| Message ID | 1348496201-6378-3-git-send-email-j-pihet@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Jean, Jean Pihet <jean.pihet@newoldbits.com> writes: > Remove the device dependent settings (cpu_is_xxx(), IP fck etc.) > from the driver code and pass them instead via the platform > data. > This allows a clean separation of the driver code and the platform > code, as required by the move of the platform header files to > include/linux/platform_data. > > Signed-off-by: Jean Pihet <j-pihet@ti.com> Could you make pdata change and the clock change should be two different patches? Also, your previous patch to align SR clock names should be combined with the changes made here. Some comments on the clock change below... > --- > arch/arm/mach-omap2/sr_device.c | 13 ++++++++++++ > drivers/power/avs/smartreflex.c | 40 ++++++++++-------------------------- > include/linux/power/smartreflex.h | 14 +++++++++++- > 3 files changed, 36 insertions(+), 31 deletions(-) > > diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c > index d033a65..2885a77 100644 > --- a/arch/arm/mach-omap2/sr_device.c > +++ b/arch/arm/mach-omap2/sr_device.c > @@ -122,6 +122,19 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) > sr_data->senn_mod = 0x1; > sr_data->senp_mod = 0x1; > > + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { > + sr_data->err_weight = OMAP3430_SR_ERRWEIGHT; > + sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT; > + sr_data->accum_data = OMAP3430_SR_ACCUMDATA; > + if (!(strcmp(sr_data->name, "smartreflex_mpu"))) { > + sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT; > + sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT; > + } else { > + sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT; > + sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT; > + } > + } > + > sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); > if (IS_ERR(sr_data->voltdm)) { > pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", > diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c > index 92f6728..7c03c90 100644 > --- a/drivers/power/avs/smartreflex.c > +++ b/drivers/power/avs/smartreflex.c > @@ -128,17 +128,16 @@ static irqreturn_t sr_interrupt(int irq, void *data) > > static void sr_set_clk_length(struct omap_sr *sr) > { > + char fck_name[16]; /* "smartreflex.0" fits in 16 chars */ > struct clk *sys_ck; > u32 sys_clk_speed; > > - if (cpu_is_omap34xx()) > - sys_ck = clk_get(NULL, "sys_ck"); > - else > - sys_ck = clk_get(NULL, "sys_clkin_ck"); > + sprintf(fck_name, "smartreflex.%d", sr->srid); hmm, isn't this the same as dev_name(&sr->pdev.dev) ? Combined with your earlier patch to align clock names, this should just be: sys_ck = clk_get(&sr->pdev.dev, "fck"); Also note that you've changed this from sys_clk to the SR functional clock, which seems to be the same clock on 34xx and 44xx, but that change should be clearly documented in the changelog. Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Kevin, On Wed, Oct 3, 2012 at 12:21 AM, Kevin Hilman <khilman@deeprootsystems.com> wrote: > Hi Jean, > > Jean Pihet <jean.pihet@newoldbits.com> writes: > >> Remove the device dependent settings (cpu_is_xxx(), IP fck etc.) >> from the driver code and pass them instead via the platform >> data. >> This allows a clean separation of the driver code and the platform >> code, as required by the move of the platform header files to >> include/linux/platform_data. >> >> Signed-off-by: Jean Pihet <j-pihet@ti.com> > > Could you make pdata change and the clock change should be two different > patches? Also, your previous patch to align SR clock names should be > combined with the changes made here. > > Some comments on the clock change below... > >> --- >> arch/arm/mach-omap2/sr_device.c | 13 ++++++++++++ >> drivers/power/avs/smartreflex.c | 40 ++++++++++-------------------------- >> include/linux/power/smartreflex.h | 14 +++++++++++- >> 3 files changed, 36 insertions(+), 31 deletions(-) >> >> diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c >> index d033a65..2885a77 100644 >> --- a/arch/arm/mach-omap2/sr_device.c >> +++ b/arch/arm/mach-omap2/sr_device.c >> @@ -122,6 +122,19 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) >> sr_data->senn_mod = 0x1; >> sr_data->senp_mod = 0x1; >> >> + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { >> + sr_data->err_weight = OMAP3430_SR_ERRWEIGHT; >> + sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT; >> + sr_data->accum_data = OMAP3430_SR_ACCUMDATA; >> + if (!(strcmp(sr_data->name, "smartreflex_mpu"))) { >> + sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT; >> + sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT; >> + } else { >> + sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT; >> + sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT; >> + } >> + } >> + >> sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); >> if (IS_ERR(sr_data->voltdm)) { >> pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", >> diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c >> index 92f6728..7c03c90 100644 >> --- a/drivers/power/avs/smartreflex.c >> +++ b/drivers/power/avs/smartreflex.c >> @@ -128,17 +128,16 @@ static irqreturn_t sr_interrupt(int irq, void *data) >> >> static void sr_set_clk_length(struct omap_sr *sr) >> { >> + char fck_name[16]; /* "smartreflex.0" fits in 16 chars */ >> struct clk *sys_ck; >> u32 sys_clk_speed; >> >> - if (cpu_is_omap34xx()) >> - sys_ck = clk_get(NULL, "sys_ck"); >> - else >> - sys_ck = clk_get(NULL, "sys_clkin_ck"); >> + sprintf(fck_name, "smartreflex.%d", sr->srid); > > hmm, isn't this the same as dev_name(&sr->pdev.dev) ? Yes. Atfer the previous patch "ARM: OMAP: hwmod: align the SmartReflex fck names" there is a direct mapping between the device name and the IP functional clock. Note: the mapping is based on the order of the hwmod entries and so it is important not to move them around. > Combined with your earlier patch to align clock names, this should just > be: > > sys_ck = clk_get(&sr->pdev.dev, "fck"); Great! That works great and the code is much more elegant. > Also note that you've changed this from sys_clk to the SR functional > clock, which seems to be the same clock on 34xx and 44xx, but that change > should be clearly documented in the changelog. Ok. Updated patch in a bit. > > Kevin Thanks for reviewing, Jean -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index d033a65..2885a77 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -122,6 +122,19 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + sr_data->err_weight = OMAP3430_SR_ERRWEIGHT; + sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT; + sr_data->accum_data = OMAP3430_SR_ACCUMDATA; + if (!(strcmp(sr_data->name, "smartreflex_mpu"))) { + sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT; + sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT; + } else { + sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT; + sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT; + } + } + sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); if (IS_ERR(sr_data->voltdm)) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index 92f6728..7c03c90 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -128,17 +128,16 @@ static irqreturn_t sr_interrupt(int irq, void *data) static void sr_set_clk_length(struct omap_sr *sr) { + char fck_name[16]; /* "smartreflex.0" fits in 16 chars */ struct clk *sys_ck; u32 sys_clk_speed; - if (cpu_is_omap34xx()) - sys_ck = clk_get(NULL, "sys_ck"); - else - sys_ck = clk_get(NULL, "sys_clkin_ck"); + sprintf(fck_name, "smartreflex.%d", sr->srid); + sys_ck = clk_get(NULL, fck_name); if (IS_ERR(sys_ck)) { - dev_err(&sr->pdev->dev, "%s: unable to get sys clk\n", - __func__); + dev_err(&sr->pdev->dev, "%s: unable to get smartreflex fck %s\n", + __func__, fck_name); return; } @@ -168,28 +167,6 @@ static void sr_set_clk_length(struct omap_sr *sr) } } -static void sr_set_regfields(struct omap_sr *sr) -{ - /* - * For time being these values are defined in smartreflex.h - * and populated during init. May be they can be moved to board - * file or pmic specific data structure. In that case these structure - * fields will have to be populated using the pdata or pmic structure. - */ - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - sr->err_weight = OMAP3430_SR_ERRWEIGHT; - sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT; - sr->accum_data = OMAP3430_SR_ACCUMDATA; - if (!(strcmp(sr->name, "smartreflex_mpu_iva"))) { - sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT; - sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT; - } else { - sr->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT; - sr->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT; - } - } -} - static void sr_start_vddautocomp(struct omap_sr *sr) { if (!sr_class || !(sr_class->enable) || !(sr_class->configure)) { @@ -922,8 +899,14 @@ static int __init omap_sr_probe(struct platform_device *pdev) sr_info->nvalue_count = pdata->nvalue_count; sr_info->senn_mod = pdata->senn_mod; sr_info->senp_mod = pdata->senp_mod; + sr_info->err_weight = pdata->err_weight; + sr_info->err_maxlimit = pdata->err_maxlimit; + sr_info->accum_data = pdata->accum_data; + sr_info->senn_avgweight = pdata->senn_avgweight; + sr_info->senp_avgweight = pdata->senp_avgweight; sr_info->autocomp_active = false; sr_info->ip_type = pdata->ip_type; + sr_info->base = ioremap(mem->start, resource_size(mem)); if (!sr_info->base) { dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); @@ -935,7 +918,6 @@ static int __init omap_sr_probe(struct platform_device *pdev) sr_info->irq = irq->start; sr_set_clk_length(sr_info); - sr_set_regfields(sr_info); list_add(&sr_info->node, &sr_list); diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h index 3101e62..09d5efc 100644 --- a/include/linux/power/smartreflex.h +++ b/include/linux/power/smartreflex.h @@ -260,8 +260,13 @@ struct omap_sr_nvalue_table { * * @name: instance name * @ip_type: Smartreflex IP type. - * @senp_mod: SENPENABLE value for the sr - * @senn_mod: SENNENABLE value for sr + * @senp_mod: SENPENABLE value of the sr CONFIG register + * @senn_mod: SENNENABLE value for sr CONFIG register + * @err_weight ERRWEIGHT value of the sr ERRCONFIG register + * @err_maxlimit ERRMAXLIMIT value of the sr ERRCONFIG register + * @accum_data ACCUMDATA value of the sr CONFIG register + * @senn_avgweight SENNAVGWEIGHT value of the sr AVGWEIGHT register + * @senp_avgweight SENPAVGWEIGHT value of the sr AVGWEIGHT register * @nvalue_count: Number of distinct nvalues in the nvalue table * @enable_on_init: whether this sr module needs to enabled at * boot up or not. @@ -274,6 +279,11 @@ struct omap_sr_data { int ip_type; u32 senp_mod; u32 senn_mod; + u32 err_weight; + u32 err_maxlimit; + u32 accum_data; + u32 senn_avgweight; + u32 senp_avgweight; int nvalue_count; bool enable_on_init; struct omap_sr_nvalue_table *nvalue_table;
Remove the device dependent settings (cpu_is_xxx(), IP fck etc.) from the driver code and pass them instead via the platform data. This allows a clean separation of the driver code and the platform code, as required by the move of the platform header files to include/linux/platform_data. Signed-off-by: Jean Pihet <j-pihet@ti.com> --- arch/arm/mach-omap2/sr_device.c | 13 ++++++++++++ drivers/power/avs/smartreflex.c | 40 ++++++++++-------------------------- include/linux/power/smartreflex.h | 14 +++++++++++- 3 files changed, 36 insertions(+), 31 deletions(-)