@@ -591,19 +591,23 @@ static void acx_panel_remove(struct omap_dss_device *dssdev)
static int acx_panel_power_on(struct omap_dss_device *dssdev)
{
struct acx565akm_device *md = &acx_dev;
+ struct omap_dss_output *out = dssdev->output;
int r;
dev_dbg(&dssdev->dev, "%s\n", __func__);
+ if (out == NULL)
+ return -ENODEV;
+
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
mutex_lock(&md->mutex);
- omapdss_sdi_set_timings(dssdev, &dssdev->panel.timings);
- omapdss_sdi_set_datapairs(dssdev, dssdev->phy.sdi.datapairs);
+ omapdss_sdi_set_timings(out, &dssdev->panel.timings);
+ omapdss_sdi_set_datapairs(out, dssdev->phy.sdi.datapairs);
- r = omapdss_sdi_display_enable(dssdev);
+ r = omapdss_sdi_display_enable(out);
if (r) {
pr_err("%s sdi enable failed\n", __func__);
goto fail_unlock;
@@ -646,7 +650,7 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
return acx565akm_bl_update_status(md->bl_dev);
fail:
- omapdss_sdi_display_disable(dssdev);
+ omapdss_sdi_display_disable(out);
fail_unlock:
mutex_unlock(&md->mutex);
return r;
@@ -655,6 +659,7 @@ fail_unlock:
static void acx_panel_power_off(struct omap_dss_device *dssdev)
{
struct acx565akm_device *md = &acx_dev;
+ struct omap_dss_output *out = dssdev->output;
dev_dbg(&dssdev->dev, "%s\n", __func__);
@@ -684,7 +689,7 @@ static void acx_panel_power_off(struct omap_dss_device *dssdev)
/* FIXME need to tweak this delay */
msleep(100);
- omapdss_sdi_display_disable(dssdev);
+ omapdss_sdi_display_disable(out);
mutex_unlock(&md->mutex);
}
@@ -734,7 +739,12 @@ static int acx_panel_resume(struct omap_dss_device *dssdev)
static void acx_panel_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
- omapdss_sdi_set_timings(dssdev, timings);
+ struct omap_dss_output *out = dssdev->output;
+
+ if (out == NULL)
+ return;
+
+ omapdss_sdi_set_timings(out, timings);
dssdev->panel.timings = *timings;
}
@@ -38,7 +38,7 @@ static struct {
int datapairs;
} sdi;
-static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
+static void sdi_config_lcd_manager(struct omap_dss_output *out)
{
sdi.mgr_config.io_pad_mode = DSS_IO_PAD_MODE_BYPASS;
@@ -48,10 +48,10 @@ static void sdi_config_lcd_manager(struct omap_dss_device *dssdev)
sdi.mgr_config.video_port_width = 24;
sdi.mgr_config.lcden_sig_polarity = 1;
- dss_mgr_set_lcd_config(dssdev->manager, &sdi.mgr_config);
+ dss_mgr_set_lcd_config(out->manager, &sdi.mgr_config);
}
-int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
+int omapdss_sdi_display_enable(struct omap_dss_output *out)
{
struct omap_video_timings *t = &sdi.timings;
struct dss_clock_info dss_cinfo;
@@ -59,12 +59,12 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
unsigned long pck;
int r;
- if (dssdev->manager == NULL) {
+ if (out->manager == NULL) {
DSSERR("failed to enable display: no manager\n");
return -ENODEV;
}
- r = omap_dss_start_device(dssdev);
+ r = omap_dss_start_device(out->device);
if (r) {
DSSERR("failed to start device\n");
goto err_start_dev;
@@ -98,14 +98,13 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
t->pixel_clock = pck;
}
-
- dss_mgr_set_timings(dssdev->manager, t);
+ dss_mgr_set_timings(out->manager, t);
r = dss_set_clock_div(&dss_cinfo);
if (r)
goto err_set_dss_clock_div;
- sdi_config_lcd_manager(dssdev);
+ sdi_config_lcd_manager(out);
dss_sdi_init(sdi.datapairs);
@@ -114,7 +113,7 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
goto err_sdi_enable;
mdelay(2);
- r = dss_mgr_enable(dssdev->manager);
+ r = dss_mgr_enable(out->manager);
if (r)
goto err_mgr_enable;
@@ -129,15 +128,15 @@ err_calc_clock_div:
err_get_dispc:
regulator_disable(sdi.vdds_sdi_reg);
err_reg_enable:
- omap_dss_stop_device(dssdev);
+ omap_dss_stop_device(out->device);
err_start_dev:
return r;
}
EXPORT_SYMBOL(omapdss_sdi_display_enable);
-void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
+void omapdss_sdi_display_disable(struct omap_dss_output *out)
{
- dss_mgr_disable(dssdev->manager);
+ dss_mgr_disable(out->manager);
dss_sdi_disable();
@@ -145,28 +144,29 @@ void omapdss_sdi_display_disable(struct omap_dss_device *dssdev)
regulator_disable(sdi.vdds_sdi_reg);
- omap_dss_stop_device(dssdev);
+ omap_dss_stop_device(out->device);
}
EXPORT_SYMBOL(omapdss_sdi_display_disable);
-void omapdss_sdi_set_timings(struct omap_dss_device *dssdev,
+void omapdss_sdi_set_timings(struct omap_dss_output *out,
struct omap_video_timings *timings)
{
int r;
+ struct omap_dss_device *dssdev = out->device;
sdi.timings = *timings;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE) {
- omapdss_sdi_display_disable(dssdev);
+ omapdss_sdi_display_disable(out);
- r = omapdss_sdi_display_enable(dssdev);
+ r = omapdss_sdi_display_enable(out);
if (r)
DSSERR("failed to set new timings\n");
}
}
EXPORT_SYMBOL(omapdss_sdi_set_timings);
-void omapdss_sdi_set_datapairs(struct omap_dss_device *dssdev, int datapairs)
+void omapdss_sdi_set_datapairs(struct omap_dss_output *out, int datapairs)
{
sdi.datapairs = datapairs;
}
@@ -792,11 +792,11 @@ int dpi_check_timings(struct omap_dss_output *out,
struct omap_video_timings *timings);
void omapdss_dpi_set_data_lines(struct omap_dss_output *out, int data_lines);
-int omapdss_sdi_display_enable(struct omap_dss_device *dssdev);
-void omapdss_sdi_display_disable(struct omap_dss_device *dssdev);
-void omapdss_sdi_set_timings(struct omap_dss_device *dssdev,
+int omapdss_sdi_display_enable(struct omap_dss_output *out);
+void omapdss_sdi_display_disable(struct omap_dss_output *out);
+void omapdss_sdi_set_timings(struct omap_dss_output *out,
struct omap_video_timings *timings);
-void omapdss_sdi_set_datapairs(struct omap_dss_device *dssdev, int datapairs);
+void omapdss_sdi_set_datapairs(struct omap_dss_output *out, int datapairs);
int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev);
void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev);
With outputs introduces as new entities, we can now pass output pointer to functions used to configure the connected interface. These functions currently pass the omap_dss_device pointer, and extract output information via omap_dss_device. This is unnecessary, and it doesn't make sense for interface related functions to get the panel's/device's pointer, it should receive a pointer related to the connected interface, which in our case is the output entity. With the addition of outputs. There is a possibility that an omap_dss_device isn't connected to an output yet. Ensure that panel drivers call the interface functions only if outputs are non NULL. Modify SDI functions to pass omap_dss_output pointer instead of omap_dss_device pointer. Modify the panel drivers to call the updated functions. Signed-off-by: Archit Taneja <archit@ti.com> --- drivers/video/omap2/displays/panel-acx565akm.c | 22 ++++++++++----- drivers/video/omap2/dss/sdi.c | 34 ++++++++++++------------ include/video/omapdss.h | 8 +++--- 3 files changed, 37 insertions(+), 27 deletions(-)