@@ -621,29 +621,6 @@ static struct omap_dss_device sdp4430_lcd_device = {
.phy.dsi = {
.module = 0,
},
-
- .clocks = {
- .dispc = {
- .channel = {
- /* Logic Clock = 172.8 MHz */
- .lck_div = 1,
- /* Pixel Clock = 34.56 MHz */
- .pck_div = 5,
- .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
- },
- .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
- },
-
- .dsi = {
- .regn = 16, /* Fint = 2.4 MHz */
- .regm = 180, /* DDR Clock = 216 MHz */
- .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */
- .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */
-
- .lp_clk_div = 10, /* LP Clock = 8.64 MHz */
- .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
- },
- },
.channel = OMAP_DSS_CHANNEL_LCD,
};
@@ -668,29 +645,6 @@ static struct omap_dss_device sdp4430_lcd2_device = {
.module = 1,
},
-
- .clocks = {
- .dispc = {
- .channel = {
- /* Logic Clock = 172.8 MHz */
- .lck_div = 1,
- /* Pixel Clock = 34.56 MHz */
- .pck_div = 5,
- .lcd_clk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
- },
- .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
- },
-
- .dsi = {
- .regn = 16, /* Fint = 2.4 MHz */
- .regm = 180, /* DDR Clock = 216 MHz */
- .regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */
- .regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */
-
- .lp_clk_div = 10, /* LP Clock = 8.64 MHz */
- .dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
- },
- },
.channel = OMAP_DSS_CHANNEL_LCD2,
};
DSI clocks are now configured dynamically by the DSI driver, so we can remove the hardcoded clock configuration from the board file. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/board-4430sdp.c | 46 ----------------------------------- 1 file changed, 46 deletions(-)