[PATCHv6,09/11] TEMP: OMAP: serial: remove padconf hacks

Commit Message

Tero Kristo July 25, 2011, 4:36 p.m. UTC

These are no longer needed as omap_hwmod takes care of multiplexing of pads.

Signed-off-by: Tero Kristo <[e-mail]>
---
 arch/arm/mach-omap2/serial.c |   25 +------------------------
 1 files changed, 1 insertions(+), 24 deletions(-)

Patch

diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 47c4353..3c1a108 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -73,7 +73,6 @@  struct omap_uart_state {
 	void __iomem *wk_st;
 	void __iomem *wk_en;
 	u32 wk_mask;
-	u32 padconf;
 	u32 dma_enabled;
 
 	struct clk *ick;
@@ -309,13 +308,6 @@  static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
 		v |= uart->wk_mask;
 		__raw_writel(v, uart->wk_en);
 	}
-
-	/* Ensure IOPAD wake-enables are set */
-	if (cpu_is_omap34xx() && uart->padconf) {
-		u16 v = omap_ctrl_readw(uart->padconf);
-		v |= OMAP3_PADCONF_WAKEUPENABLE0;
-		omap_ctrl_writew(v, uart->padconf);
-	}
 }
 
 static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
@@ -326,13 +318,6 @@  static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
 		v &= ~uart->wk_mask;
 		__raw_writel(v, uart->wk_en);
 	}
-
-	/* Ensure IOPAD wake-enables are cleared */
-	if (cpu_is_omap34xx() && uart->padconf) {
-		u16 v = omap_ctrl_readw(uart->padconf);
-		v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
-		omap_ctrl_writew(v, uart->padconf);
-	}
 }
 
 static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
@@ -479,7 +464,6 @@  static void omap_uart_idle_init(struct omap_uart_state *uart)
 	if (cpu_is_omap34xx() && !cpu_is_ti816x()) {
 		u32 mod = (uart->num > 1) ? OMAP3430_PER_MOD : CORE_MOD;
 		u32 wk_mask = 0;
-		u32 padconf = 0;
 
 		/* XXX These PRM accesses do not belong here */
 		uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
@@ -487,23 +471,18 @@  static void omap_uart_idle_init(struct omap_uart_state *uart)
 		switch (uart->num) {
 		case 0:
 			wk_mask = OMAP3430_ST_UART1_MASK;
-			padconf = 0x182;
 			break;
 		case 1:
 			wk_mask = OMAP3430_ST_UART2_MASK;
-			padconf = 0x17a;
 			break;
 		case 2:
 			wk_mask = OMAP3430_ST_UART3_MASK;
-			padconf = 0x19e;
 			break;
 		case 3:
 			wk_mask = OMAP3630_ST_UART4_MASK;
-			padconf = 0x0d2;
 			break;
 		}
 		uart->wk_mask = wk_mask;
-		uart->padconf = padconf;
 	} else if (cpu_is_omap24xx()) {
 		u32 wk_mask = 0;
 		u32 wk_en = PM_WKEN1, wk_st = PM_WKST1;
@@ -533,7 +512,6 @@  static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->wk_en = NULL;
 		uart->wk_st = NULL;
 		uart->wk_mask = 0;
-		uart->padconf = 0;
 	}
 
 	uart->irqflags |= IRQF_SHARED;
@@ -834,8 +812,7 @@  void __init omap_serial_init_port(struct omap_board_data *bdata)
 
 	console_unlock();
 
-	if ((cpu_is_omap34xx() && uart->padconf) ||
-	    (uart->wk_en && uart->wk_mask)) {
+	if (uart->oh->mux || (uart->wk_en && uart->wk_mask)) {
 		device_init_wakeup(&od->pdev.dev, true);
 		DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
 	}