From patchwork Wed Sep 7 12:53:28 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Govindraj.R" X-Patchwork-Id: 1127172 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter2.kernel.org (8.14.4/8.14.4) with ESMTP id p87G3exn006429 for ; Wed, 7 Sep 2011 16:03:40 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754318Ab1IGQBd (ORCPT ); Wed, 7 Sep 2011 12:01:33 -0400 Received: from devils.ext.ti.com ([198.47.26.153]:48346 "EHLO devils.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754582Ab1IGQBN (ORCPT ); Wed, 7 Sep 2011 12:01:13 -0400 Received: from dbdp20.itg.ti.com ([172.24.170.38]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id p87Crq9N010053 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Wed, 7 Sep 2011 07:53:54 -0500 Received: from dbde70.ent.ti.com (localhost [127.0.0.1]) by dbdp20.itg.ti.com (8.13.8/8.13.8) with ESMTP id p87Crohq026936; Wed, 7 Sep 2011 18:23:51 +0530 (IST) Received: from dbdp31.itg.ti.com (172.24.170.98) by DBDE70.ent.ti.com (172.24.170.148) with Microsoft SMTP Server id 8.3.106.1; Wed, 7 Sep 2011 18:23:51 +0530 Received: from ula0131859.india.ti.com ([172.24.191.138]) by dbdp31.itg.ti.com (8.13.8/8.13.8) with ESMTP id p87Crjvt008977; Wed, 7 Sep 2011 18:23:50 +0530 (IST) From: "Govindraj.R" To: CC: , , "Govindraj.R" , Kevin Hilman , Paul Walmsley , Tony Lindgren , Vishwanath Sripathy , Partha Basak Subject: [PATCH v4 06/11] Serial: OMAP: Store certain reg values to port structure Date: Wed, 7 Sep 2011 18:23:28 +0530 Message-ID: <1315400013-4849-7-git-send-email-govindraj.raja@ti.com> X-Mailer: git-send-email 1.7.4.1 In-Reply-To: <1315400013-4849-1-git-send-email-govindraj.raja@ti.com> References: <1315400013-4849-1-git-send-email-govindraj.raja@ti.com> MIME-Version: 1.0 Sender: linux-omap-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org X-Greylist: IP, sender and recipient auto-whitelisted, not delayed by milter-greylist-4.2.6 (demeter2.kernel.org [140.211.167.43]); Wed, 07 Sep 2011 16:03:40 +0000 (UTC) In preparation to runtime conversion add missing uart regs to port structure which can be used in context restore. Also ensuring all uart reg info's are part of port structure. Signed-off-by: Govindraj.R --- arch/arm/plat-omap/include/plat/omap-serial.h | 3 ++ drivers/tty/serial/omap-serial.c | 33 ++++++++++++++---------- 2 files changed, 22 insertions(+), 14 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index f79a76f..06e3aa2 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -104,6 +104,9 @@ struct uart_omap_port { unsigned char mcr; unsigned char fcr; unsigned char efr; + unsigned char dll; + unsigned char dlh; + unsigned char mdr1; int use_dma; /* diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 5e713d3..6ac0ade 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -433,8 +433,9 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; - mcr |= up->mcr; - serial_out(up, UART_MCR, mcr); + up->mcr = serial_in(up, UART_MCR); + up->mcr |= mcr; + serial_out(up, UART_MCR, up->mcr); } static void serial_omap_break_ctl(struct uart_port *port, int break_state) @@ -573,8 +574,6 @@ static inline void serial_omap_configure_xonxoff (struct uart_omap_port *up, struct ktermios *termios) { - unsigned char efr = 0; - up->lcr = serial_in(up, UART_LCR); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); up->efr = serial_in(up, UART_EFR); @@ -584,8 +583,7 @@ serial_omap_configure_xonxoff serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); /* clear SW control mode bits */ - efr = up->efr; - efr &= OMAP_UART_SW_CLR; + up->efr &= OMAP_UART_SW_CLR; /* * IXON Flag: @@ -593,7 +591,7 @@ serial_omap_configure_xonxoff * Transmit XON1, XOFF1 */ if (termios->c_iflag & IXON) - efr |= OMAP_UART_SW_TX; + up->efr |= OMAP_UART_SW_TX; /* * IXOFF Flag: @@ -601,7 +599,7 @@ serial_omap_configure_xonxoff * Receiver compares XON1, XOFF1. */ if (termios->c_iflag & IXOFF) - efr |= OMAP_UART_SW_RX; + up->efr |= OMAP_UART_SW_RX; serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); @@ -624,7 +622,7 @@ serial_omap_configure_xonxoff * load the new software flow control mode IXON or IXOFF * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. */ - serial_out(up, UART_EFR, efr | UART_EFR_SCD); + serial_out(up, UART_EFR, up->efr | UART_EFR_SCD); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR); @@ -671,6 +669,10 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); quot = serial_omap_get_divisor(port, baud); + up->dll = quot & 0xff; + up->dlh = quot >> 8; + up->mdr1 = UART_OMAP_MDR1_DISABLE; + up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | UART_FCR_ENABLE_FIFO; if (up->use_dma) @@ -723,6 +725,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; /* FIFOs and DMA Settings */ @@ -759,7 +762,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, /* Protocol, Baud Rate, and Interrupt Settings */ - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + serial_out(up, UART_OMAP_MDR1, up->mdr1); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); up->efr = serial_in(up, UART_EFR); @@ -769,8 +772,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_IER, 0); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_DLL, up->dll); /* LS of divisor */ + serial_out(up, UART_DLM, up->dlh); /* MS of divisor */ serial_out(up, UART_LCR, 0); serial_out(up, UART_IER, up->ier); @@ -780,9 +783,11 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_LCR, cval); if (baud > 230400 && baud != 3000000) - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); + up->mdr1 = UART_OMAP_MDR1_13X_MODE; else - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); + up->mdr1 = UART_OMAP_MDR1_16X_MODE; + + serial_out(up, UART_OMAP_MDR1, up->mdr1); /* Hardware Flow Control Configuration */