From patchwork Sat Jul 16 08:15:42 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tarun Kanti DebBarma X-Patchwork-Id: 981462 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.4) with ESMTP id p6G8GTbl019554 for ; Sat, 16 Jul 2011 08:17:35 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752657Ab1GPIQe (ORCPT ); Sat, 16 Jul 2011 04:16:34 -0400 Received: from bear.ext.ti.com ([192.94.94.41]:49822 "EHLO bear.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752474Ab1GPIQZ (ORCPT ); Sat, 16 Jul 2011 04:16:25 -0400 Received: from dbdp20.itg.ti.com ([172.24.170.38]) by bear.ext.ti.com (8.13.7/8.13.7) with ESMTP id p6G8GI3i005448 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Sat, 16 Jul 2011 03:16:20 -0500 Received: from dbde71.ent.ti.com (localhost [127.0.0.1]) by dbdp20.itg.ti.com (8.13.8/8.13.8) with ESMTP id p6G8GItm025739; Sat, 16 Jul 2011 13:46:18 +0530 (IST) Received: from dbdp31.itg.ti.com (172.24.170.98) by DBDE71.ent.ti.com (172.24.170.149) with Microsoft SMTP Server id 8.3.106.1; Sat, 16 Jul 2011 13:46:18 +0530 Received: from localhost.localdomain ([172.24.190.145]) by dbdp31.itg.ti.com (8.13.8/8.13.8) with ESMTP id p6G8FqJR019170; Sat, 16 Jul 2011 13:46:14 +0530 (IST) From: Tarun Kanti DebBarma To: CC: , , , , Tarun Kanti DebBarma , Charulatha V Subject: [PATCH v4 REPOST 10/20] gpio/omap: use level/edge detect reg offsets Date: Sat, 16 Jul 2011 13:45:42 +0530 Message-ID: <1310804152-9243-11-git-send-email-tarun.kanti@ti.com> X-Mailer: git-send-email 1.6.0.4 In-Reply-To: <1310804152-9243-1-git-send-email-tarun.kanti@ti.com> References: <1310804152-9243-1-git-send-email-tarun.kanti@ti.com> MIME-Version: 1.0 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Sat, 16 Jul 2011 08:17:35 +0000 (UTC) By adding level and edge detection register offsets and then initializing them correctly according to OMAP versions during device registrations we can now remove lot of revision checks in these functions. Signed-off-by: Tarun Kanti DebBarma Signed-off-by: Charulatha V --- arch/arm/mach-omap2/gpio.c | 8 ++ arch/arm/plat-omap/include/plat/gpio.h | 4 + drivers/gpio/gpio-omap.c | 118 ++++++++++---------------------- 3 files changed, 48 insertions(+), 82 deletions(-) diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index fd05cea..8745c3a 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -109,6 +109,10 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; pdata->regs->ctrl = OMAP24XX_GPIO_CTRL; pdata->regs->wkup_status = OMAP24XX_GPIO_WAKE_EN; + pdata->regs->leveldetect0 = OMAP24XX_GPIO_LEVELDETECT0; + pdata->regs->leveldetect1 = OMAP24XX_GPIO_LEVELDETECT1; + pdata->regs->risingdetect = OMAP24XX_GPIO_RISINGDETECT; + pdata->regs->fallingdetect = OMAP24XX_GPIO_FALLINGDETECT; break; case 2: pdata->bank_type = METHOD_GPIO_44XX; @@ -127,6 +131,10 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; pdata->regs->ctrl = OMAP4_GPIO_CTRL; pdata->regs->wkup_status = OMAP4_GPIO_IRQWAKEN0; + pdata->regs->leveldetect0 = OMAP4_GPIO_LEVELDETECT0; + pdata->regs->leveldetect1 = OMAP4_GPIO_LEVELDETECT1; + pdata->regs->risingdetect = OMAP4_GPIO_RISINGDETECT; + pdata->regs->fallingdetect = OMAP4_GPIO_FALLINGDETECT; break; default: WARN(1, "Invalid gpio bank_type\n"); diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 817997d..7d12fe8 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -190,6 +190,10 @@ struct omap_gpio_reg_offs { u16 debounce_en; u16 ctrl; u16 wkup_status; + u16 leveldetect0; + u16 leveldetect1; + u16 risingdetect; + u16 fallingdetect; bool irqenable_inv; }; diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index fe02e7a..f895c15 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -256,15 +256,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, bank->enabled_non_wakeup_gpios &= ~gpio_bit; } - if (cpu_is_omap44xx()) { - bank->level_mask = - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); - } else { - bank->level_mask = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - } + bank->level_mask = + __raw_readl(bank->base + bank->regs->leveldetect0) | + __raw_readl(bank->base + bank->regs->leveldetect1); } #endif @@ -404,12 +398,12 @@ static int gpio_irq_type(struct irq_data *d, unsigned type) if (type & ~IRQ_TYPE_SENSE_MASK) return -EINVAL; - /* OMAP1 allows only only edge triggering */ - if (!cpu_class_is_omap2() - && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) + bank = irq_data_get_irq_chip_data(d); + + if (!bank->regs->leveldetect0 && + (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) return -EINVAL; - bank = irq_data_get_irq_chip_data(d); spin_lock_irqsave(&bank->lock, flags); retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type); spin_unlock_irqrestore(&bank->lock, flags); @@ -657,9 +651,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) isr &= 0x0000ffff; - if (cpu_class_is_omap2()) { + if (bank->level_mask) level_mask = bank->level_mask & enabled; - } /* clear edge sensitive interrupts before handler(s) are called so that we don't miss any interrupt occurred while @@ -1245,40 +1238,18 @@ void omap2_gpio_prepare_for_idle(int off_mode) if (!(bank->enabled_non_wakeup_gpios)) goto save_gpio_ctx; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP24XX_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP24XX_GPIO_RISINGDETECT); - } - - if (cpu_is_omap44xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP4_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP4_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP4_GPIO_RISINGDETECT); - } + bank->saved_datain = __raw_readl(bank->base + + bank->regs->datain); + l1 = __raw_readl(bank->base + bank->regs->fallingdetect); + l2 = __raw_readl(bank->base + bank->regs->risingdetect); bank->saved_fallingdetect = l1; bank->saved_risingdetect = l2; l1 &= ~bank->enabled_non_wakeup_gpios; l2 &= ~bank->enabled_non_wakeup_gpios; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(l1, bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + - OMAP24XX_GPIO_RISINGDETECT); - } - - if (cpu_is_omap44xx()) { - __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); - } + __raw_writel(l1, bank->base + bank->regs->fallingdetect); + __raw_writel(l2, bank->base + bank->regs->risingdetect); save_gpio_ctx: if (bank->get_context_loss_count) @@ -1315,21 +1286,11 @@ void omap2_gpio_resume_after_idle(void) if (!(bank->enabled_non_wakeup_gpios)) continue; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); - } - - if (cpu_is_omap44xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP4_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); - } + __raw_writel(bank->saved_fallingdetect, + bank->base + bank->regs->fallingdetect); + __raw_writel(bank->saved_risingdetect, + bank->base + bank->regs->risingdetect); + l = __raw_readl(bank->base + bank->regs->datain); /* Check if any of the non-wakeup interrupt GPIOs have changed * state. If so, generate an IRQ by software. This is @@ -1357,35 +1318,28 @@ void omap2_gpio_resume_after_idle(void) if (gen) { u32 old0, old1; + old0 = __raw_readl(bank->base + + bank->regs->leveldetect0); + old1 = __raw_readl(bank->base + + bank->regs->leveldetect1); + + __raw_writel(old0, bank->base + + bank->regs->leveldetect0); + __raw_writel(old1, bank->base + + bank->regs->leveldetect1); if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - old0 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); + old0 |= gen; + old1 |= gen; } if (cpu_is_omap44xx()) { - old0 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0 | l, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1 | l, bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP4_GPIO_LEVELDETECT1); + old0 |= l; + old1 |= l; } + __raw_writel(old0, bank->base + + bank->regs->leveldetect0); + __raw_writel(old1, bank->base + + bank->regs->leveldetect1); } } }