@@ -565,6 +565,8 @@ static int generic_dpi_panel_power_on(struct omap_dss_device *dssdev)
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
+ omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
@@ -726,7 +728,7 @@ static void generic_dpi_panel_set_timings(struct omap_dss_device *dssdev,
mutex_lock(&drv_data->lock);
- dpi_set_timings(dssdev, timings);
+ omapdss_dpi_set_timings(dssdev, timings);
mutex_unlock(&drv_data->lock);
}
@@ -55,6 +55,8 @@ static int lb035q02_panel_power_on(struct omap_dss_device *dssdev)
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
+ omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
@@ -175,6 +175,8 @@ static int nec_8048_panel_power_on(struct omap_dss_device *dssdev)
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
+ omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
@@ -377,6 +377,9 @@ static int picodlp_panel_power_on(struct omap_dss_device *dssdev)
* then only i2c commands can be successfully sent to dpp2600
*/
msleep(1000);
+
+ omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
r = omapdss_dpi_display_enable(dssdev);
if (r) {
dev_err(&dssdev->dev, "failed to enable DPI\n");
@@ -142,6 +142,8 @@ static int sharp_ls_power_on(struct omap_dss_device *dssdev)
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
+ omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
@@ -65,6 +65,8 @@ static int tfp410_power_on(struct omap_dss_device *dssdev)
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
+ omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
@@ -231,7 +233,7 @@ static void tfp410_set_timings(struct omap_dss_device *dssdev,
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
mutex_lock(&ddata->lock);
- dpi_set_timings(dssdev, timings);
+ omapdss_dpi_set_timings(dssdev, timings);
mutex_unlock(&ddata->lock);
}
@@ -337,6 +337,8 @@ static int tpo_td043_enable_dss(struct omap_dss_device *dssdev)
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
+ omapdss_dpi_set_timings(dssdev, &dssdev->panel.timings);
+
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
@@ -480,7 +482,7 @@ static void tpo_td043_remove(struct omap_dss_device *dssdev)
static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
- dpi_set_timings(dssdev, timings);
+ omapdss_dpi_set_timings(dssdev, timings);
}
static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
@@ -41,6 +41,7 @@ static struct {
struct mutex lock;
+ struct omap_video_timings timings;
struct dss_lcd_mgr_config mgr_config;
} dpi;
@@ -138,7 +139,7 @@ static int dpi_set_dispc_clk(unsigned long pck_req, unsigned long *fck,
static int dpi_set_mode(struct omap_dss_device *dssdev)
{
- struct omap_video_timings *t = &dssdev->panel.timings;
+ struct omap_video_timings *t = &dpi.timings;
int lck_div = 0, pck_div = 0;
unsigned long fck = 0;
unsigned long pck;
@@ -293,8 +294,8 @@ void omapdss_dpi_display_disable(struct omap_dss_device *dssdev)
}
EXPORT_SYMBOL(omapdss_dpi_display_disable);
-void dpi_set_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings)
+void omapdss_dpi_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
{
int r;
@@ -302,7 +303,9 @@ void dpi_set_timings(struct omap_dss_device *dssdev,
mutex_lock(&dpi.lock);
+ dpi.timings = *timings;
dssdev->panel.timings = *timings;
+
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
r = dispc_runtime_get();
if (r)
@@ -317,7 +320,7 @@ void dpi_set_timings(struct omap_dss_device *dssdev,
mutex_unlock(&dpi.lock);
}
-EXPORT_SYMBOL(dpi_set_timings);
+EXPORT_SYMBOL(omapdss_dpi_set_timings);
int dpi_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
@@ -751,8 +751,8 @@ void omapdss_dsi_display_disable(struct omap_dss_device *dssdev,
int omapdss_dpi_display_enable(struct omap_dss_device *dssdev);
void omapdss_dpi_display_disable(struct omap_dss_device *dssdev);
-void dpi_set_timings(struct omap_dss_device *dssdev,
- struct omap_video_timings *timings);
+void omapdss_dpi_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings);
int dpi_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings);
The DPI driver currently relies on the timings in omap_dss_device struct to configure the DISPC accordingly. This makes the DPI interface driver dependent on the omap_dss_device struct. Make the DPI driver data maintain it's own timings field. The panel driver is expected to call dpi_set_timings()(renamed to omapdss_dpi_set_timings) to set these timings before the panel is enabled. In the set_timings() op, we still ensure that the omap_dss_device timings (dssdev->panel.timings) are configured. This will later be configured only by the DPI panel drivers. Signed-off-by: Archit Taneja <archit@ti.com> --- drivers/video/omap2/displays/panel-generic-dpi.c | 4 +++- .../omap2/displays/panel-lgphilips-lb035q02.c | 2 ++ .../omap2/displays/panel-nec-nl8048hl11-01b.c | 2 ++ drivers/video/omap2/displays/panel-picodlp.c | 3 +++ .../video/omap2/displays/panel-sharp-ls037v7dw01.c | 2 ++ drivers/video/omap2/displays/panel-tfp410.c | 4 +++- .../video/omap2/displays/panel-tpo-td043mtea1.c | 4 +++- drivers/video/omap2/dss/dpi.c | 11 +++++++---- include/video/omapdss.h | 4 ++-- 9 files changed, 27 insertions(+), 9 deletions(-)