omap: usbhs: Fixed the crash during rmmod of ehci and ohci

Commit Message

Munegowda, Keshava May 16, 2011, 8:52 a.m. UTC

From: Keshava Munegowda <[e-mail]>

The disableing of clocks and freeing GPIO are changed
to fix the occurence of the crash of rmmod of ehci and ohci
drivers. The GPIOs should be freed after the spin locks are
unlocked.

Signed-off-by: Keshava Munegowda <[e-mail]>
---
 drivers/mfd/omap-usb-host.c |   27 +++++++++++++++++++--------
 1 files changed, 19 insertions(+), 8 deletions(-)

Patch

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 3ab9ffa..55c5d47 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -994,22 +994,33 @@  static void usbhs_disable(struct device *dev)
 			dev_dbg(dev, "operation timed out\n");
 	}
 
-	if (pdata->ehci_data->phy_reset) {
-		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
-			gpio_free(pdata->ehci_data->reset_gpio_port[0]);
-
-		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
-			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+	if (is_omap_usbhs_rev2(omap)) {
+		if (is_ehci_tll_mode(pdata->port_mode[0]))
+			clk_enable(omap->usbtll_p1_fck);
+		if (is_ehci_tll_mode(pdata->port_mode[1]))
+			clk_enable(omap->usbtll_p2_fck);
+		clk_disable(omap->utmi_p2_fck);
+		clk_disable(omap->utmi_p1_fck);
 	}
 
-	clk_disable(omap->utmi_p2_fck);
-	clk_disable(omap->utmi_p1_fck);
 	clk_disable(omap->usbtll_ick);
 	clk_disable(omap->usbtll_fck);
 	clk_disable(omap->usbhost_fs_fck);
 	clk_disable(omap->usbhost_hs_fck);
 	clk_disable(omap->usbhost_ick);
 
+	/* The gpio_free migh sleep; so unlock the spinlock */
+	spin_unlock_irqrestore(&omap->lock, flags);
+
+	if (pdata->ehci_data->phy_reset) {
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[0]);
+
+		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
+			gpio_free(pdata->ehci_data->reset_gpio_port[1]);
+	}
+	return;
+
 end_disble:
 	spin_unlock_irqrestore(&omap->lock, flags);
 }