@@ -90,7 +90,7 @@ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \
# OMAP voltage domains
ifeq ($(CONFIG_PM),y)
-voltagedomain-common := voltage.o
+voltagedomain-common := voltage.o vc.o
obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \
voltagedomains2xxx_data.o
obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \
new file mode 100644
@@ -0,0 +1,276 @@
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+
+#include <plat/cpu.h>
+
+#include "voltage.h"
+#include "vc.h"
+#include "prm-regbits-34xx.h"
+#include "prm-regbits-44xx.h"
+#include "prm44xx.h"
+
+/* Voltage scale and accessory APIs */
+int omap_vc_pre_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 *target_vsel, u8 *current_vsel)
+{
+ struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
+ struct omap_vdd_info *vdd = voltdm->vdd;
+ struct omap_volt_data *volt_data;
+ const struct omap_vc_common_data *vc_common;
+ const struct omap_vp_common_data *vp_common;
+ u32 vc_cmdval, vp_errgain_val;
+
+ vc_common = vc->vc_common;
+ vp_common = vdd->vp_data->vp_common;
+
+ /* Check if sufficient pmic info is available for this vdd */
+ if (!vdd->pmic_info) {
+ pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
+ __func__, voltdm->name);
+ return -EINVAL;
+ }
+
+ if (!vdd->pmic_info->uv_to_vsel) {
+ pr_err("%s: PMIC function to convert voltage in uV to"
+ "vsel not registered. Hence unable to scale voltage"
+ "for vdd_%s\n", __func__, voltdm->name);
+ return -ENODATA;
+ }
+
+ if (!vdd->read_reg || !vdd->write_reg) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return -EINVAL;
+ }
+
+ /* Get volt_data corresponding to target_volt */
+ volt_data = omap_voltage_get_voltdata(voltdm, target_volt);
+ if (IS_ERR(volt_data))
+ volt_data = NULL;
+
+ *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
+ *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
+
+ /* Setting the ON voltage to the new target voltage */
+ vc_cmdval = vdd->read_reg(vc->vc_common->prm_mod, vc->cmdval_reg);
+ vc_cmdval &= ~vc_common->cmd_on_mask;
+ vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift);
+ vdd->write_reg(vc_cmdval, vc->vc_common->prm_mod, vc->cmdval_reg);
+
+ /* Setting vp errorgain based on the voltage */
+ if (volt_data) {
+ vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod,
+ vdd->vp_data->vpconfig);
+ vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain;
+ vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask;
+ vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain <<
+ vp_common->vpconfig_errorgain_shift;
+ vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod,
+ vdd->vp_data->vpconfig);
+ }
+
+ return 0;
+}
+
+void omap_vc_post_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 target_vsel, u8 current_vsel)
+{
+ struct omap_vdd_info *vdd = voltdm->vdd;
+ u32 smps_steps = 0, smps_delay = 0;
+
+ smps_steps = abs(target_vsel - current_vsel);
+ /* SMPS slew rate / step size. 2us added as buffer. */
+ smps_delay = ((smps_steps * vdd->pmic_info->step_size) /
+ vdd->pmic_info->slew_rate) + 2;
+ udelay(smps_delay);
+
+ vdd->curr_volt = target_volt;
+}
+
+/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */
+int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm,
+ unsigned long target_volt)
+{
+ struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
+ struct omap_vdd_info *vdd = voltdm->vdd;
+ u32 loop_cnt = 0, retries_cnt = 0;
+ u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
+ u8 target_vsel, current_vsel;
+ int ret;
+
+ ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
+ if (ret)
+ return ret;
+
+ vc_valid = vc->vc_common->valid;
+ vc_bypass_val_reg = vc->vc_common->bypass_val_reg;
+ vc_bypass_value = (target_vsel << vc->vc_common->data_shift) |
+ (vdd->pmic_info->pmic_reg <<
+ vc->vc_common->regaddr_shift) |
+ (vdd->pmic_info->i2c_slave_addr <<
+ vc->vc_common->slaveaddr_shift);
+
+ vdd->write_reg(vc_bypass_value, vc->vc_common->prm_mod, vc_bypass_val_reg);
+ vdd->write_reg(vc_bypass_value | vc_valid, vc->vc_common->prm_mod,
+ vc_bypass_val_reg);
+
+ vc_bypass_value = vdd->read_reg(vc->vc_common->prm_mod, vc_bypass_val_reg);
+ /*
+ * Loop till the bypass command is acknowledged from the SMPS.
+ * NOTE: This is legacy code. The loop count and retry count needs
+ * to be revisited.
+ */
+ while (!(vc_bypass_value & vc_valid)) {
+ loop_cnt++;
+
+ if (retries_cnt > 10) {
+ pr_warning("%s: Retry count exceeded\n", __func__);
+ return -ETIMEDOUT;
+ }
+
+ if (loop_cnt > 50) {
+ retries_cnt++;
+ loop_cnt = 0;
+ udelay(10);
+ }
+ vc_bypass_value = vdd->read_reg(vc->vc_common->prm_mod,
+ vc_bypass_val_reg);
+ }
+
+ omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
+ return 0;
+}
+
+static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
+{
+ struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
+ struct omap_vdd_info *vdd = voltdm->vdd;
+
+ /*
+ * Voltage Manager FSM parameters init
+ * XXX This data should be passed in from the board file
+ */
+ vdd->write_reg(OMAP3_CLKSETUP, vc->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET);
+ vdd->write_reg(OMAP3_VOLTOFFSET, vc->vc_common->prm_mod,
+ OMAP3_PRM_VOLTOFFSET_OFFSET);
+ vdd->write_reg(OMAP3_VOLTSETUP2, vc->vc_common->prm_mod,
+ OMAP3_PRM_VOLTSETUP2_OFFSET);
+}
+
+static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
+ struct omap_vdd_info *vdd = voltdm->vdd;
+ static bool is_initialized;
+ u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
+ u32 vc_val;
+
+ if (is_initialized)
+ return;
+
+ /* Set up the on, inactive, retention and off voltage */
+ on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt);
+ onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
+ ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
+ off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
+ vc_val = ((on_vsel << vc->vc_common->cmd_on_shift) |
+ (onlp_vsel << vc->vc_common->cmd_onlp_shift) |
+ (ret_vsel << vc->vc_common->cmd_ret_shift) |
+ (off_vsel << vc->vc_common->cmd_off_shift));
+ vdd->write_reg(vc_val, vc->vc_common->prm_mod, vc->cmdval_reg);
+
+ /*
+ * Generic VC parameters init
+ * XXX This data should be abstracted out
+ */
+ vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vc->vc_common->prm_mod,
+ OMAP3_PRM_VC_CH_CONF_OFFSET);
+ vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vc->vc_common->prm_mod,
+ OMAP3_PRM_VC_I2C_CFG_OFFSET);
+
+ omap3_vfsm_init(voltdm);
+
+ is_initialized = true;
+}
+
+
+/* OMAP4 specific voltage init functions */
+static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
+ struct omap_vdd_info *vdd = voltdm->vdd;
+ static bool is_initialized;
+ u32 vc_val;
+
+ if (is_initialized)
+ return;
+
+ /* TODO: Configure setup times and CMD_VAL values*/
+
+ /*
+ * Generic VC parameters init
+ * XXX This data should be abstracted out
+ */
+ vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
+ OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
+ OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
+ vdd->write_reg(vc_val, vc->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
+
+ /* XXX These are magic numbers and do not belong! */
+ vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
+ vdd->write_reg(vc_val, vc->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+
+ is_initialized = true;
+}
+
+void __init omap_vc_init_channel(struct voltagedomain *voltdm)
+{
+ struct omap_vc_instance_data *vc = voltdm->vdd->vc_data;
+ struct omap_vdd_info *vdd = voltdm->vdd;
+ u32 vc_val;
+
+ if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
+ pr_err("%s: PMIC info requried to configure vc for"
+ "vdd_%s not populated.Hence cannot initialize vc\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ if (!vdd->read_reg || !vdd->write_reg) {
+ pr_err("%s: No read/write API for accessing vdd_%s regs\n",
+ __func__, voltdm->name);
+ return;
+ }
+
+ /* Set up the SMPS_SA(i2c slave address in VC */
+ vc_val = vdd->read_reg(vc->vc_common->prm_mod,
+ vc->vc_common->smps_sa_reg);
+ vc_val &= ~vc->smps_sa_mask;
+ vc_val |= vdd->pmic_info->i2c_slave_addr << vc->smps_sa_shift;
+ vdd->write_reg(vc_val, vc->vc_common->prm_mod,
+ vc->vc_common->smps_sa_reg);
+
+ /* Setup the VOLRA(pmic reg addr) in VC */
+ vc_val = vdd->read_reg(vc->vc_common->prm_mod,
+ vc->vc_common->smps_volra_reg);
+ vc_val &= ~vc->smps_volra_mask;
+ vc_val |= vdd->pmic_info->pmic_reg << vc->smps_volra_shift;
+ vdd->write_reg(vc_val, vc->vc_common->prm_mod,
+ vc->vc_common->smps_volra_reg);
+
+ /* Configure the setup times */
+ vc_val = vdd->read_reg(vc->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
+ vc_val &= ~vdd->vfsm->voltsetup_mask;
+ vc_val |= vdd->pmic_info->volt_setup_time <<
+ vdd->vfsm->voltsetup_shift;
+ vdd->write_reg(vc_val, vc->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
+
+ if (cpu_is_omap34xx())
+ omap3_vc_init_channel(voltdm);
+ else if (cpu_is_omap44xx())
+ omap4_vc_init_channel(voltdm);
+}
+
@@ -19,6 +19,8 @@
#include <linux/kernel.h>
+struct voltagedomain;
+
/**
* struct omap_vc_common_data - per-VC register/bitfield data
* @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register
@@ -81,5 +83,15 @@ extern struct omap_vc_instance_data omap4_vc_mpu_data;
extern struct omap_vc_instance_data omap4_vc_iva_data;
extern struct omap_vc_instance_data omap4_vc_core_data;
+void omap_vc_init_channel(struct voltagedomain *voltdm);
+int omap_vc_pre_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 *target_vsel, u8 *current_vsel);
+void omap_vc_post_scale(struct voltagedomain *voltdm,
+ unsigned long target_volt,
+ u8 target_vsel, u8 current_vsel);
+int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm,
+ unsigned long target_volt);
+
#endif
@@ -293,136 +293,6 @@ static void __init vdd_debugfs_init(struct voltagedomain *voltdm)
&nom_volt_debug_fops);
}
-/* Voltage scale and accessory APIs */
-static int _pre_volt_scale(struct voltagedomain *voltdm,
- unsigned long target_volt, u8 *target_vsel, u8 *current_vsel)
-{
- struct omap_vdd_info *vdd = voltdm->vdd;
- struct omap_volt_data *volt_data;
- const struct omap_vc_common_data *vc_common;
- const struct omap_vp_common_data *vp_common;
- u32 vc_cmdval, vp_errgain_val;
-
- vc_common = vdd->vc_data->vc_common;
- vp_common = vdd->vp_data->vp_common;
-
- /* Check if suffiecient pmic info is available for this vdd */
- if (!vdd->pmic_info) {
- pr_err("%s: Insufficient pmic info to scale the vdd_%s\n",
- __func__, voltdm->name);
- return -EINVAL;
- }
-
- if (!vdd->pmic_info->uv_to_vsel) {
- pr_err("%s: PMIC function to convert voltage in uV to"
- "vsel not registered. Hence unable to scale voltage"
- "for vdd_%s\n", __func__, voltdm->name);
- return -ENODATA;
- }
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, voltdm->name);
- return -EINVAL;
- }
-
- /* Get volt_data corresponding to target_volt */
- volt_data = omap_voltage_get_voltdata(voltdm, target_volt);
- if (IS_ERR(volt_data))
- volt_data = NULL;
-
- *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt);
- *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage);
-
- /* Setting the ON voltage to the new target voltage */
- vc_cmdval = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
- vc_cmdval &= ~vc_common->cmd_on_mask;
- vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift);
- vdd->write_reg(vc_cmdval, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
-
- /* Setting vp errorgain based on the voltage */
- if (volt_data) {
- vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod,
- vdd->vp_data->vpconfig);
- vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain;
- vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask;
- vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain <<
- vp_common->vpconfig_errorgain_shift;
- vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod,
- vdd->vp_data->vpconfig);
- }
-
- return 0;
-}
-
-static void _post_volt_scale(struct voltagedomain *voltdm,
- unsigned long target_volt, u8 target_vsel, u8 current_vsel)
-{
- struct omap_vdd_info *vdd = voltdm->vdd;
- u32 smps_steps = 0, smps_delay = 0;
-
- smps_steps = abs(target_vsel - current_vsel);
- /* SMPS slew rate / step size. 2us added as buffer. */
- smps_delay = ((smps_steps * vdd->pmic_info->step_size) /
- vdd->pmic_info->slew_rate) + 2;
- udelay(smps_delay);
-
- vdd->curr_volt = target_volt;
-}
-
-/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */
-static int vc_bypass_scale_voltage(struct voltagedomain *voltdm,
- unsigned long target_volt)
-{
- struct omap_vdd_info *vdd = voltdm->vdd;
- u32 loop_cnt = 0, retries_cnt = 0;
- u32 vc_valid, vc_bypass_val_reg, vc_bypass_value;
- u8 target_vsel, current_vsel;
- int ret;
-
- ret = _pre_volt_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
- if (ret)
- return ret;
-
- vc_valid = vdd->vc_data->vc_common->valid;
- vc_bypass_val_reg = vdd->vc_data->vc_common->bypass_val_reg;
- vc_bypass_value = (target_vsel << vdd->vc_data->vc_common->data_shift) |
- (vdd->pmic_info->pmic_reg <<
- vdd->vc_data->vc_common->regaddr_shift) |
- (vdd->pmic_info->i2c_slave_addr <<
- vdd->vc_data->vc_common->slaveaddr_shift);
-
- vdd->write_reg(vc_bypass_value, vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg);
- vdd->write_reg(vc_bypass_value | vc_valid, vdd->vc_data->vc_common->prm_mod,
- vc_bypass_val_reg);
-
- vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg);
- /*
- * Loop till the bypass command is acknowledged from the SMPS.
- * NOTE: This is legacy code. The loop count and retry count needs
- * to be revisited.
- */
- while (!(vc_bypass_value & vc_valid)) {
- loop_cnt++;
-
- if (retries_cnt > 10) {
- pr_warning("%s: Retry count exceeded\n", __func__);
- return -ETIMEDOUT;
- }
-
- if (loop_cnt > 50) {
- retries_cnt++;
- loop_cnt = 0;
- udelay(10);
- }
- vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
- vc_bypass_val_reg);
- }
-
- _post_volt_scale(voltdm, target_volt, target_vsel, current_vsel);
- return 0;
-}
-
/* VP force update method of voltage scaling */
static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm,
unsigned long target_volt)
@@ -432,7 +302,7 @@ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm,
u8 target_vsel, current_vsel;
int ret, timeout = 0;
- ret = _pre_volt_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
+ ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel);
if (ret)
return ret;
@@ -485,7 +355,7 @@ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm,
"TRANXDONE never got set after the voltage update\n",
__func__, voltdm->name);
- _post_volt_scale(voltdm, target_volt, target_vsel, current_vsel);
+ omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel);
/*
* Disable TransactionDone interrupt , clear all status, clear
@@ -517,132 +387,6 @@ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm,
return 0;
}
-static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd = voltdm->vdd;
-
- /*
- * Voltage Manager FSM parameters init
- * XXX This data should be passed in from the board file
- */
- vdd->write_reg(OMAP3_CLKSETUP, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET);
- vdd->write_reg(OMAP3_VOLTOFFSET, vdd->vc_data->vc_common->prm_mod,
- OMAP3_PRM_VOLTOFFSET_OFFSET);
- vdd->write_reg(OMAP3_VOLTSETUP2, vdd->vc_data->vc_common->prm_mod,
- OMAP3_PRM_VOLTSETUP2_OFFSET);
-}
-
-static void __init omap3_vc_init(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd = voltdm->vdd;
- static bool is_initialized;
- u8 on_vsel, onlp_vsel, ret_vsel, off_vsel;
- u32 vc_val;
-
- if (is_initialized)
- return;
-
- /* Set up the on, inactive, retention and off voltage */
- on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt);
- onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt);
- ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt);
- off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt);
- vc_val = ((on_vsel << vdd->vc_data->vc_common->cmd_on_shift) |
- (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) |
- (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) |
- (off_vsel << vdd->vc_data->vc_common->cmd_off_shift));
- vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg);
-
- /*
- * Generic VC parameters init
- * XXX This data should be abstracted out
- */
- vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vdd->vc_data->vc_common->prm_mod,
- OMAP3_PRM_VC_CH_CONF_OFFSET);
- vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vdd->vc_data->vc_common->prm_mod,
- OMAP3_PRM_VC_I2C_CFG_OFFSET);
-
- omap3_vfsm_init(voltdm);
-
- is_initialized = true;
-}
-
-
-/* OMAP4 specific voltage init functions */
-static void __init omap4_vc_init(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd = voltdm->vdd;
- static bool is_initialized;
- u32 vc_val;
-
- if (is_initialized)
- return;
-
- /* TODO: Configure setup times and CMD_VAL values*/
-
- /*
- * Generic VC parameters init
- * XXX This data should be abstracted out
- */
- vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK |
- OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK |
- OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK);
- vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET);
-
- /* XXX These are magic numbers and do not belong! */
- vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
- vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
-
- is_initialized = true;
-}
-
-static void __init omap_vc_init(struct voltagedomain *voltdm)
-{
- struct omap_vdd_info *vdd = voltdm->vdd;
- u32 vc_val;
-
- if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) {
- pr_err("%s: PMIC info requried to configure vc for"
- "vdd_%s not populated.Hence cannot initialize vc\n",
- __func__, voltdm->name);
- return;
- }
-
- if (!vdd->read_reg || !vdd->write_reg) {
- pr_err("%s: No read/write API for accessing vdd_%s regs\n",
- __func__, voltdm->name);
- return;
- }
-
- /* Set up the SMPS_SA(i2c slave address in VC */
- vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
- vdd->vc_data->vc_common->smps_sa_reg);
- vc_val &= ~vdd->vc_data->smps_sa_mask;
- vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift;
- vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod,
- vdd->vc_data->vc_common->smps_sa_reg);
-
- /* Setup the VOLRA(pmic reg addr) in VC */
- vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod,
- vdd->vc_data->vc_common->smps_volra_reg);
- vc_val &= ~vdd->vc_data->smps_volra_mask;
- vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift;
- vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod,
- vdd->vc_data->vc_common->smps_volra_reg);
-
- /* Configure the setup times */
- vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
- vc_val &= ~vdd->vfsm->voltsetup_mask;
- vc_val |= vdd->pmic_info->volt_setup_time <<
- vdd->vfsm->voltsetup_shift;
- vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg);
-
- if (cpu_is_omap34xx())
- omap3_vc_init(voltdm);
- else if (cpu_is_omap44xx())
- omap4_vc_init(voltdm);
-}
-
static int __init omap_vdd_data_configure(struct voltagedomain *voltdm)
{
struct omap_vdd_info *vdd = voltdm->vdd;
@@ -1025,7 +769,7 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm,
vdd->volt_scale = vp_forceupdate_scale_voltage;
return;
case VOLTSCALE_VCBYPASS:
- vdd->volt_scale = vc_bypass_scale_voltage;
+ vdd->volt_scale = omap_vc_bypass_scale_voltage;
return;
default:
pr_warning("%s: Trying to change the method of voltage scaling"
@@ -1061,7 +805,7 @@ int __init omap_voltage_late_init(void)
if (voltdm->vdd) {
if (omap_vdd_data_configure(voltdm))
continue;
- omap_vc_init(voltdm);
+ omap_vc_init_channel(voltdm);
vp_init(voltdm);
vdd_debugfs_init(voltdm);
}
As part of the voltage layer cleanup, split out VC specific code into a dedicated VC layer. This patch primarily just moves VC code from voltage.c into vc.c, and adds prototypes to vc.h. No functional changes. For readability, each function was given a local 'vc' pointer: struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; and a global replace of s/vdd->vc_data/vc/ was done. Also vc_init was renamed to vc_init_channel to reflect that this is per-VC channel initializtion. Signed-off-by: Kevin Hilman <khilman@ti.com> --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/vc.c | 276 +++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/vc.h | 12 ++ arch/arm/mach-omap2/voltage.c | 264 +-------------------------------------- 4 files changed, 293 insertions(+), 261 deletions(-) create mode 100644 arch/arm/mach-omap2/vc.c