diff mbox

[v6,19/25] gpio/omap: cleanup prepare_for_idle and resume_after_idle

Message ID 1314798161-19523-20-git-send-email-tarun.kanti@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Tarun Kanti DebBarma Aug. 31, 2011, 1:42 p.m. UTC 
Cleanup  omap2_gpio_prepare_for_idle() and omap2_gpio_resume_after_idle()
by moving most of the stuff to *_runtime_suspend() and *_runtime_resume().

Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Charulatha V <charu@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
 drivers/gpio/gpio-omap.c |  234 ++++++++++++++++++++++++---------------------
 1 files changed, 125 insertions(+), 109 deletions(-)

Comments

Kevin Hilman Sept. 6, 2011, 11:53 p.m. UTC | #1 
Tarun Kanti DebBarma <tarun.kanti@ti.com> writes:

> Cleanup  omap2_gpio_prepare_for_idle() and omap2_gpio_resume_after_idle()
> by moving most of the stuff to *_runtime_suspend() and *_runtime_resume().

Why? 

(I know the answer, but it should be in the changelog.)

> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
> Signed-off-by: Charulatha V <charu@ti.com>
> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Also, as pointed out in an earlier patch, now that this is moved out of
the idle path, where interrupts were known to be disabled, the register
accesses in the runtime PM callbacks need to be protected by the
spinlock just like they are in other parts of the driver.

[...]

> @@ -1305,9 +1316,14 @@ static void omap_gpio_restore_context(struct gpio_bank *bank)
>  				bank->base + bank->regs->fallingdetect);
>  	__raw_writel(bank->context.dataout, bank->base + bank->regs->dataout);
>  }
> +#else
> +#define omap_gpio_runtime_suspend NULL
> +#define omap_gpio_runtime_resume NULL
>  #endif
>  
>  static const struct dev_pm_ops gpio_pm_ops = {
> +	.runtime_suspend	= omap_gpio_runtime_suspend,
> +	.runtime_resume		= omap_gpio_runtime_resume,

Please use SET_RUNTIME_PM_OPS() (see <linux/pm.h.)

>  	.suspend		= omap_gpio_suspend,
>  	.resume			= omap_gpio_resume,
>  };

Kevin
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Tarun Kanti DebBarma Sept. 7, 2011, 5:17 a.m. UTC | #2 
On Wed, Sep 7, 2011 at 5:23 AM, Kevin Hilman <khilman@ti.com> wrote:
> Tarun Kanti DebBarma <tarun.kanti@ti.com> writes:
>
>> Cleanup  omap2_gpio_prepare_for_idle() and omap2_gpio_resume_after_idle()
>> by moving most of the stuff to *_runtime_suspend() and *_runtime_resume().
>
> Why?
>
> (I know the answer, but it should be in the changelog.)
Ok.

>
>> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
>> Signed-off-by: Charulatha V <charu@ti.com>
>> Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
>
> Also, as pointed out in an earlier patch, now that this is moved out of
> the idle path, where interrupts were known to be disabled, the register
> accesses in the runtime PM callbacks need to be protected by the
> spinlock just like they are in other parts of the driver.
Ok.

>
> [...]
>
>> @@ -1305,9 +1316,14 @@ static void omap_gpio_restore_context(struct gpio_bank *bank)
>>                               bank->base + bank->regs->fallingdetect);
>>       __raw_writel(bank->context.dataout, bank->base + bank->regs->dataout);
>>  }
>> +#else
>> +#define omap_gpio_runtime_suspend NULL
>> +#define omap_gpio_runtime_resume NULL
>>  #endif
>>
>>  static const struct dev_pm_ops gpio_pm_ops = {
>> +     .runtime_suspend        = omap_gpio_runtime_suspend,
>> +     .runtime_resume         = omap_gpio_runtime_resume,
>
> Please use SET_RUNTIME_PM_OPS() (see <linux/pm.h.)
Sure.

>
>>       .suspend                = omap_gpio_suspend,
>>       .resume                 = omap_gpio_resume,
>>  };
>
> Kevin
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index a267a30..9d68b15 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1126,142 +1126,153 @@  static int omap_gpio_resume(struct device *dev)
 static void omap_gpio_save_context(struct gpio_bank *bank);
 static void omap_gpio_restore_context(struct gpio_bank *bank);
 
-void omap2_gpio_prepare_for_idle(int off_mode)
+static int omap_gpio_runtime_suspend(struct device *dev)
 {
-	struct gpio_bank *bank;
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_bank *bank = platform_get_drvdata(pdev);
+	u32 l1 = 0, l2 = 0;
+	int j;
 
-	list_for_each_entry(bank, &omap_gpio_list, node) {
-		u32 l1 = 0, l2 = 0;
-		int j;
+	for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
+		clk_disable(bank->dbck);
 
-		if (!bank->loses_context)
-			continue;
+	/*
+	 * If going to OFF, remove triggering for all
+	 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
+	 * generated.  See OMAP2420 Errata item 1.101.
+	 */
+	if (!(bank->enabled_non_wakeup_gpios))
+		goto save_gpio_context;
 
-		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
-			clk_disable(bank->dbck);
+	bank->saved_datain = __raw_readl(bank->base +
+						bank->regs->datain);
+	l1 = __raw_readl(bank->base + bank->regs->fallingdetect);
+	l2 = __raw_readl(bank->base + bank->regs->risingdetect);
 
-		if (!off_mode)
-			continue;
+	bank->saved_fallingdetect = l1;
+	bank->saved_risingdetect = l2;
+	l1 &= ~bank->enabled_non_wakeup_gpios;
+	l2 &= ~bank->enabled_non_wakeup_gpios;
 
-		if (IS_ERR_VALUE(pm_runtime_put_sync_suspend(bank->dev) < 0))
-			dev_err(bank->dev, "%s: GPIO bank %d "
-					"pm_runtime_put_sync_suspend failed\n",
-					__func__, bank->id);
+	__raw_writel(l1, bank->base + bank->regs->fallingdetect);
+	__raw_writel(l2, bank->base + bank->regs->risingdetect);
+
+save_gpio_context:
+	if (bank->get_context_loss_count)
+		bank->context_loss_count =
+				bank->get_context_loss_count(bank->dev);
+	omap_gpio_save_context(bank);
 
-		/* If going to OFF, remove triggering for all
-		 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
-		 * generated.  See OMAP2420 Errata item 1.101. */
-		if (!(bank->enabled_non_wakeup_gpios))
-			goto save_gpio_context;
+	return 0;
+}
+
+static int omap_gpio_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct gpio_bank *bank = platform_get_drvdata(pdev);
+	u32 context_lost_cnt_after;
+	u32 l = 0, gen, gen0, gen1;
+	int j;
+
+	for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
+		clk_enable(bank->dbck);
 
-		bank->saved_datain = __raw_readl(bank->base +
-							bank->regs->datain);
-		l1 = __raw_readl(bank->base + bank->regs->fallingdetect);
-		l2 = __raw_readl(bank->base + bank->regs->risingdetect);
+	if (bank->get_context_loss_count) {
+		context_lost_cnt_after =
+			bank->get_context_loss_count(bank->dev);
+		if (context_lost_cnt_after != bank->context_loss_count ||
+						!context_lost_cnt_after)
+			omap_gpio_restore_context(bank);
+		else
+			return 0;
+	}
 
-		bank->saved_fallingdetect = l1;
-		bank->saved_risingdetect = l2;
-		l1 &= ~bank->enabled_non_wakeup_gpios;
-		l2 &= ~bank->enabled_non_wakeup_gpios;
+	if (!(bank->enabled_non_wakeup_gpios))
+		return 0;
 
-		__raw_writel(l1, bank->base + bank->regs->fallingdetect);
-		__raw_writel(l2, bank->base + bank->regs->risingdetect);
+	__raw_writel(bank->saved_fallingdetect,
+			bank->base + bank->regs->fallingdetect);
+	__raw_writel(bank->saved_risingdetect,
+			bank->base + bank->regs->risingdetect);
+	l = __raw_readl(bank->base + bank->regs->datain);
 
-save_gpio_context:
-		if (bank->get_context_loss_count)
-			bank->context_loss_count =
-				bank->get_context_loss_count(bank->dev);
+	/*
+	 * Check if any of the non-wakeup interrupt GPIOs have changed
+	 * state.  If so, generate an IRQ by software.  This is
+	 * horribly racy, but it's the best we can do to work around
+	 * this silicon bug.
+	 */
+	l ^= bank->saved_datain;
+	l &= bank->enabled_non_wakeup_gpios;
 
-		omap_gpio_save_context(bank);
+	/*
+	 * No need to generate IRQs for the rising edge for gpio IRQs
+	 * configured with falling edge only; and vice versa.
+	 */
+	gen0 = l & bank->saved_fallingdetect;
+	gen0 &= bank->saved_datain;
+	gen1 = l & bank->saved_risingdetect;
+	gen1 &= ~(bank->saved_datain);
+
+	/* FIXME: Consider GPIO IRQs with level detections properly! */
+	gen = l & (~(bank->saved_fallingdetect) & ~(bank->saved_risingdetect));
+	/* Consider all GPIO IRQs needed to be updated */
+	gen |= gen0 | gen1;
+
+	if (gen) {
+		u32 old0, old1;
+
+		old0 = __raw_readl(bank->base + bank->regs->leveldetect0);
+		old1 = __raw_readl(bank->base + bank->regs->leveldetect1);
+
+		__raw_writel(old0, bank->base + bank->regs->leveldetect0);
+		__raw_writel(old1, bank->base + bank->regs->leveldetect1);
+		if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+			old0 |= gen;
+			old1 |= gen;
+		}
+
+		if (cpu_is_omap44xx()) {
+			old0 |= l;
+			old1 |= l;
+		}
+		__raw_writel(old0, bank->base + bank->regs->leveldetect0);
+		__raw_writel(old1, bank->base + bank->regs->leveldetect1);
 	}
+
+	return 0;
 }
 
-void omap2_gpio_resume_after_idle(void)
+void omap2_gpio_prepare_for_idle(int off_mode)
 {
 	struct gpio_bank *bank;
 
-	list_for_each_entry(bank, &omap_gpio_list, node) {
-		u32 context_lost_cnt_after;
-		u32 l = 0, gen, gen0, gen1;
-		int j;
+	if (!off_mode)
+		return;
 
-		if (!bank->loses_context)
+	list_for_each_entry(bank, &omap_gpio_list, node) {
+		if (!bank->mod_usage || !bank->loses_context)
 			continue;
 
-		if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0))
+		if (IS_ERR_VALUE(pm_runtime_put_sync_suspend(bank->dev) < 0))
 			dev_err(bank->dev, "%s: GPIO bank %d "
-					"pm_runtime_get_sync failed\n",
+					"pm_runtime_put_sync_suspend failed\n",
 					__func__, bank->id);
+	}
+}
 
-		for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
-			clk_enable(bank->dbck);
-
-		if (bank->get_context_loss_count) {
-			context_lost_cnt_after =
-				bank->get_context_loss_count(bank->dev);
-			if (context_lost_cnt_after != bank->context_loss_count
-				|| !context_lost_cnt_after)
-				omap_gpio_restore_context(bank);
-		}
+void omap2_gpio_resume_after_idle(void)
+{
+	struct gpio_bank *bank;
 
-		if (!(bank->enabled_non_wakeup_gpios))
+	list_for_each_entry(bank, &omap_gpio_list, node) {
+		if (!bank->mod_usage || !bank->loses_context)
 			continue;
 
-		__raw_writel(bank->saved_fallingdetect,
-				bank->base + bank->regs->fallingdetect);
-		__raw_writel(bank->saved_risingdetect,
-				bank->base + bank->regs->risingdetect);
-		l = __raw_readl(bank->base + bank->regs->datain);
-
-		/* Check if any of the non-wakeup interrupt GPIOs have changed
-		 * state.  If so, generate an IRQ by software.  This is
-		 * horribly racy, but it's the best we can do to work around
-		 * this silicon bug. */
-		l ^= bank->saved_datain;
-		l &= bank->enabled_non_wakeup_gpios;
-
-		/*
-		 * No need to generate IRQs for the rising edge for gpio IRQs
-		 * configured with falling edge only; and vice versa.
-		 */
-		gen0 = l & bank->saved_fallingdetect;
-		gen0 &= bank->saved_datain;
-
-		gen1 = l & bank->saved_risingdetect;
-		gen1 &= ~(bank->saved_datain);
-
-		/* FIXME: Consider GPIO IRQs with level detections properly! */
-		gen = l & (~(bank->saved_fallingdetect) &
-				~(bank->saved_risingdetect));
-		/* Consider all GPIO IRQs needed to be updated */
-		gen |= gen0 | gen1;
-
-		if (gen) {
-			u32 old0, old1;
-
-			old0 = __raw_readl(bank->base +
-						bank->regs->leveldetect0);
-			old1 = __raw_readl(bank->base +
-						bank->regs->leveldetect1);
-
-			__raw_writel(old0, bank->base +
-						bank->regs->leveldetect0);
-			__raw_writel(old1, bank->base +
-						bank->regs->leveldetect1);
-			if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
-				old0 |= gen;
-				old1 |= gen;
-			}
-
-			if (cpu_is_omap44xx()) {
-				old0 |= l;
-				old1 |= l;
-			}
-			__raw_writel(old0, bank->base +
-						bank->regs->leveldetect0);
-			__raw_writel(old1, bank->base +
-						bank->regs->leveldetect1);
-		}
+		if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0))
+			dev_err(bank->dev, "%s: GPIO bank %d "
+					"pm_runtime_get_sync failed\n",
+					__func__, bank->id);
 	}
 }
 
@@ -1305,9 +1316,14 @@  static void omap_gpio_restore_context(struct gpio_bank *bank)
 				bank->base + bank->regs->fallingdetect);
 	__raw_writel(bank->context.dataout, bank->base + bank->regs->dataout);
 }
+#else
+#define omap_gpio_runtime_suspend NULL
+#define omap_gpio_runtime_resume NULL
 #endif
 
 static const struct dev_pm_ops gpio_pm_ops = {
+	.runtime_suspend	= omap_gpio_runtime_suspend,
+	.runtime_resume		= omap_gpio_runtime_resume,
 	.suspend		= omap_gpio_suspend,
 	.resume			= omap_gpio_resume,
 };