diff mbox

[05/12] OMAP: DSS2: HDMI: remove edid parsing

Message ID 1314797003-17638-6-git-send-email-tomi.valkeinen@ti.com (mailing list archive)
State New, archived
Delegated to: Tomi Valkeinen
Headers show

Commit Message

Tomi Valkeinen Aug. 31, 2011, 1:23 p.m. UTC 
OMAPFB handles EDID parsing now, using the common helper functions in
fbdev. We can remove the EDID parsing from HDMI driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/hdmi.c             |  137 ----------------------------
 drivers/video/omap2/dss/hdmi_omap4_panel.c |    8 +--
 2 files changed, 1 insertions(+), 144 deletions(-)
diff mbox

Patch

diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 5e66cb8..b5aca64 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -53,9 +53,6 @@  static struct {
 	void __iomem *base_wp;	/* HDMI wrapper */
 	int code;
 	int mode;
-	u8 edid[HDMI_EDID_MAX_LENGTH];
-	u8 edid_set;
-	bool custom_set;
 	struct hdmi_config cfg;
 
 	struct clk *sys_clk;
@@ -146,8 +143,6 @@  static const int code_vesa[85] = {
 	-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
 	-1, 27, 28, -1, 33};
 
-static const u8 edid_header[8] = {0x0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x0};
-
 static inline void hdmi_write_reg(const struct hdmi_reg idx, u32 val)
 {
 	__raw_writel(val, hdmi.base_wp + idx.idx);
@@ -561,129 +556,6 @@  static struct hdmi_cm hdmi_get_code(struct omap_video_timings *timing)
 	return cm;
 }
 
-static void get_horz_vert_timing_info(int current_descriptor_addrs, u8 *edid ,
-		struct omap_video_timings *timings)
-{
-	/* X and Y resolution */
-	timings->x_res = (((edid[current_descriptor_addrs + 4] & 0xF0) << 4) |
-			 edid[current_descriptor_addrs + 2]);
-	timings->y_res = (((edid[current_descriptor_addrs + 7] & 0xF0) << 4) |
-			 edid[current_descriptor_addrs + 5]);
-
-	timings->pixel_clock = ((edid[current_descriptor_addrs + 1] << 8) |
-				edid[current_descriptor_addrs]);
-
-	timings->pixel_clock = 10 * timings->pixel_clock;
-
-	/* HORIZONTAL FRONT PORCH */
-	timings->hfp = edid[current_descriptor_addrs + 8] |
-			((edid[current_descriptor_addrs + 11] & 0xc0) << 2);
-	/* HORIZONTAL SYNC WIDTH */
-	timings->hsw = edid[current_descriptor_addrs + 9] |
-			((edid[current_descriptor_addrs + 11] & 0x30) << 4);
-	/* HORIZONTAL BACK PORCH */
-	timings->hbp = (((edid[current_descriptor_addrs + 4] & 0x0F) << 8) |
-			edid[current_descriptor_addrs + 3]) -
-			(timings->hfp + timings->hsw);
-	/* VERTICAL FRONT PORCH */
-	timings->vfp = ((edid[current_descriptor_addrs + 10] & 0xF0) >> 4) |
-			((edid[current_descriptor_addrs + 11] & 0x0f) << 2);
-	/* VERTICAL SYNC WIDTH */
-	timings->vsw = (edid[current_descriptor_addrs + 10] & 0x0F) |
-			((edid[current_descriptor_addrs + 11] & 0x03) << 4);
-	/* VERTICAL BACK PORCH */
-	timings->vbp = (((edid[current_descriptor_addrs + 7] & 0x0F) << 8) |
-			edid[current_descriptor_addrs + 6]) -
-			(timings->vfp + timings->vsw);
-
-}
-
-/* Description : This function gets the resolution information from EDID */
-static void get_edid_timing_data(u8 *edid)
-{
-	u8 count;
-	u16 current_descriptor_addrs;
-	struct hdmi_cm cm;
-	struct omap_video_timings edid_timings;
-
-	/* search block 0, there are 4 DTDs arranged in priority order */
-	for (count = 0; count < EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR; count++) {
-		current_descriptor_addrs =
-			EDID_DESCRIPTOR_BLOCK0_ADDRESS +
-			count * EDID_TIMING_DESCRIPTOR_SIZE;
-		get_horz_vert_timing_info(current_descriptor_addrs,
-				edid, &edid_timings);
-		cm = hdmi_get_code(&edid_timings);
-		DSSDBG("Block0[%d] value matches code = %d , mode = %d\n",
-			count, cm.code, cm.mode);
-		if (cm.code == -1) {
-			continue;
-		} else {
-			hdmi.code = cm.code;
-			hdmi.mode = cm.mode;
-			DSSDBG("code = %d , mode = %d\n",
-				hdmi.code, hdmi.mode);
-			return;
-		}
-	}
-	if (edid[0x7e] != 0x00) {
-		for (count = 0; count < EDID_SIZE_BLOCK1_TIMING_DESCRIPTOR;
-			count++) {
-			current_descriptor_addrs =
-			EDID_DESCRIPTOR_BLOCK1_ADDRESS +
-			count * EDID_TIMING_DESCRIPTOR_SIZE;
-			get_horz_vert_timing_info(current_descriptor_addrs,
-						edid, &edid_timings);
-			cm = hdmi_get_code(&edid_timings);
-			DSSDBG("Block1[%d] value matches code = %d, mode = %d",
-				count, cm.code, cm.mode);
-			if (cm.code == -1) {
-				continue;
-			} else {
-				hdmi.code = cm.code;
-				hdmi.mode = cm.mode;
-				DSSDBG("code = %d , mode = %d\n",
-					hdmi.code, hdmi.mode);
-				return;
-			}
-		}
-	}
-
-	DSSINFO("no valid timing found , falling back to VGA\n");
-	hdmi.code = 4; /* setting default value of 640 480 VGA */
-	hdmi.mode = HDMI_DVI;
-}
-
-static void hdmi_read_edid(struct omap_video_timings *dp)
-{
-	int ret = 0, code;
-
-	memset(hdmi.edid, 0, HDMI_EDID_MAX_LENGTH);
-
-	if (!hdmi.edid_set)
-		ret = read_edid(hdmi.edid, HDMI_EDID_MAX_LENGTH);
-
-	if (ret > 0) {
-		if (!memcmp(hdmi.edid, edid_header, sizeof(edid_header))) {
-			/* search for timings of default resolution */
-			get_edid_timing_data(hdmi.edid);
-			hdmi.edid_set = true;
-		}
-	} else {
-		DSSWARN("failed to read E-EDID\n");
-	}
-
-	if (!hdmi.edid_set) {
-		DSSINFO("fallback to VGA\n");
-		hdmi.code = 4; /* setting default value of 640 480 VGA */
-		hdmi.mode = HDMI_DVI;
-	}
-
-	code = get_timings_index();
-
-	*dp = cea_vesa_timings[code].timings;
-}
-
 static void hdmi_core_init(struct hdmi_core_video_config *video_cfg,
 			struct hdmi_core_infoframe_avi *avi_cfg,
 			struct hdmi_core_packet_enable_repeat *repeat_cfg)
@@ -1138,12 +1010,7 @@  static int hdmi_power_on(struct omap_dss_device *dssdev)
 		dssdev->panel.timings.x_res,
 		dssdev->panel.timings.y_res);
 
-	if (!hdmi.custom_set) {
-		DSSDBG("Read EDID as no EDID is not set on poweron\n");
-		hdmi_read_edid(p);
-	}
 	code = get_timings_index();
-	dssdev->panel.timings = cea_vesa_timings[code].timings;
 	update_hdmi_timings(&hdmi.cfg, p, code);
 
 	phy = p->pixel_clock;
@@ -1205,8 +1072,6 @@  static void hdmi_power_off(struct omap_dss_device *dssdev)
 	hdmi_phy_off();
 	hdmi_set_pll_pwr(HDMI_PLLPWRCMD_ALLOFF);
 	hdmi_runtime_put();
-
-	hdmi.edid_set = 0;
 }
 
 int omapdss_hdmi_display_check_timing(struct omap_dss_device *dssdev,
@@ -1228,8 +1093,6 @@  void omapdss_hdmi_display_set_timing(struct omap_dss_device *dssdev)
 {
 	struct hdmi_cm cm;
 
-	hdmi.custom_set = 1;
-
 	cm = hdmi_get_code(&dssdev->panel.timings);
 	hdmi.code = cm.code;
 	hdmi.mode = cm.mode;
diff --git a/drivers/video/omap2/dss/hdmi_omap4_panel.c b/drivers/video/omap2/dss/hdmi_omap4_panel.c
index 7adaf7a..5e314e8 100644
--- a/drivers/video/omap2/dss/hdmi_omap4_panel.c
+++ b/drivers/video/omap2/dss/hdmi_omap4_panel.c
@@ -40,13 +40,7 @@  static int hdmi_panel_probe(struct omap_dss_device *dssdev)
 	dssdev->panel.config = OMAP_DSS_LCD_TFT |
 			OMAP_DSS_LCD_IVS | OMAP_DSS_LCD_IHS;
 
-	/*
-	 * Initialize the timings to 640 * 480
-	 * This is only for framebuffer update not for TV timing setting
-	 * Setting TV timing will be done only on enable
-	 */
-	dssdev->panel.timings.x_res = 640;
-	dssdev->panel.timings.y_res = 480;
+	dssdev->panel.timings = (struct omap_video_timings){640, 480, 25175, 96, 16, 48, 2 , 11, 31};
 
 	DSSDBG("hdmi_panel_probe x_res= %d y_res = %d\n",
 		dssdev->panel.timings.x_res,