| Message ID | 1347902538-21208-2-git-send-email-mporter@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
* Matt Porter <mporter@ti.com> [120917 10:21]: > Adds pinctrl support to support OMAP platforms that boot from DT > and rely on pinctrl support to set pinmuxes. > > Signed-off-by: Matt Porter <mporter@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> > --- > drivers/spi/spi-omap2-mcspi.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c > index b2fb141..9502566 100644 > --- a/drivers/spi/spi-omap2-mcspi.c > +++ b/drivers/spi/spi-omap2-mcspi.c > @@ -38,6 +38,8 @@ > #include <linux/pm_runtime.h> > #include <linux/of.h> > #include <linux/of_device.h> > +#include <linux/pinctrl/consumer.h> > +#include <linux/err.h> > > #include <linux/spi/spi.h> > > @@ -1124,6 +1126,7 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) > static int bus_num = 1; > struct device_node *node = pdev->dev.of_node; > const struct of_device_id *match; > + struct pinctrl *pinctrl; > > master = spi_alloc_master(&pdev->dev, sizeof *mcspi); > if (master == NULL) { > @@ -1219,6 +1222,11 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) > if (status < 0) > goto dma_chnl_free; > > + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); > + if (IS_ERR(pinctrl)) > + dev_warn(&pdev->dev, > + "pins are not configured from the driver\n"); > + > pm_runtime_use_autosuspend(&pdev->dev); > pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); > pm_runtime_enable(&pdev->dev); > -- > 1.7.9.5 > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Monday 17 September 2012 10:52 PM, Matt Porter wrote: > Adds pinctrl support to support OMAP platforms that boot from DT > and rely on pinctrl support to set pinmuxes. > > Signed-off-by: Matt Porter <mporter@ti.com> > --- looks good to me. you may want to repost with Mark in cc to review. Acked-by: Shubhrajyoti D <shubhrajyoti@ti.com> > drivers/spi/spi-omap2-mcspi.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c > index b2fb141..9502566 100644 > --- a/drivers/spi/spi-omap2-mcspi.c > +++ b/drivers/spi/spi-omap2-mcspi.c > @@ -38,6 +38,8 @@ > #include <linux/pm_runtime.h> > #include <linux/of.h> > #include <linux/of_device.h> > +#include <linux/pinctrl/consumer.h> > +#include <linux/err.h> > > #include <linux/spi/spi.h> > > @@ -1124,6 +1126,7 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) > static int bus_num = 1; > struct device_node *node = pdev->dev.of_node; > const struct of_device_id *match; > + struct pinctrl *pinctrl; > > master = spi_alloc_master(&pdev->dev, sizeof *mcspi); > if (master == NULL) { > @@ -1219,6 +1222,11 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) > if (status < 0) > goto dma_chnl_free; > > + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); > + if (IS_ERR(pinctrl)) > + dev_warn(&pdev->dev, > + "pins are not configured from the driver\n"); > + > pm_runtime_use_autosuspend(&pdev->dev); > pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); > pm_runtime_enable(&pdev->dev); -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Sep 18, 2012 at 10:57:26AM +0530, Shubhrajyoti wrote: > On Monday 17 September 2012 10:52 PM, Matt Porter wrote: > > Adds pinctrl support to support OMAP platforms that boot from DT > > and rely on pinctrl support to set pinmuxes. > > > > Signed-off-by: Matt Porter <mporter@ti.com> > > --- > looks good to me. > you may want to repost with Mark in cc to review. > Acked-by: Shubhrajyoti D <shubhrajyoti@ti.com> Thanks...reposted this part with Mark cced. -Matt > > drivers/spi/spi-omap2-mcspi.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c > > index b2fb141..9502566 100644 > > --- a/drivers/spi/spi-omap2-mcspi.c > > +++ b/drivers/spi/spi-omap2-mcspi.c > > @@ -38,6 +38,8 @@ > > #include <linux/pm_runtime.h> > > #include <linux/of.h> > > #include <linux/of_device.h> > > +#include <linux/pinctrl/consumer.h> > > +#include <linux/err.h> > > > > #include <linux/spi/spi.h> > > > > @@ -1124,6 +1126,7 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) > > static int bus_num = 1; > > struct device_node *node = pdev->dev.of_node; > > const struct of_device_id *match; > > + struct pinctrl *pinctrl; > > > > master = spi_alloc_master(&pdev->dev, sizeof *mcspi); > > if (master == NULL) { > > @@ -1219,6 +1222,11 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) > > if (status < 0) > > goto dma_chnl_free; > > > > + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); > > + if (IS_ERR(pinctrl)) > > + dev_warn(&pdev->dev, > > + "pins are not configured from the driver\n"); > > + > > pm_runtime_use_autosuspend(&pdev->dev); > > pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); > > pm_runtime_enable(&pdev->dev); > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index b2fb141..9502566 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -38,6 +38,8 @@ #include <linux/pm_runtime.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> +#include <linux/err.h> #include <linux/spi/spi.h> @@ -1124,6 +1126,7 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) static int bus_num = 1; struct device_node *node = pdev->dev.of_node; const struct of_device_id *match; + struct pinctrl *pinctrl; master = spi_alloc_master(&pdev->dev, sizeof *mcspi); if (master == NULL) { @@ -1219,6 +1222,11 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev) if (status < 0) goto dma_chnl_free; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + if (IS_ERR(pinctrl)) + dev_warn(&pdev->dev, + "pins are not configured from the driver\n"); + pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT); pm_runtime_enable(&pdev->dev);
Adds pinctrl support to support OMAP platforms that boot from DT and rely on pinctrl support to set pinmuxes. Signed-off-by: Matt Porter <mporter@ti.com> --- drivers/spi/spi-omap2-mcspi.c | 8 ++++++++ 1 file changed, 8 insertions(+)