@@ -28,6 +28,8 @@
#include <plat/omap-pm.h>
#include <plat/common.h>
+#include "control.h"
+
static struct platform_device omap_display_device = {
.name = "omapdss",
.id = -1,
@@ -75,13 +77,51 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
+static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
+{
+ u32 enable_mask, enable_shift;
+ u32 pipd_mask, pipd_shift;
+ u32 reg;
+
+ if (dsi_id == 0) {
+ enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
+ enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
+ pipd_mask = OMAP4_DSI1_PIPD_MASK;
+ pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
+ } else if (dsi_id == 1) {
+ enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
+ enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
+ pipd_mask = OMAP4_DSI2_PIPD_MASK;
+ pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
+ } else {
+ return -ENODEV;
+ }
+
+ reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+
+ reg &= ~enable_mask;
+ reg &= ~pipd_mask;
+
+ reg |= (lanes << enable_shift) & enable_mask;
+ reg |= (lanes << pipd_shift) & pipd_mask;
+
+ omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
+
+ return 0;
+}
+
static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
+ if (cpu_is_omap44xx())
+ return omap4_dsi_mux_pads(dsi_id, lane_mask);
+
return 0;
}
static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
{
+ if (cpu_is_omap44xx())
+ omap4_dsi_mux_pads(dsi_id, 0);
}
int __init omap_display_init(struct omap_dss_board_info *board_data)
Implement dsi_mux_pads for OMAP4. On enable the function enables the DSI pins and disables pull down. On disable the function disables the pins and enables pull down. It is unclear from the TRM whether the pull down is active if the pins are disabled, so this implementation may leave the pins floating when the DSI device is disabled. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- arch/arm/mach-omap2/display.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 files changed, 40 insertions(+), 0 deletions(-)