| Message ID | 1348240872-16068-1-git-send-email-balajitk@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Sep 21, 2012 at 8:51 PM, Balaji T K <balajitk@ti.com> wrote: > clock divisor can take a max value of 1023 > update code as per TRM so that card init can be handled with > higher IP clock frequencies from which clock to the card is > derived. > This is difficult to read without some punctuation / capitalization. > Signed-off-by: Balaji T K <balajitk@ti.com> > --- > drivers/mmc/host/omap_hsmmc.c | 5 +++-- > 1 files changed, 3 insertions(+), 2 deletions(-) > > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c > index d9af5f1..073b9ff 100644 > --- a/drivers/mmc/host/omap_hsmmc.c > +++ b/drivers/mmc/host/omap_hsmmc.c > @@ -75,6 +75,7 @@ > #define ICE 0x1 > #define ICS 0x2 > #define CEN (1 << 2) > +#define CLKD_MAX 0x3FF It'd be nice to have a comment on what 3FF stands for and it's relation to clock in MHz. > #define CLKD_MASK 0x0000FFC0 > #define CLKD_SHIFT 6 > #define DTO_MASK 0x000F0000 > @@ -478,8 +479,8 @@ static u16 calc_divisor(struct omap_hsmmc_host *host, struct mmc_ios *ios) > > if (ios->clock) { > dsor = DIV_ROUND_UP(clk_get_rate(host->fclk), ios->clock); > - if (dsor > 250) > - dsor = 250; > + if (dsor > CLKD_MAX) > + dsor = CLKD_MAX; Can these two lines be written in one line as "dsor &= CLKD_MAX; " ? > } > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Fri, Sep 21, 2012 at 10:28:00PM +0530, S, Venkatraman wrote: > On Fri, Sep 21, 2012 at 8:51 PM, Balaji T K <balajitk@ti.com> wrote: > > clock divisor can take a max value of 1023 > > update code as per TRM so that card init can be handled with > > higher IP clock frequencies from which clock to the card is > > derived. > > > This is difficult to read without some punctuation / capitalization. > > > Signed-off-by: Balaji T K <balajitk@ti.com> > > --- > > drivers/mmc/host/omap_hsmmc.c | 5 +++-- > > 1 files changed, 3 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c > > index d9af5f1..073b9ff 100644 > > --- a/drivers/mmc/host/omap_hsmmc.c > > +++ b/drivers/mmc/host/omap_hsmmc.c > > @@ -75,6 +75,7 @@ > > #define ICE 0x1 > > #define ICS 0x2 > > #define CEN (1 << 2) > > +#define CLKD_MAX 0x3FF > > It'd be nice to have a comment on what 3FF stands for and it's > relation to clock in MHz. > > > #define CLKD_MASK 0x0000FFC0 > > #define CLKD_SHIFT 6 > > #define DTO_MASK 0x000F0000 > > @@ -478,8 +479,8 @@ static u16 calc_divisor(struct omap_hsmmc_host *host, struct mmc_ios *ios) > > > > if (ios->clock) { > > dsor = DIV_ROUND_UP(clk_get_rate(host->fclk), ios->clock); > > - if (dsor > 250) > > - dsor = 250; > > + if (dsor > CLKD_MAX) > > + dsor = CLKD_MAX; > > Can these two lines be written in one line as > "dsor &= CLKD_MAX; " ? maybe: dsor = DIV_ROUND_UP(clk_get_rate(host->fclk), ios->clock); dsor = clamp_t(u16, dsor, 0, CLKD_MAX);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index d9af5f1..073b9ff 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -75,6 +75,7 @@ #define ICE 0x1 #define ICS 0x2 #define CEN (1 << 2) +#define CLKD_MAX 0x3FF #define CLKD_MASK 0x0000FFC0 #define CLKD_SHIFT 6 #define DTO_MASK 0x000F0000 @@ -478,8 +479,8 @@ static u16 calc_divisor(struct omap_hsmmc_host *host, struct mmc_ios *ios) if (ios->clock) { dsor = DIV_ROUND_UP(clk_get_rate(host->fclk), ios->clock); - if (dsor > 250) - dsor = 250; + if (dsor > CLKD_MAX) + dsor = CLKD_MAX; } return dsor;
clock divisor can take a max value of 1023 update code as per TRM so that card init can be handled with higher IP clock frequencies from which clock to the card is derived. Signed-off-by: Balaji T K <balajitk@ti.com> --- drivers/mmc/host/omap_hsmmc.c | 5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-)