| Message ID | 1346680491-4211-3-git-send-email-florian.vaussard@epfl.ch (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 9/3/2012 7:24 PM, Florian Vaussard wrote: > Add device tree properties for twl4030/gpio, according to the > platform data of corresponding boards. This enables the led > connected to LEDB output for both boards, as well as > pullups/pulldowns on GPIO for the BeagleBoard. > > Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> > --- > arch/arm/boot/dts/omap3-beagle.dts | 20 ++++++++++++++++++++ > arch/arm/boot/dts/omap3-evm.dts | 13 +++++++++++++ > 2 files changed, 33 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts > index cdcb98c..16bff8b 100644 > --- a/arch/arm/boot/dts/omap3-beagle.dts > +++ b/arch/arm/boot/dts/omap3-beagle.dts > @@ -17,6 +17,14 @@ > device_type = "memory"; > reg = <0x80000000 0x20000000>; /* 512 MB */ > }; > + > + leds { > + compatible = "gpio-leds"; > + pmu_stat { > + label = "beagleboard::pmu_stat"; > + gpios = <&twl_gpio 19 0>; /* LEDB */ > + }; > + }; > }; > > &i2c1 { > @@ -67,3 +75,15 @@ > &mmc3 { > status = "disabled"; > }; > + > +&twl_gpio { > + ti,use-leds = "true"; > + /* pullups: BIT(1) */ > + ti,pullups = <2>; > + /* > + * pulldowns: > + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) > + * BIT(15), BIT(16), BIT(17) > + */ > + ti,pulldowns = <238020>; Consider changing above value to hex presentation. Otherwise looks ok to me, also I have tested it on OMAP3EVM. Tested-&-Acked-By: Vaibhav Hiremath <hvaibhav@ti.com> Thanks, Vaibhav > +}; > diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts > index f349ee9..f1e18fe 100644 > --- a/arch/arm/boot/dts/omap3-evm.dts > +++ b/arch/arm/boot/dts/omap3-evm.dts > @@ -17,6 +17,15 @@ > device_type = "memory"; > reg = <0x80000000 0x10000000>; /* 256 MB */ > }; > + > + leds { > + compatible = "gpio-leds"; > + ledb { > + label = "omap3evm::ledb"; > + gpios = <&twl_gpio 19 0>; /* LEDB */ > + linux,default-trigger = "default-on"; > + }; > + }; > }; > > &i2c1 { > @@ -46,3 +55,7 @@ > reg = <0x5c>; > }; > }; > + > +&twl_gpio { > + ti,use-leds = "true"; > +}; > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Sep 3, 2012 at 3:54 PM, Florian Vaussard <florian.vaussard@epfl.ch> wrote: > Add device tree properties for twl4030/gpio, according to the > platform data of corresponding boards. This enables the led > connected to LEDB output for both boards, as well as > pullups/pulldowns on GPIO for the BeagleBoard. > > Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index cdcb98c..16bff8b 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -17,6 +17,14 @@ device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + }; }; &i2c1 { @@ -67,3 +75,15 @@ &mmc3 { status = "disabled"; }; + +&twl_gpio { + ti,use-leds = "true"; + /* pullups: BIT(1) */ + ti,pullups = <2>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <238020>; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index f349ee9..f1e18fe 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -17,6 +17,15 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + leds { + compatible = "gpio-leds"; + ledb { + label = "omap3evm::ledb"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + linux,default-trigger = "default-on"; + }; + }; }; &i2c1 { @@ -46,3 +55,7 @@ reg = <0x5c>; }; }; + +&twl_gpio { + ti,use-leds = "true"; +};
Add device tree properties for twl4030/gpio, according to the platform data of corresponding boards. This enables the led connected to LEDB output for both boards, as well as pullups/pulldowns on GPIO for the BeagleBoard. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> --- arch/arm/boot/dts/omap3-beagle.dts | 20 ++++++++++++++++++++ arch/arm/boot/dts/omap3-evm.dts | 13 +++++++++++++ 2 files changed, 33 insertions(+), 0 deletions(-)