From patchwork Tue Aug 9 14:10:31 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: manjugk manjugk X-Patchwork-Id: 1049672 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.4) with ESMTP id p79DspTR032535 for ; Tue, 9 Aug 2011 13:54:58 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751498Ab1HINy6 (ORCPT ); Tue, 9 Aug 2011 09:54:58 -0400 Received: from [117.192.76.145] ([117.192.76.145]:38478 "EHLO manju-desktop" rhost-flags-FAIL-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1750882Ab1HINy5 (ORCPT ); Tue, 9 Aug 2011 09:54:57 -0400 To: devicetree-discuss@lists.ozlabs.org Date: Tue, 09 Aug 2011 19:10:31 +0500 Subject: [RFC/PATCH 13/14] dt: omap3: add generic board file for dt support Envelope-To: devicetree-discuss@lists.ozlabs.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, grant.likely@secretlab.ca References: <1312897232-4792-1-git-send-email-manjugk@ti.com> CC: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, grant.likely@secretlab.ca Message-ID: <1312897232-4792-14-git-send-email-manjugk@ti.com> From: "G, Manjunath Kondaiah" Received: from manju-desktop (Citadel from userid 1000) by manju-desktop; Tue, 09 Aug 2011 19:10:36 +0500 X-Mailer: git-send-email 1.7.4.1 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter1.kernel.org [140.211.167.41]); Tue, 09 Aug 2011 13:54:58 +0000 (UTC) The generic board file is created and derived from beagle board file. The beagle board file is migrated to boot from flattened device tree and the cleanup of board specific file will happen in different stages. The changes here focus on minimal configuration to boot beagle board with dt enabled which provides basic platform for converting device drivers for using dt. Signed-off-by: G, Manjunath Kondaiah --- arch/arm/mach-omap2/Kconfig | 11 ++++ arch/arm/mach-omap2/Makefile | 1 + arch/arm/mach-omap2/board-omap3-dt.c | 93 +++++++++++++++++++++++++++++++ arch/arm/mach-omap2/board-omap3beagle.c | 13 ---- 4 files changed, 105 insertions(+), 13 deletions(-) create mode 100644 arch/arm/mach-omap2/board-omap3-dt.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 19d5891..6e1fe7c 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -302,6 +302,17 @@ config MACH_OMAP_3630SDP default y select OMAP_PACKAGE_CBP +config MACH_OMAP3_DT + bool "Generic OMAP3 board(FDT support)" + depends on ARCH_OMAP3 + select OMAP_PACKAGE_CBB + select USE_OF + + help + Support for generic TI OMAP3 boards using Flattened Device Tree. + Say Y here to enable OMAP3 device tree support + More information at Documentation/devicetree + config MACH_TI8168EVM bool "TI8168 Evaluation Module" depends on SOC_OMAPTI816X diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 39e3f61..0e363f2 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -187,6 +187,7 @@ obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o +obj-$(CONFIG_MACH_OMAP3_DT) += board-omap3-dt.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \ sdram-nokia.o diff --git a/arch/arm/mach-omap2/board-omap3-dt.c b/arch/arm/mach-omap2/board-omap3-dt.c new file mode 100644 index 0000000..4b76e19 --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3-dt.c @@ -0,0 +1,93 @@ +/* + * TI OMAP3 device tree board support + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include +#include + +#include "mux.h" +#include "timer-gp.h" +#include "common-board-devices.h" +#include "hsmmc.h" + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct twl4030_platform_data beagle_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ +}; + +static int __init omap3_beagle_i2c_init(void) +{ + omap3_pmic_init("twl4030", &beagle_twldata); + return 0; +} + +static void __init omap3_init_early(void) +{ + omap2_init_common_infrastructure(); + omap2_init_common_devices(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); +} + +static void __init omap3_init_irq(void) +{ + omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif +} + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#endif + +static struct of_device_id omap_dt_match_table[] __initdata = { + { .compatible = "ti,omap3-l4-core", }, + {} +}; + +static void __init omap3_init(void) +{ + omap3_beagle_i2c_init(); + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_serial_init(); + + of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); +} + +static const char *omap3_dt_match[] __initdata = { + "ti,omap3", + NULL +}; + +DT_MACHINE_START(OMAP3_DT, "TI OMAP3 (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3_init_early, + .init_irq = omap3_init_irq, + .init_machine = omap3_init, + .timer = &omap_timer, + .dt_compat = omap3_dt_match, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7905c8d..9ecb65d 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include @@ -422,9 +421,7 @@ static int __init omap3_beagle_i2c_init(void) /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); -#ifdef CONFIG_OF omap_register_i2c_bus(2, 100, NULL, 0); -#endif /* CONFIG_OF */ return 0; } @@ -564,10 +561,6 @@ static void __init beagle_opp_init(void) static void __init omap3_beagle_init(void) { -#ifdef CONFIG_OF - of_platform_prepare(NULL, NULL); -#endif /* CONFIG_OF */ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); omap3_beagle_i2c_init(); @@ -596,11 +589,6 @@ static void __init omap3_beagle_init(void) beagle_opp_init(); } -static const char *omap3_beagle_dt_match[] __initdata = { - "ti,omap3-beagle", - NULL -}; - MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ .boot_params = 0x80000100, @@ -610,5 +598,4 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .init_irq = omap3_beagle_init_irq, .init_machine = omap3_beagle_init, .timer = &omap_timer, - .dt_compat = omap3_beagle_dt_match, MACHINE_END