| Message ID | 1342099542-13862-1-git-send-email-ruslan.bilovol@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi, On Thu, Jul 12, 2012 at 6:55 PM, Ruslan Bilovol <ruslan.bilovol@ti.com> wrote: > TWL6030/32 that is used on 4430sdp board can deliver up to 200mA > for OTG port power supply in the HOST mode. > > Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> > --- > arch/arm/mach-omap2/board-4430sdp.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c > index 8e17284..10223f5 100644 > --- a/arch/arm/mach-omap2/board-4430sdp.c > +++ b/arch/arm/mach-omap2/board-4430sdp.c > @@ -429,7 +429,7 @@ static struct platform_device *sdp4430_devices[] __initdata = { > static struct omap_musb_board_data musb_board_data = { > .interface_type = MUSB_INTERFACE_UTMI, > .mode = MUSB_OTG, > - .power = 100, > + .power = 200, > }; Shouldn't this change be made for omap4 panda as well. Thanks Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Fri, Jul 13, 2012 at 8:53 AM, ABRAHAM, KISHON VIJAY <kishon@ti.com> wrote: > > Hi, > > On Thu, Jul 12, 2012 at 6:55 PM, Ruslan Bilovol <ruslan.bilovol@ti.com> > wrote: > > TWL6030/32 that is used on 4430sdp board can deliver up to 200mA > > for OTG port power supply in the HOST mode. > > > > Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> > > --- > > arch/arm/mach-omap2/board-4430sdp.c | 2 +- > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/mach-omap2/board-4430sdp.c > > b/arch/arm/mach-omap2/board-4430sdp.c > > index 8e17284..10223f5 100644 > > --- a/arch/arm/mach-omap2/board-4430sdp.c > > +++ b/arch/arm/mach-omap2/board-4430sdp.c > > @@ -429,7 +429,7 @@ static struct platform_device *sdp4430_devices[] > > __initdata = { > > static struct omap_musb_board_data musb_board_data = { > > .interface_type = MUSB_INTERFACE_UTMI, > > .mode = MUSB_OTG, > > - .power = 100, > > + .power = 200, > > }; > > Shouldn't this change be made for omap4 panda as well. Yes, omap4 panda uses same TWL IC. Should I fix this patch or send separate for panda? -- Best regards, Ruslan Bilovol > > Thanks > Kishon -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Jul 18, 2012 at 12:43:22PM +0300, Ruslan Bilovol wrote: > Hi, > > On Fri, Jul 13, 2012 at 8:53 AM, ABRAHAM, KISHON VIJAY <kishon@ti.com> > wrote: > > > > Hi, > > > > On Thu, Jul 12, 2012 at 6:55 PM, Ruslan Bilovol <ruslan.bilovol@ti.com> > > wrote: > > > TWL6030/32 that is used on 4430sdp board can deliver up to 200mA > > > for OTG port power supply in the HOST mode. > > > > > > Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> > > > --- > > > arch/arm/mach-omap2/board-4430sdp.c | 2 +- > > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > > > diff --git a/arch/arm/mach-omap2/board-4430sdp.c > > > b/arch/arm/mach-omap2/board-4430sdp.c > > > index 8e17284..10223f5 100644 > > > --- a/arch/arm/mach-omap2/board-4430sdp.c > > > +++ b/arch/arm/mach-omap2/board-4430sdp.c > > > @@ -429,7 +429,7 @@ static struct platform_device *sdp4430_devices[] > > > __initdata = { > > > static struct omap_musb_board_data musb_board_data = { > > > .interface_type = MUSB_INTERFACE_UTMI, > > > .mode = MUSB_OTG, > > > - .power = 100, > > > + .power = 200, > > > }; > > > > Shouldn't this change be made for omap4 panda as well. > > Yes, omap4 panda uses same TWL IC. Should I fix this patch or send > separate for panda? Fix this patch would be nicer.
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 8e17284..10223f5 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -429,7 +429,7 @@ static struct platform_device *sdp4430_devices[] __initdata = { static struct omap_musb_board_data musb_board_data = { .interface_type = MUSB_INTERFACE_UTMI, .mode = MUSB_OTG, - .power = 100, + .power = 200, }; static struct omap2_hsmmc_info mmc[] = {
TWL6030/32 that is used on 4430sdp board can deliver up to 200mA for OTG port power supply in the HOST mode. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@ti.com> --- arch/arm/mach-omap2/board-4430sdp.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)