diff mbox

[v4,20/21] serial: omap: move uart_omap_port definition to C file

Message ID 1346935540-1792-21-git-send-email-balbi@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Felipe Balbi Sept. 6, 2012, 12:45 p.m. UTC
nobody needs to access the uart_omap_port structure
other than omap-serial.c file. Let's move that
structure definition to the C source file in order
to prevent anyone from accessing our structure.

Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
 arch/arm/plat-omap/include/plat/omap-serial.h | 37 --------------------------
 drivers/tty/serial/omap-serial.c              | 38 +++++++++++++++++++++++++++
 2 files changed, 38 insertions(+), 37 deletions(-)

Comments

Kevin Hilman Sept. 6, 2012, 9:58 p.m. UTC | #1
Felipe Balbi <balbi@ti.com> writes:

> nobody needs to access the uart_omap_port structure
> other than omap-serial.c file. Let's move that
> structure definition to the C source file in order
> to prevent anyone from accessing our structure.
>
> Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com>
> Acked-by: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Felipe Balbi <balbi@ti.com>

This one is clearly broken, and causes compile breakage...

> ---
>  arch/arm/plat-omap/include/plat/omap-serial.h | 37 --------------------------
>  drivers/tty/serial/omap-serial.c              | 38 +++++++++++++++++++++++++++
>  2 files changed, 38 insertions(+), 37 deletions(-)
>
> diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
> index a79ed8b..3c9fd3e 100644
> --- a/arch/arm/plat-omap/include/plat/omap-serial.h
> +++ b/arch/arm/plat-omap/include/plat/omap-serial.h
> @@ -105,45 +105,8 @@ struct uart_omap_dma {
>  	unsigned int		rx_timeout;
>  };
>  
> -struct uart_omap_port {
> -	struct uart_port	port;
> -	struct uart_omap_dma	uart_dma;
> -	struct device		*dev;
> -
> -	unsigned char		ier;
> -	unsigned char		lcr;
> -	unsigned char		mcr;
> -	unsigned char		fcr;
> -	unsigned char		efr;
> -	unsigned char		dll;
> -	unsigned char		dlh;
> -	unsigned char		mdr1;
> -	unsigned char		scr;
> -
> -	int			use_dma;
> -	/*
> -	 * Some bits in registers are cleared on a read, so they must
> -	 * be saved whenever the register is read but the bits will not
> -	 * be immediately processed.
> -	 */
> -	unsigned int		lsr_break_flag;
> -	unsigned char		msr_saved_flags;
> -	char			name[20];
> -	unsigned long		port_activity;
> -	u32			context_loss_cnt;
> -	u32			errata;
> -	u8			wakeups_enabled;
>  
>  	int			DTR_gpio;
>  	int			DTR_inverted;
>  	int			DTR_active;

The whole struct has moved, but some fields left behind?

This looks to be caused by the rebase which includes Neil Brown's DTR
GPIO change[1]

> -
> -	struct pm_qos_request	pm_qos_request;
> -	u32			latency;
> -	u32			calc_latency;
> -	struct work_struct	qos_work;
> -};
> -
> -#define to_uart_omap_port(p)	((container_of((p), struct uart_omap_port, port)))
> -
>  #endif /* __OMAP_SERIAL_H__ */
> diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
> index 881b652..164c3c9 100644
> --- a/drivers/tty/serial/omap-serial.c
> +++ b/drivers/tty/serial/omap-serial.c
> @@ -70,6 +70,44 @@
>  #define OMAP_UART_MVR_MAJ_SHIFT		8
>  #define OMAP_UART_MVR_MIN_MASK		0x3f
>  
> +struct uart_omap_port {
> +	struct uart_port	port;
> +	struct uart_omap_dma	uart_dma;
> +	struct device		*dev;
> +
> +	unsigned char		ier;
> +	unsigned char		lcr;
> +	unsigned char		mcr;
> +	unsigned char		fcr;
> +	unsigned char		efr;
> +	unsigned char		dll;
> +	unsigned char		dlh;
> +	unsigned char		mdr1;
> +	unsigned char		scr;
> +
> +	int			use_dma;
> +	/*
> +	 * Some bits in registers are cleared on a read, so they must
> +	 * be saved whenever the register is read but the bits will not
> +	 * be immediately processed.
> +	 */
> +	unsigned int		lsr_break_flag;
> +	unsigned char		msr_saved_flags;
> +	char			name[20];
> +	unsigned long		port_activity;
> +	u32			context_loss_cnt;
> +	u32			errata;
> +	u8			wakeups_enabled;
> +	unsigned int		irq_pending:1;

And this field was not in the original, yet the changelog describes this
as a move.

Why is a this new field added (and not described in the changelog.)

Kevin


[1]
commit 9574f36fb801035f6ab0fbb1b53ce2c12c17d100
Author: NeilBrown <neilb@suse.de>
Date:   Mon Jul 30 10:30:26 2012 +1000

    OMAP/serial: Add support for driving a GPIO as DTR.
    
    OMAP hardware doesn't provide a phyisical DTR line, but
    some configurations may need a DTR line which tracks whether
    the device is open or not.
    
    So allow a gpio to be configured as the DTR line.
    
    Signed-off-by: NeilBrown <neilb@suse.de>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
index a79ed8b..3c9fd3e 100644
--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -105,45 +105,8 @@  struct uart_omap_dma {
 	unsigned int		rx_timeout;
 };
 
-struct uart_omap_port {
-	struct uart_port	port;
-	struct uart_omap_dma	uart_dma;
-	struct device		*dev;
-
-	unsigned char		ier;
-	unsigned char		lcr;
-	unsigned char		mcr;
-	unsigned char		fcr;
-	unsigned char		efr;
-	unsigned char		dll;
-	unsigned char		dlh;
-	unsigned char		mdr1;
-	unsigned char		scr;
-
-	int			use_dma;
-	/*
-	 * Some bits in registers are cleared on a read, so they must
-	 * be saved whenever the register is read but the bits will not
-	 * be immediately processed.
-	 */
-	unsigned int		lsr_break_flag;
-	unsigned char		msr_saved_flags;
-	char			name[20];
-	unsigned long		port_activity;
-	u32			context_loss_cnt;
-	u32			errata;
-	u8			wakeups_enabled;
 
 	int			DTR_gpio;
 	int			DTR_inverted;
 	int			DTR_active;
-
-	struct pm_qos_request	pm_qos_request;
-	u32			latency;
-	u32			calc_latency;
-	struct work_struct	qos_work;
-};
-
-#define to_uart_omap_port(p)	((container_of((p), struct uart_omap_port, port)))
-
 #endif /* __OMAP_SERIAL_H__ */
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 881b652..164c3c9 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -70,6 +70,44 @@ 
 #define OMAP_UART_MVR_MAJ_SHIFT		8
 #define OMAP_UART_MVR_MIN_MASK		0x3f
 
+struct uart_omap_port {
+	struct uart_port	port;
+	struct uart_omap_dma	uart_dma;
+	struct device		*dev;
+
+	unsigned char		ier;
+	unsigned char		lcr;
+	unsigned char		mcr;
+	unsigned char		fcr;
+	unsigned char		efr;
+	unsigned char		dll;
+	unsigned char		dlh;
+	unsigned char		mdr1;
+	unsigned char		scr;
+
+	int			use_dma;
+	/*
+	 * Some bits in registers are cleared on a read, so they must
+	 * be saved whenever the register is read but the bits will not
+	 * be immediately processed.
+	 */
+	unsigned int		lsr_break_flag;
+	unsigned char		msr_saved_flags;
+	char			name[20];
+	unsigned long		port_activity;
+	u32			context_loss_cnt;
+	u32			errata;
+	u8			wakeups_enabled;
+	unsigned int		irq_pending:1;
+
+	struct pm_qos_request	pm_qos_request;
+	u32			latency;
+	u32			calc_latency;
+	struct work_struct	qos_work;
+};
+
+#define to_uart_omap_port(p)	((container_of((p), struct uart_omap_port, port)))
+
 static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
 
 /* Forward declaration of functions */