new file mode 100644
@@ -0,0 +1,30 @@
+OMAP Timer controller bindings
+
+Required properties:
+- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers
+- reg: Contains timer register address range (base address and length)
+- interrupts: Contains the interrupt information for the timer. The format is
+ being dependent on which interrupt controller the OMAP device
+ uses.
+
+OMAP specific properties:
+- ti,hwmods: Name of the hwmod associated to the timer, "timer<X>",
+ where <X> is the instance number of the timer from the
+ HW spec.
+- ti,timer-alwon: Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp: Indicates the timer can interrupt the on-chip DSP in
+ addition to the ARM CPU.
+- ti,timer-pwm: Indicates the timer can generate a PWM output.
+- ti,timer-secure: Indicates the timer is reserved on a secure OMAP device
+ and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48304000 0xfff>;
+ interrupts = <95>;
+ ti,hwmods = "timer12"
+ ti,timer-alwon;
+ ti,timer-secure;
+};
@@ -210,5 +210,66 @@
interrupt-parent = <&intc>;
interrupts = <91>;
};
+
+ timer1: timer@44e31000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x44e31000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <67>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
+
+ timer2: timer@48040000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48040000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <68>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@48042000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48042000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <69>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@48044000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48044000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <92>;
+ ti,hwmods = "timer4";
+ ti,timer-pwm;
+ };
+
+ timer5: timer@48046000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48046000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <93>;
+ ti,hwmods = "timer5";
+ ti,timer-pwm;
+ };
+
+ timer6: timer@48048000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48048000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <94>;
+ ti,hwmods = "timer6";
+ ti,timer-pwm;
+ };
+
+ timer7: timer@4804a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4804a000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <95>;
+ ti,hwmods = "timer7";
+ ti,timer-pwm;
+ };
};
};
@@ -12,6 +12,7 @@
/ {
compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
+ interrupt-parent = <&intc>;
aliases {
serial0 = &uart1;
@@ -65,5 +66,90 @@
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
+
+ timer2: timer@4802a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4802a000 0xfff>;
+ interrupts = <38>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@48078000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48078000 0xfff>;
+ interrupts = <39>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@4807a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4807a000 0xfff>;
+ interrupts = <40>;
+ ti,hwmods = "timer4";
+ };
+
+ timer5: timer@4807c000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4807c000 0xfff>;
+ interrupts = <41>;
+ ti,hwmods = "timer5";
+ ti,timer-dsp;
+ };
+
+ timer6: timer@4807e000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4807e000 0xfff>;
+ interrupts = <42>;
+ ti,hwmods = "timer6";
+ ti,timer-dsp;
+ };
+
+ timer7: timer@48080000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48080000 0xfff>;
+ interrupts = <43>;
+ ti,hwmods = "timer7";
+ ti,timer-dsp;
+ };
+
+ timer8: timer@48082000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48082000 0xfff>;
+ interrupts = <44>;
+ ti,hwmods = "timer8";
+ ti,timer-dsp;
+ };
+
+ timer9: timer@48084000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48084000 0xfff>;
+ interrupts = <45>;
+ ti,hwmods = "timer9";
+ ti,timer-pwm;
+ };
+
+ timer10: timer@48086000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48086000 0xfff>;
+ interrupts = <46>;
+ ti,hwmods = "timer10";
+ ti,timer-pwm;
+ };
+
+ timer11: timer@48088000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48088000 0xfff>;
+ interrupts = <47>;
+ ti,hwmods = "timer11";
+ ti,timer-pwm;
+ };
+
+ timer12: timer@4808a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4808a000 0xfff>;
+ interrupts = <48>;
+ ti,hwmods = "timer12";
+ ti,timer-pwm;
+ };
};
};
@@ -44,5 +44,13 @@
interrupt-parent = <&intc>;
ti,hwmods = "mcbsp2";
};
+
+ timer1: timer@48028000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48028000 0xfff>;
+ interrupts = <37>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
};
};
@@ -88,5 +88,13 @@
ti,buffer-size = <128>;
ti,hwmods = "mcbsp5";
};
+
+ timer1: timer@49018000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49018000 0xfff>;
+ interrupts = <37>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
};
};
@@ -12,6 +12,7 @@
/ {
compatible = "ti,omap3430", "ti,omap3";
+ interrupt-parent = <&intc>;
aliases {
serial0 = &uart1;
@@ -300,5 +301,100 @@
ti,buffer-size = <128>;
ti,hwmods = "mcbsp5";
};
+
+ timer1: timer@48318000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48318000 0xfff>;
+ interrupts = <37>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
+
+ timer2: timer@49032000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49032000 0xfff>;
+ interrupts = <38>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@49034000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49034000 0xfff>;
+ interrupts = <39>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@49036000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49036000 0xfff>;
+ interrupts = <40>;
+ ti,hwmods = "timer4";
+ };
+
+ timer5: timer@49038000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49038000 0xfff>;
+ interrupts = <41>;
+ ti,hwmods = "timer5";
+ ti,timer-dsp;
+ };
+
+ timer6: timer@4903a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4903a000 0xfff>;
+ interrupts = <42>;
+ ti,hwmods = "timer6";
+ ti,timer-dsp;
+ };
+
+ timer7: timer@4903c000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4903c000 0xfff>;
+ interrupts = <43>;
+ ti,hwmods = "timer7";
+ ti,timer-dsp;
+ };
+
+ timer8: timer@4903e000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4903e000 0xfff>;
+ interrupts = <44>;
+ ti,hwmods = "timer8";
+ ti,timer-pwm;
+ ti,timer-dsp;
+ };
+
+ timer9: timer@49040000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49040000 0xfff>;
+ interrupts = <45>;
+ ti,hwmods = "timer9";
+ ti,timer-pwm;
+ };
+
+ timer10: timer@48086000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48086000 0xfff>;
+ interrupts = <46>;
+ ti,hwmods = "timer10";
+ ti,timer-pwm;
+ };
+
+ timer11: timer@48088000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48088000 0xfff>;
+ interrupts = <47>;
+ ti,hwmods = "timer11";
+ ti,timer-pwm;
+ };
+
+ timer12: timer@48304000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48304000 0xfff>;
+ interrupts = <95>;
+ ti,hwmods = "timer12";
+ ti,timer-alwon;
+ ti,timer-secure;
+ };
};
};
@@ -430,5 +430,91 @@
hw-caps-ll-interface;
hw-caps-temp-alert;
};
+
+ timer1: timer@4a318000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4a318000 0x7f>;
+ interrupts = <0 37 0x4>;
+ ti,hwmods = "timer1";
+ ti,timer-alwon;
+ };
+
+ timer2: timer@48032000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48032000 0x7f>;
+ interrupts = <0 38 0x4>;
+ ti,hwmods = "timer2";
+ };
+
+ timer3: timer@48034000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48034000 0x7f>;
+ interrupts = <0 39 0x4>;
+ ti,hwmods = "timer3";
+ };
+
+ timer4: timer@48036000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48036000 0x7f>;
+ interrupts = <0 40 0x4>;
+ ti,hwmods = "timer4";
+ };
+
+ timer5: timer@49038000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x49038000 0x7f>;
+ interrupts = <0 41 0x4>;
+ ti,hwmods = "timer5";
+ ti,timer-dsp;
+ };
+
+ timer6: timer@4903a000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4903a000 0x7f>;
+ interrupts = <0 42 0x4>;
+ ti,hwmods = "timer6";
+ ti,timer-dsp;
+ };
+
+ timer7: timer@4903c000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4903c000 0x7f>;
+ interrupts = <0 43 0x4>;
+ ti,hwmods = "timer7";
+ ti,timer-dsp;
+ };
+
+ timer8: timer@4903e000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4903e000 0x7f>;
+ interrupts = <0 44 0x4>;
+ ti,hwmods = "timer8";
+ ti,timer-pwm;
+ ti,timer-dsp;
+ };
+
+ timer9: timer@4803e000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x4803e000 0x7f>;
+ interrupts = <0 45 0x4>;
+ ti,hwmods = "timer9";
+ ti,timer-pwm;
+ };
+
+ timer10: timer@48086000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48086000 0x7f>;
+ interrupts = <0 46 0x4>;
+ ti,hwmods = "timer10";
+ ti,timer-pwm;
+ };
+
+ timer11: timer@48088000 {
+ compatible = "ti,omap2-timer";
+ reg = <0x48088000 0x7f>;
+ interrupts = <0 47 0x4>;
+ ti,hwmods = "timer11";
+ ti,timer-pwm;
+ };
};
};
Add the 12 GP timers nodes present in OMAP2. Add the 12 GP timers nodes present in OMAP3. Add the 11 GP timers nodes present in OMAP4. Add the 7 GP timers nodes present in AM33xx. Add documentation for timer properties specific to OMAP. Please note that for OMAP2/3 devices, there is only one interrupt controller for the ARM CPU (which has the label "intc") and so globally define this as the interrupt parent to save duplicating the interrupt parent for all device nodes. Thanks to Vaibhav Hiremath for creating the AM33xx timer nodes. I have modified Vaibhav's original nodes adding information on which timers support a PWM output. Cc: Benoit Cousson <b-cousson@ti.com> Signed-off-by: Jon Hunter <jon-hunter@ti.com> --- .../devicetree/bindings/arm/omap/timer.txt | 30 ++++++ arch/arm/boot/dts/am33xx.dtsi | 61 +++++++++++++ arch/arm/boot/dts/omap2.dtsi | 86 ++++++++++++++++++ arch/arm/boot/dts/omap2420.dtsi | 8 ++ arch/arm/boot/dts/omap2430.dtsi | 8 ++ arch/arm/boot/dts/omap3.dtsi | 96 ++++++++++++++++++++ arch/arm/boot/dts/omap4.dtsi | 86 ++++++++++++++++++ 7 files changed, 375 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/omap/timer.txt