diff mbox

[2/2] PWM: EHRPWM: PWM driver support for EHRPWM.

Message ID 1342172102-30363-3-git-send-email-avinashphilip@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

avinash philip July 13, 2012, 9:35 a.m. UTC
Enhanced high resolution PWM module (EHRPWM) hardware can be used to
generate PWM output over 2 channels. This commit adds PWM driver support
for EHRPWM device present on AM33XX SOC. Current implementation supports
simple PWM functionality.

Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
---
:100644 100644 f20b8f2... ad62d7a... M	drivers/pwm/Kconfig
:100644 100644 7dd90ec... 636a1d6... M	drivers/pwm/Makefile
:000000 100644 0000000... 985d334... A	drivers/pwm/pwm-ehrpwm.c
 drivers/pwm/Kconfig      |   10 +
 drivers/pwm/Makefile     |    1 +
 drivers/pwm/pwm-ehrpwm.c |  476 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 487 insertions(+), 0 deletions(-)

Comments

Thierry Reding July 23, 2012, 7:42 a.m. UTC | #1
On Fri, Jul 13, 2012 at 03:05:02PM +0530, Philip, Avinash wrote:
> Enhanced high resolution PWM module (EHRPWM) hardware can be used to
> generate PWM output over 2 channels. This commit adds PWM driver support
> for EHRPWM device present on AM33XX SOC. Current implementation supports
> simple PWM functionality.
> 
> Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
> Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com>

So this driver is very similar to the ECAP one and pretty much all the
comments apply to this as well. Some additional comments below.

> ---
> :100644 100644 f20b8f2... ad62d7a... M	drivers/pwm/Kconfig
> :100644 100644 7dd90ec... 636a1d6... M	drivers/pwm/Makefile
> :000000 100644 0000000... 985d334... A	drivers/pwm/pwm-ehrpwm.c
>  drivers/pwm/Kconfig      |   10 +
>  drivers/pwm/Makefile     |    1 +
>  drivers/pwm/pwm-ehrpwm.c |  476 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 487 insertions(+), 0 deletions(-)
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index f20b8f2..ad62d7a 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -95,4 +95,14 @@ config  PWM_ECAP
>  	  To compile this driver as a module, choose M here: the module
>  	  will be called pwm_ecap.
>  
> +config  PWM_EHRPWM
> +	tristate "EHRPWM PWM support"
> +	depends on SOC_AM33XX
> +	help
> +	  PWM driver support for the EHRPWM controller found on AM33XX
> +	  TI SOC
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called pwm-ehrpwm.
> +

Maybe it would be useful to prefix the names with AM33XX here. ECAP and
EHRPWM are sort of generic and may have name clashes in the future.

> +#define PWM_CHANNEL		2	/* EHRPWM channels */

I'd say you can just replace the one occurrence of this with the literal
2. If you still want to have the symbolic name, then I'd suggest to call
it something like NUM_PWM_CHANNELS to make its meaning more obvious.

> +static int __devexit ehrpwm_pwm_remove(struct platform_device *pdev)
> +{
> +	struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
> +
> +	if (WARN_ON(!pc))
> +		return -ENODEV;
> +
> +	pm_runtime_disable(&pdev->dev);
> +	pwmchip_remove(&pc->chip);
> +	return 0;
> +}

I forgot to mention this for ECAP, but you need to check the return
value of pwmchip_remove() because there are situations where it can
actually fail.

Thierry
avinash philip July 23, 2012, 9:16 a.m. UTC | #2
On Mon, Jul 23, 2012 at 13:12:21, Thierry Reding wrote:
> On Fri, Jul 13, 2012 at 03:05:02PM +0530, Philip, Avinash wrote:
> > Enhanced high resolution PWM module (EHRPWM) hardware can be used to
> > generate PWM output over 2 channels. This commit adds PWM driver support
> > for EHRPWM device present on AM33XX SOC. Current implementation supports
> > simple PWM functionality.
> > 
> > Signed-off-by: Philip, Avinash <avinashphilip@ti.com>
> > Reviewed-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
> 
> So this driver is very similar to the ECAP one and pretty much all the
> comments apply to this as well. Some additional comments below.

Ok I will correct it for all the comments.

> 
> > ---
[snip]
> > +
> > +	  To compile this driver as a module, choose M here: the module
> > +	  will be called pwm-ehrpwm.
> > +
> 
> Maybe it would be useful to prefix the names with AM33XX here. ECAP and
> EHRPWM are sort of generic and may have name clashes in the future.

Ok, I will make us TI prefix as davinci platform also uses same modules.

> 
> > +#define PWM_CHANNEL		2	/* EHRPWM channels */
> 
> I'd say you can just replace the one occurrence of this with the literal
> 2. If you still want to have the symbolic name, then I'd suggest to call
> it something like NUM_PWM_CHANNELS to make its meaning more obvious.

I will correct it as NUM_PWM_CHANNELS.

> 
> > +static int __devexit ehrpwm_pwm_remove(struct platform_device *pdev)
> > +{
> > +	struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
> > +
> > +	if (WARN_ON(!pc))
> > +		return -ENODEV;
> > +
> > +	pm_runtime_disable(&pdev->dev);
> > +	pwmchip_remove(&pc->chip);
> > +	return 0;
> > +}
> 
> I forgot to mention this for ECAP, but you need to check the return
> value of pwmchip_remove() because there are situations where it can
> actually fail.

I will correct it.

Thanks
Avinash

> 
> Thierry
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index f20b8f2..ad62d7a 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -95,4 +95,14 @@  config  PWM_ECAP
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm_ecap.
 
+config  PWM_EHRPWM
+	tristate "EHRPWM PWM support"
+	depends on SOC_AM33XX
+	help
+	  PWM driver support for the EHRPWM controller found on AM33XX
+	  TI SOC
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-ehrpwm.
+
 endif
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 7dd90ec..636a1d6 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -8,3 +8,4 @@  obj-$(CONFIG_PWM_SAMSUNG)	+= pwm-samsung.o
 obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
 obj-$(CONFIG_PWM_VT8500)	+= pwm-vt8500.o
 obj-$(CONFIG_PWM_ECAP)		+= pwm-ecap.o
+obj-$(CONFIG_PWM_EHRPWM)	+= pwm-ehrpwm.o
diff --git a/drivers/pwm/pwm-ehrpwm.c b/drivers/pwm/pwm-ehrpwm.c
new file mode 100644
index 0000000..985d334
--- /dev/null
+++ b/drivers/pwm/pwm-ehrpwm.c
@@ -0,0 +1,476 @@ 
+/*
+ * EHRPWM PWM driver
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+
+/* EHRPWM registers and bits definitions */
+
+/* Time base module registers */
+#define TBCTL			0x00
+#define TBSTS			0x02
+#define TBPHS			0x06
+#define TBCNT			0x08
+#define TBPRD			0x0A
+
+#define TBCTL_RUN_MASK		(BIT(15) | BIT(14))
+#define TBCTL_STOP_NEXT		0
+#define TBCTL_STOP_ON_CYCLE	BIT(14)
+#define TBCTL_FREE_RUN		(BIT(15) | BIT(14))
+#define TBCTL_PRDLD_MASK	BIT(3)
+#define TBCTL_PRDLD_SHDW	0
+#define TBCTL_PRDLD_IMDT	BIT(3)
+#define TBCTL_CTRMODE_MASK	(BIT(1) | BIT(0))
+#define TBCTL_CTRMODE_UP	0
+#define TBCTL_CTRMODE_DOWN	BIT(0)
+#define TBCTL_CTRMODE_UPDOWN	BIT(1)
+#define TBCTL_CLKDIV_MASK	(BIT(12) | BIT(11) | BIT(10) | BIT(9) | \
+				BIT(8) | BIT(7))
+#define TBCTL_CTRMODE_DOWN	BIT(0)
+#define TBCTL_CTRMODE_UPDOWN	BIT(1)
+#define TBCTL_CTRMODE_FREEZE	(BIT(1) | BIT(0))
+#define TBCTL_HSPCLKDIV_SHIFT	7
+#define TBCTL_CLKDIV_SHIFT	10
+
+#define CLKDIV_MAX		7
+#define HSPCLKDIV_MAX		7
+#define PERIOD_MAX		0xFFFF
+
+/* Compare module registers */
+#define CMPCTL			0x0E
+#define CMPA			0x12
+#define CMPB			0x14
+
+/* Action qualifier module registers */
+#define AQCTLA			0x16
+#define AQCTLB			0x18
+#define AQSFRC			0x1A
+#define AQCSFRC			0x1C
+
+#define AQCTL_CBD_MASK		(BIT(11) | BIT(10))
+#define AQCTL_CBD_FRCLOW	BIT(10)
+#define AQCTL_CBD_FRCHIGH	BIT(11)
+#define AQCTL_CBD_FRCTOGGLE	(BIT(11) | BIT(10))
+#define AQCTL_CBU_MASK		(BIT(9) | BIT(8))
+#define AQCTL_CBU_FRCLOW	BIT(8)
+#define AQCTL_CBU_FRCHIGH	BIT(9)
+#define AQCTL_CBU_FRCTOGGLE	(BIT(9) | BIT(8))
+#define AQCTL_CAD_MASK		(BIT(7) | BIT(6))
+#define AQCTL_CAD_FRCLOW	BIT(6)
+#define AQCTL_CAD_FRCHIGH	BIT(7)
+#define AQCTL_CAD_FRCTOGGLE	(BIT(7) | BIT(6))
+#define AQCTL_CAU_MASK		(BIT(5) | BIT(4))
+#define AQCTL_CAU_FRCLOW	BIT(4)
+#define AQCTL_CAU_FRCHIGH	BIT(5)
+#define AQCTL_CAU_FRCTOGGLE	(BIT(5) | BIT(4))
+#define AQCTL_PRD_MASK		(BIT(3) | BIT(2))
+#define AQCTL_PRD_FRCLOW	BIT(2)
+#define AQCTL_PRD_FRCHIGH	BIT(3)
+#define AQCTL_PRD_FRCTOGGLE	(BIT(3) | BIT(2))
+#define AQCTL_ZRO_MASK		(BIT(1) | BIT(0))
+#define AQCTL_ZRO_FRCLOW	BIT(0)
+#define AQCTL_ZRO_FRCHIGH	BIT(1)
+#define AQCTL_ZRO_FRCTOGGLE	(BIT(1) | BIT(0))
+
+#define AQSFRC_RLDCSF_MASK	(BIT(7) | BIT(6))
+#define AQSFRC_RLDCSF_ZRO	0
+#define AQSFRC_RLDCSF_PRD	BIT(6)
+#define AQSFRC_RLDCSF_ZROPRD	BIT(7)
+#define AQSFRC_RLDCSF_IMDT	(BIT(7) | BIT(6))
+#define AQSFRC_OTSFB_MASK	BIT(5)
+#define AQSFRC_OTSFB_FRC1	BIT(5)
+#define AQSFRC_ACTSFB_MASK	(BIT(3) | BIT(4))
+#define AQSFRC_ACTSFB_NOTH	0
+#define AQSFRC_ACTSFB_CLR	BIT(3)
+#define AQSFRC_ACTSFB_SET	BIT(4)
+#define AQSFRC_ACTSFB_TGL	(BIT(4) | BIT(3))
+#define AQSFRC_OTSFA_MASK	BIT(2)
+#define AQSFRC_OTSFA_FRC1	BIT(2)
+#define AQSFRC_ACTSFA_MASK	(BIT(1) | BIT(0))
+#define AQSFRC_ACTSFA_NOTH	0
+#define AQSFRC_ACTSFA_CLR	BIT(0)
+#define AQSFRC_ACTSFA_SET	BIT(1)
+#define AQSFRC_ACTSFA_TGL	(BIT(1) | BIT(0))
+
+#define AQCSFRC_CSFB_MASK	(BIT(3) | BIT(2))
+#define AQCSFRC_CSFB_FRCDIS	0
+#define AQCSFRC_CSFB_FRCLOW	BIT(2)
+#define AQCSFRC_CSFB_FRCHIGH	BIT(3)
+#define AQCSFRC_CSFB_DISSWFRC	(BIT(3) | BIT(2))
+#define AQCSFRC_CSFA_MASK	(BIT(1) | BIT(0))
+#define AQCSFRC_CSFA_FRCDIS	0
+#define AQCSFRC_CSFA_FRCLOW	BIT(0)
+#define AQCSFRC_CSFA_FRCHIGH	BIT(1)
+#define AQCSFRC_CSFA_DISSWFRC	(BIT(1) | BIT(0))
+
+/* Dead band module registers */
+#define DBCTL			0x1E
+#define DBRED			0x20
+#define DBFED			0x22
+
+/* Trip zone module registers */
+#define TZSEL			0x24
+#define TZCTL			0x28
+#define TZEINT			0x2A
+#define TZFLG			0x2C
+#define TZCLR			0x2E
+#define TZFRC			0x30
+
+/* Event trigger module registers */
+#define ETSEL			0x32
+#define ETPS			0x34
+#define ETFLG			0x36
+#define ETCLR			0x38
+#define ETFRC			0x3A
+#define PCCTL			0x3C
+
+/* High resolution module registers */
+#define TBPHSHR			0x04
+#define CMPAHR			0x10
+#define HRCTL			0x40
+
+#define PWM_CHANNEL		2	/* EHRPWM channels */
+
+#define DRIVER_NAME		"ehrpwm"
+
+struct ehrpwm_pwm_chip {
+	struct pwm_chip	chip;
+	unsigned int	clk_rate;
+	void __iomem	*mmio_base;
+	int		pwm_period_ns;
+	int		pwm_duty_ns;
+};
+
+static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct ehrpwm_pwm_chip, chip);
+}
+
+static void ehrpwm_write(void *base, int offset, unsigned long val)
+{
+	writew(val & 0xffff, base + offset);
+}
+
+static void ehrpwm_modify(void *base, int offset, unsigned short mask,
+		unsigned short val)
+{
+	unsigned short regval;
+
+	regval = readw(base + offset);
+	regval &= ~mask;
+	regval |= val & mask;
+	writew(regval, base + offset);
+}
+
+/**
+ * set_prescale_div -	Set up the prescaler divider function
+ * @rqst_prescaler:	prescaler value min
+ * @prescale_div:	prescaler value set
+ * @tb_clk_div:		Time Base Control prescaler bits
+ */
+static int set_prescale_div(unsigned long rqst_prescaler,
+		unsigned short *prescale_div, unsigned short *tb_clk_div)
+{
+	unsigned int clkdiv, hspclkdiv;
+
+	for (clkdiv = 0; clkdiv <= CLKDIV_MAX; clkdiv++) {
+		for (hspclkdiv = 0; hspclkdiv <= HSPCLKDIV_MAX; hspclkdiv++) {
+
+			/*
+			 * calculations for prescaler value :
+			 * prescale_div = HSPCLKDIVIDER * CLKDIVIDER.
+			 * HSPCLKDIVIDER =  2 ** hspclkdiv
+			 * CLKDIVIDER = (1),		if clkdiv == 0 *OR*
+			 *		(2 * clkdiv),	if clkdiv != 0
+			 *
+			 * Configure prescale_div value such that period
+			 * register value is less than 65535.
+			 */
+
+			*prescale_div = (1 << clkdiv) *
+					(hspclkdiv ? (hspclkdiv * 2) : 1);
+			if (*prescale_div > rqst_prescaler) {
+				*tb_clk_div = (clkdiv << TBCTL_CLKDIV_SHIFT) |
+					(hspclkdiv << TBCTL_HSPCLKDIV_SHIFT);
+				return 0;
+			}
+		}
+	}
+	return 1;
+}
+
+static void configure_chans(struct ehrpwm_pwm_chip *pc, int chan,
+		unsigned long duty_cycles)
+{
+	int cmp_reg, aqctl_reg;
+	unsigned short aqctl_val, aqctl_mask;
+
+	/*
+	 * Channels can be configured from action qualifier module.
+	 * Channel 0 configured with compare A register and for
+	 * up-counter mode.
+	 * Channel 1 configured with compare B register and for
+	 * up-counter mode.
+	 */
+	if (chan == 1) {
+		aqctl_reg = AQCTLB;
+		cmp_reg = CMPB;
+		/* Configure PWM Low from compare B value */
+		aqctl_val = AQCTL_CBU_FRCLOW;
+		aqctl_mask = AQCTL_CBU_MASK;
+	} else {
+		cmp_reg = CMPA;
+		aqctl_reg = AQCTLA;
+		/* Configure PWM Low from compare A value */
+		aqctl_val = AQCTL_CAU_FRCLOW;
+		aqctl_mask = AQCTL_CAU_MASK;
+	}
+
+	/* Configure PWM High from period value and zero value */
+	aqctl_val |= AQCTL_PRD_FRCHIGH | AQCTL_ZRO_FRCHIGH;
+	aqctl_mask |= AQCTL_PRD_MASK | AQCTL_ZRO_MASK;
+	ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val);
+
+	ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles);
+}
+
+/*
+ * period_ns = 10^9 * (ps_divval * period_cycles) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (ps_divval * duty_cycles) / PWM_CLK_RATE
+ */
+static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
+		int duty_ns, int period_ns)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+	unsigned long long c;
+	unsigned long period_cycles, duty_cycles;
+	unsigned short ps_divval, tb_divval, chan;
+
+	if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC)
+		return -ERANGE;
+
+	c = pc->clk_rate;
+	c = c * period_ns;
+	do_div(c, NSEC_PER_SEC);
+	period_cycles = (unsigned long)c;
+
+	if (period_cycles < 1) {
+		period_cycles = 1;
+		duty_cycles = 1;
+	} else {
+		c = pc->clk_rate;
+		c = c * duty_ns;
+		do_div(c, NSEC_PER_SEC);
+		duty_cycles = (unsigned long)c;
+	}
+
+	pc->pwm_duty_ns = duty_ns;
+	pc->pwm_period_ns = period_ns;
+
+	/* Configure clock prescaler to support Low frequency PWM wave */
+	if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval,
+				&tb_divval)) {
+		dev_err(chip->dev, "Unsupported values\n");
+		return -EINVAL;
+	}
+
+	pm_runtime_get_sync(chip->dev);
+
+	/* Configure shadow loading on Period register */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_PRDLD_MASK, TBCTL_PRDLD_SHDW);
+
+	/* Update clock prescaler values */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CLKDIV_MASK, tb_divval);
+
+	/* Update period & duty cycle with presacler division */
+	period_cycles = period_cycles / ps_divval;
+	duty_cycles = duty_cycles / ps_divval;
+
+	ehrpwm_write(pc->mmio_base, TBPRD, period_cycles);
+
+	/* Configure ehrpwm counter for up-count mode */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CTRMODE_MASK,
+			TBCTL_CTRMODE_UP);
+
+	/* Configure the channel for duty cycle */
+	chan = pwm->hwpwm;
+	configure_chans(pc, chan, duty_cycles);
+	pm_runtime_put_sync(chip->dev);
+	return 0;
+}
+
+static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+	unsigned short aqcsfrc_val, aqcsfrc_mask;
+
+	/* Leave clock enabled on enabling PWM */
+	pm_runtime_get_sync(chip->dev);
+
+	/* Disabling Action Qualifier on PWM output */
+	if (pwm->hwpwm) {
+		aqcsfrc_val = AQCSFRC_CSFB_FRCDIS;
+		aqcsfrc_mask = AQCSFRC_CSFB_MASK;
+	} else {
+		aqcsfrc_val = AQCSFRC_CSFA_FRCDIS;
+		aqcsfrc_mask = AQCSFRC_CSFA_MASK;
+	}
+
+	/* Changes to shadow mode */
+	ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
+			AQSFRC_RLDCSF_ZRO);
+
+	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+
+	/* Enable time counter for free_run */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
+	return 0;
+}
+
+static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
+	unsigned short aqcsfrc_val, aqcsfrc_mask;
+
+	/* Action Qualifier puts PWM output low forcefully */
+	if (pwm->hwpwm) {
+		aqcsfrc_val = AQCSFRC_CSFB_FRCLOW;
+		aqcsfrc_mask = AQCSFRC_CSFB_MASK;
+	} else {
+		aqcsfrc_val = AQCSFRC_CSFA_FRCLOW;
+		aqcsfrc_mask = AQCSFRC_CSFA_MASK;
+	}
+
+	/*
+	 * Changes to immediate action on Action Qualifier. This puts
+	 * Action Qualifier control on PWM output from next TBCLK
+	 */
+	ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
+			AQSFRC_RLDCSF_IMDT);
+
+	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
+
+	/* Stop Time base counter */
+	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT);
+
+	/* Disable clock on PWM disable */
+	pm_runtime_put_sync(chip->dev);
+}
+
+static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	if (test_bit(PWMF_ENABLED, &pwm->flags)) {
+		dev_warn(chip->dev, "Removing PWM device without disabling\n");
+		pm_runtime_put_sync(chip->dev);
+	}
+}
+
+static struct pwm_ops ehrpwm_pwm_ops = {
+	.free		= ehrpwm_pwm_free,
+	.config		= ehrpwm_pwm_config,
+	.enable		= ehrpwm_pwm_enable,
+	.disable	= ehrpwm_pwm_disable,
+	.owner		= THIS_MODULE,
+};
+
+static int __devinit ehrpwm_pwm_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+	struct clk *clk;
+	struct ehrpwm_pwm_chip *pc;
+
+	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
+	if (!pc) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	clk = devm_clk_get(&pdev->dev, "fck");
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed to get clock\n");
+		return PTR_ERR(clk);
+	}
+
+	pc->clk_rate = clk_get_rate(clk);
+	if (!pc->clk_rate) {
+		dev_err(&pdev->dev, "failed to get clock rate\n");
+		return -EINVAL;
+	}
+
+	pc->chip.dev = &pdev->dev;
+	pc->chip.ops = &ehrpwm_pwm_ops;
+	pc->chip.base = -1;
+	pc->chip.npwm = PWM_CHANNEL;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehrpwm_reg");
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		return -ENODEV;
+	}
+
+	pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+	if (!pc->mmio_base) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		return  -EADDRNOTAVAIL;
+	}
+
+	ret = pwmchip_add(&pc->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
+		return ret;
+	}
+
+	pm_runtime_enable(&pdev->dev);
+	platform_set_drvdata(pdev, pc);
+	dev_info(&pdev->dev, "PWM device initialized\n");
+	return 0;
+}
+
+static int __devexit ehrpwm_pwm_remove(struct platform_device *pdev)
+{
+	struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
+
+	if (WARN_ON(!pc))
+		return -ENODEV;
+
+	pm_runtime_disable(&pdev->dev);
+	pwmchip_remove(&pc->chip);
+	return 0;
+}
+
+static struct platform_driver ehrpwm_pwm_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+	},
+	.probe = ehrpwm_pwm_probe,
+	.remove = __devexit_p(ehrpwm_pwm_remove),
+};
+
+module_platform_driver(ehrpwm_pwm_driver);
+
+MODULE_DESCRIPTION("EHRPWM PWM driver");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_LICENSE("GPL");