions */
+#define PARALLEL_RGB 0
+#define INT_TEST_PATTERN 1
+#define SPLASH_SCREEN 2
+#define CPU_INTF 3
+#define BT656 4
+
+/* Standard input resolution definitions */
+#define QWVGA_LANDSCAPE 3 /* (427h*240v) */
+#define WVGA_864_LANDSCAPE 21 /* (864h*480v) */
+#define WVGA_DMD_OPTICAL_TEST 35 /* (608h*684v) */
+
+/* Standard data format definitions */
+#define RGB565 0
+#define RGB666 1
+#define RGB888 2
+
+/* Test Pattern definitions */
+#define TPG_CHECKERBOARD 0
+#define TPG_BLACK 1
+#define TPG_WHITE 2
+#define TPG_RED 3
+#define TPG_BLUE 4
+#define TPG_GREEN 5
+#define TPG_VLINES_BLACK 6
+#define TPG_HLINES_BLACK 7
+#define TPG_VLINES_ALT 8
+#define TPG_HLINES_ALT 9
+#define TPG_DIAG_LINES 10
+#define TPG_GREYRAMP_VERT 11
+#define TPG_GREYRAMP_HORIZ 12
+#define TPG_ANSI_CHECKERBOARD 13
+
+/* sequence mode definitions */
+#define SEQ_FREE_RUN 0
+#define SEQ_LOCK 1
+
+/* curtain color definitions */
+#define CURTAIN_BLACK 0
+#define CURTAIN_RED 1
+#define CURTAIN_GREEN 2
+#define CURTAIN_BLUE 3
+#define CURTAIN_YELLOW 4
+#define CURTAIN_MAGENTA 5
+#define CURTAIN_CYAN 6
+#define CURTAIN_WHITE 7
+
+/* LUT definitions */
+#define CMT_LUT_NONE 0
+#define CMT_LUT_GREEN 1
+#define CMT_LUT_RED 2
+#define CMT_LUT_BLUE 3
+#define CMT_LUT_ALL 4
+#define SPLASH_LUT 5
+
+#define SEQ_LUT_NONE 0
+#define SEQ_DRC_LUT_0 1
+#define SEQ_DRC_LUT_1 2
+#define SEQ_DRC_LUT_2 3
+#define SEQ_DRC_LUT_3 4
+#define SEQ_SEQ_LUT 5
+#define SEQ_DRC_LUT_ALL 6
+#define WPC_PROGRAM_LUT 7
+
+#define BITSTREAM_START_ADDR 0x00000000
+#define BITSTREAM_SIZE 0x00040000
+
+#define WPC_FW_0_START_ADDR 0x00040000
+#define WPC_FW_0_SIZE 0x00000ce8
+
+#define SEQUENCE_0_START_ADDR 0x00044000
+#define SEQUENCE_0_SIZE 0x00001000
+
+#define SEQUENCE_1_START_ADDR 0x00045000
+#define SEQUENCE_1_SIZE 0x00000d10
+
+#define SEQUENCE_2_START_ADDR 0x00046000
+#define SEQUENCE_2_SIZE 0x00000d10
+
+#define SEQUENCE_3_START_ADDR 0x00047000
+#define SEQUENCE_3_SIZE 0x00000d10
+
+#define SEQUENCE_4_START_ADDR 0x00048000
+#define SEQUENCE_4_SIZE 0x00000d10
+
+#define SEQUENCE_5_START_ADDR 0x00049000
+#define SEQUENCE_5_SIZE 0x00000d10
+
+#define SEQUENCE_6_START_ADDR 0x0004a000
+#define SEQUENCE_6_SIZE 0x00000d10
+
+#define CMT_LUT_0_START_ADDR 0x0004b200
+#define CMT_LUT_0_SIZE 0x00000600
+
+#define CMT_LUT_1_START_ADDR 0x0004b800
+#define CMT_LUT_1_SIZE 0x00000600
+
+#define CMT_LUT_2_START_ADDR 0x0004be00
+#define CMT_LUT_2_SIZE 0x00000600
+
+#define CMT_LUT_3_START_ADDR 0x0004c400
+#define CMT_LUT_3_SIZE 0x00000600
+
+#define CMT_LUT_4_START_ADDR 0x0004ca00
+#define CMT_LUT_4_SIZE 0x00000600
+
+#define CMT_LUT_5_START_ADDR 0x0004d000
+#define CMT_LUT_5_SIZE 0x00000600
+
+#define CMT_LUT_6_START_ADDR 0x0004d600
+#define CMT_LUT_6_SIZE 0x00000600
+
+#define DRC_TABLE_0_START_ADDR 0x0004dc00
+#define DRC_TABLE_0_SIZE 0x00000100
+
+#define SPLASH_0_START_ADDR 0x0004dd00
+#define SPLASH_0_SIZE 0x00032280
+
+#define SEQUENCE_7_START_ADDR 0x00080000
+#define SEQUENCE_7_SIZE 0x00000d10
+
+#define SEQUENCE_8_START_ADDR 0x00081800
+#define SEQUENCE_8_SIZE 0x00000d10
+
+#define SEQUENCE_9_START_ADDR 0x00083000
+#define SEQUENCE_9_SIZE 0x00000d10
+
+#define CMT_LUT_7_START_ADDR 0x0008e000
+#define CMT_LUT_7_SIZE 0x00000600
+
+#define CMT_LUT_8_START_ADDR 0x0008e800
+#define CMT_LUT_8_SIZE 0x00000600
+
+#define CMT_LUT_9_START_ADDR 0x0008f000
+#define CMT_LUT_9_SIZE 0x00000600
+
+#define SPLASH_1_START_ADDR 0x0009a000
+#define SPLASH_1_SIZE 0x00032280
+
+#define SPLASH_2_START_ADDR 0x000cd000
+#define SPLASH_2_SIZE 0x00032280
+
+#define SPLASH_3_START_ADDR 0x00100000
+#define SPLASH_3_SIZE 0x00032280
+
+#define OPT_SPLASH_0_START_ADDR 0x00134000
+#define OPT_SPLASH_0_SIZE 0x000cb100
+
+#endif